Solder Rework Stations

Materials & Material Processing

Rework System is designed for very large PCBs.

November 17, 2014

With icon-based GUI via SierraMate v9, Summit LXi features board support table that accommodates assemblies up to 24 x 36 in. and incorporates 8.0 kW bottom heater. Closed-loop control for heater gas flow, combined with thermocouple feedback and heater power management strategy, enables accurately matching of each system. Control system eliminates effects of facility variations and supports precise calibration, and process parameters can be shared between systems in multiple locations. Read More

Machinery & Machining Tools, Materials & Material Processing

Rework Station supports small- and large-scale circuit boards.

September 3, 2014

Compatible with all kinds of rework and SMT component types, including 01005s, RD-500V Rework Station features 2 MP full HD camera with 19 in. LCD for visual alignment. System samples data in intervals of 0.1 sec, allowing accurate temperature control. Equipped with built-in 1,000 W heaters on both top- and bottom-side, and area heater that includes six 600 W IR heaters, station can execute precise profiling including detailed temperature curves with ability to closely control up to 30 zones. Read More

Materials & Material Processing

Solder Ball Placement Kit reworks small components.

July 23, 2014

When added to hot air pencil, Solder Ball Placement Kit provides complete solution for reworking most small chip components, such as 01005, 0201, 0402, and 0602s. Kit contains: 2,000 each of .04, .06, .08, and .10 mm solder balls with container; 4 ESD-safe carbon fiber reinforced oilers; one part positioning matrix and squeegee; one PEEK spudger; one bent tweezers; one half tweezers; and one 5,000 grit sharpening stone. Read More

Materials & Material Processing

Selective Soldering Systems feature optimized life cycle.

June 26, 2014

To help increase component life cycle and reduce maintenance requirements, RPS Selective Soldering Systems are available with nitrogen preheat unit with integrated thermocouple. Systems support ability to flux and solder mix of changing and complex assembly requirements, including tall and odd size components, tight keep aways, thermal demands, and thermal limitation. Preheat unit ensures precise thermocouple placement, which is essential for providing consistent temperature measurements. Read More

Machinery & Machining Tools, Materials & Material Processing

Rework System offers automation and mobility options.

March 19, 2014

Scorpion Rework System is available with Automatic Placement Package, capable of 50 mm of motorized travel in Z-axis and full 360° in ϴ (Theta), that offers fine motor control in Z-axis and ϴ during alignment of component to pad. Force feedback control during placement process enables unit to accurately pick and place components without disturbing component or solder. System is also available in Mobile version with 1080p, HD camera system that fosters accurate alignment and positioning. Read More

Machinery & Machining Tools, Materials & Material Processing

Digital Hot Air Pencil suits small component applications.

November 13, 2013

Equipped with 120 W ceramic heater and dual stage air pump, Model HCT2-120 is suited for applications that use small components and integrated circuits. Two LED displays provide graphical and numerical representation of desired airflow and temperature. Supplied with 6 nozzles, work stand with nozzle plate holder, and nozzle removal pad, handheld convection tool allows users freedom to access and rework components on board without affecting adjacent parts. Read More

Materials & Material Processing

Soldering and Rework System features benchtop form factor.

November 11, 2013

With SmartHeat™ Technology for responsive and controlled heating, benchtop model MX-500 delivers energy needed to ensure precise and reliable solder connection. Features include switchable, dual-port, 40 W operation; ground fault interrupt; and universal power supply. Also, unit is compatible with existing MX-500 products: MX upgrade kits, tip-cartridges, and accessories. Read More

Machinery & Machining Tools, Materials & Material Processing

Rework System offers side-view camera upgrade.

May 8, 2013

Available for Scorpion Rework System, Side-View Camera Upgrade Kit facilitates visibility of reflow during rework process and helps operator set placement height of vacuum and reflow nozzles. Kit features high magnification optics, CMOS sensor camera with USB 2.0 connection, and picture-in-picture functionality, eliminating need for second monitor. Adjustable double articulated arm provides camera mount, while LED lighting lets operator direct light onto part from different angles. Read More

Machinery & Machining Tools, Materials & Material Processing

Soldering Desoldering Rework System has dual simultaneous ports.

December 4, 2012

Metcal MX-5200 provides dual simultaneous use option, where 2 hand-pieces can work from one power supply at same time. Dynamic option lets 2 hand-pieces share 80 W output power based on demand, promoting application flexibility and speed. SmartHeat™ Technology promotes responsive, controlled heating and delivers exact amount of energy needed to ensure precise, reliable solder connection. Simultaneous dual operation is supported by 4 hand-pieces and various soldering and rework cartridges. Read More

Machinery & Machining Tools, Materials & Material Processing

Rework Station is designed to work with heavy substrates.

June 20, 2012

Used to rework LEDs and power components on metal or ceramic boards from 30 x 30 mm to 300 x 300 mm, EXPERT 04.6IXM is designed for applications where substrates need to be heated quickly up to 200°C and without overshoot. Single-sided PCBs are placed on glass plate heated with IR radiators rated at up to 3,000 W. Dual manipulator arms, each with movement lock, individually carry placement tool and hot air solder pen to cover entire working area. Read More

Materials & Material Processing

SMD Rework System removes, places, and solders BGAs, CSPs, QFPs.

July 8, 2011

Compatible with delicate SMD packages, BR810 has adjustable PCB holder that accepts PCBs up to 18.5 x 13.8 in. as well as split-vision optics with 22x electronic zoom and focus controls and LED lighting. Additional features include profile settings for independent and programmable top and bottom heating, 5 separate thermocouple inputs, control software, and LCD touchscreen display. Capable of micrometer adjustments, system offers automated Z-axis motion with vertical height sensing. Read More

Machinery & Machining Tools, Materials & Material Processing

Selective Soldering System delivers dual lane processing.

May 19, 2011

To promote productivity and throughput, KISS-205 splits process of fluxing, preheating, and soldering. Dual-lane processing with crossover sequencing enables more than one product to be processed in one lane while another is undergoing different stage in process. In addition to dual universal PCB edge conveyor, this in-line, SMEMA-compatible machine incorporates dual pre-heater modules, automated fiducial XY and skew correction, volumetric spray fluxer, and drop jet fluxer. Read More

Machinery & Machining Tools, Materials & Material Processing

Soldering and Rework Systems provide single output.

August 13, 2010

Suited for production soldering, touch-up soldering, and SMD rework, MFR-1100 Series incorporates SmartHeat® Technology, which dynamically responds to load, delivering required energy for each connection, while protecting sensitive components and substrates from damage. MFR-H1-SC hand-piece offers range of soldering and rework cartridges, while MFR-H2-ST hand-piece supports production soldering, and MFR-H4-TW Precision Tweezers hand-piece is suited for SMD removal of 0201 resistors to 28 mm SOIC. Read More

Machinery & Machining Tools, Materials & Material Processing

Soldering and Rework System offers dual output capability.

November 3, 2009

Suited for production soldering, touch-up soldering, and SMD rework, MFR-2200 Series features SmartHeat® power and control technology, which responds to load, delivering energy required for each connection, while protecting sensitive components and substrates from damage. One or two hand-piece operation is chosen via front panel switch. With 2 separate power supplies, full power is available for each hand-piece that is in use. Three handpiece options are available. Read More

Material Handling & Storage, Materials & Material Processing

Soldering/Rework System is offered with precision tweezers.

October 30, 2009

Soldering and rework system, MX-500, is available with MX-PTZ precision tweezer hand-piece that is ergonomically designed to meet requirements for reworking small electronic components, including 0201. Tweezers enable user to remove and replace components, with targeted application of heat, to soldered connections of devices while mechanically gripping component for removal. Tweezer-action and dual-position pitch adjustment enable operator to size pincer-action to component width. Read More

Materials & Material Processing

Soldering and Rework Systems suit complex assembly.

November 3, 2008

Coupling SmartHeat® Technology with 80 W of power, Metcal MX-5000 Series provides instantaneous response to load conditions, ensuring system will not overshoot while recovering in seconds. Microprocessor-controlled systems also incorporate built-in digital power indication display, providing users with continuous feedback. Available with choice of 4 different hand-pieces, systems offer Metcal TipSaver(TM) Workstand with Auto-Sleep to minimize power use and extend tip life. Read More

Materials & Material Processing

Multifunctional Rework System delivers process control.

October 29, 2008

Used for thermally demanding applications, MFR-1100 Series Single Output Soldering and Rework System is powered by SmartHeat® Technology. MFR-H1-SC Cartridge Hand-piece offers soldering and rework cartridges that provide fine access, SMD rework, and pad clean-up, while tip-equipped MFR-H2-ST delivers soldering performance required by lead-free and production soldering environments. Also available, MFR-H4-TW Precision Tweezer Hand-piece is capable of removing small discrete components. Read More

Materials & Material Processing

Soldering Station is designed for Pb-free processes.

July 11, 2008

With up to 140 W of power, BT 8808 promotes throughput while working at lower temperatures. This fosters solder joint reliability and eliminates cold joint issues. For optimal thermal recovery times, station uses microprocessor-driven JBC Advanced Technology. Read More

Materials & Material Processing

Soldering and Rework System comes with SmartHeat® technology.

April 22, 2008

With ability to operate 1 or 2 handpieces at same time by flip of switch, MFR-2200 Series Soldering and Rework System features SmartHeat® Technology that assures responsive and highly controlled heating. Suited for production hand soldering, touch-up, and SMD rework, it includes cartridge handpiece with various fine access and SMD rework tips, high power soldering tip handpiece, and precision tweezer handpiece that can remove range of components from 0201 chips to 28 mm SOICs. Read More

Materials & Material Processing

Solder/Rework Station removes or resolders components.

December 12, 2007

With temperature range up to 350°C, benchtop Model 855 meets thermal demands of lead-free processing. System includes push-button settings for temperature, air flow volume, and duration. When activated, unit proceeds automatically through 3 preheating zones and 2 reflow zones before auto shutoff when cycle is completed. Six-piece system includes process controller, PCB retention fixture, hot air wand, vacuum suction pen, adjustable ceramic underheater, and cool-down fan. Read More