Panel Cutting Machines

Machinery & Machining Tools

Plate Cutting Machine brings basics and more to smaller workshops.

June 6, 2016

Engineered to meet demands of smaller workshops, Voortman V302 delivers all basic functionalities and can be delivered with plasma cutting torch, oxy-fuel torch, or plasma/oxy-fuel-combination. Features include Voortman Height Control (VHC), Xtensive Hole Performance technology, and onboard, intuitive software system with diagnostic capabilities. This compact plate cutting machine also supports integration with high-definition plasma cutting systems. Read More

Machinery & Machining Tools

Depaneling Machine separates metalized LED boards.

June 26, 2015

With max speed of 400 mm/sec, Model CL-100 can handle single-sided, metalized, or FR-4 panels of any length, with thicknesses from 0.8-3.5 mm. Machine uses 3 sets of round knives that are positioned at different heights to separate in 3 sequential steps. By using starting and ending table to lay panel, motor-driven machine enables operator to feed panel into and through knives. Table comes in standard length of 7.8 ft with 3.5 ft at front and 3.5 ft at rear. Read More

Machinery & Machining Tools

Carton Singulator retrofits into existing convey and sort systems.

November 18, 2014

Able to be retrofitted into existing convey and sort systems or implemented with new ones, carton singulator aligns skewed and side-by-side cartons for proper orientation prior to sorting. Operation improves carton orientation and alignment, thereby optimizing performance of downstream sorter, while promoting merge performance and system uptime. Conveyor is modular and 24 ft long, and installation can occur during off-shift timeframes as to not affect daily operations. Read More

Machinery & Machining Tools

PCB Depaneling Routers include vision system.

June 25, 2014

Featuring floor-mounted design, SM3320S-S Single Table, SM3350S-D Twin Table, and SM4520L-D Twin Table come equipped with built-in color CCD camera with 20x magnification that assists programming and allows users to watch operation. Routers program cutting path with controls that are saved, edited, and copied, and use vision system to check fiducials before cutting starts. Ball-screw and linear guides maintain accurate repeatability of ±0.03 mm. Read More

Architectural and Civil Engineering Products, Machinery & Machining Tools

Creative Pultrusions to Market and Manufacture TRANSONITE® Panel System

April 17, 2014

Alum Bank, PA – Creative Pultrusions, Inc. (CPI) and Ebert Composites Corporation (ECC) have entered into a manufacturing and marketing agreement, whereas CPI will house three TRANSONITE® production machines at their Alum Bank, Pennsylvania, manufacturing facility. The TRANSONITE® panel will be marketed to an array of industries where lightweight, corrosion resistant, multidirectional... Read More

Machinery & Machining Tools, Material Handling & Storage

Die-Singulation System features plasma-based operation.

September 30, 2013

Utilizing energized plasma, MicroDieSingulator (MDS)-100 systems deliver singulation of semiconductor dies from 4, 6, and 8 in. wafers mounted on industry-standard tape frames. Singulation (dicing) of individual dies can be achieved with separation lines (streets) of 20 microns or less, maximizing utilization of silicon-wafer real-estate. Also, MDS technology separates dies without causing lateral damage from stress-induced cracking, overheating, or re-deposition of ablated material. Read More

Machinery & Machining Tools

Safely Singulate Circular Tab Routed PCBs

December 28, 2011

The FKN Systek N200 punch depanelizes odd shaped boards. The N200, is a top down air operated punch for separating tab routed Panels one tab at a time. An upper and lower matching knife blade is used to pinch the tabs apart. This method produces less stress on the PCB than a punch and die since the cutting action takes place from both sides.<4444>The standard die set consists of an upper and... Read More

Machinery & Machining Tools

PCB Guide Rails facilitate depaneling process.

September 7, 2011

Suitable for thin pre-scored printed circuit cards measuring .060 in. thick or less, K3000 Linear Blade PCB Singulators assure score-line of PCB matches up with linear blade of K3000 depanelizer, preventing blade run out. USA-made depanelizers come in 18 and 24 in. blade versions with adjustable front and back table that can be tilted, allowing separated panels to slide onto conveyor line. Adjustable blade guards on each side of circular blade protect operator. Read More

Machinery & Machining Tools, Material Handling & Storage

ecoSplit-IXL - the 'Racer' among Wafer Singularization Systems

February 18, 2010

Throughput up to 4,300 wafers per hour<4444>Zimmern - When it comes to separating solar wafers fully automatically before final cleaning, the ecoSplit IXL really defines the standards set by ACI-ecotec. One reason for this is the extremely high throughput - a customized system designed by ACI-ecotec separates 4,300 wafers per hour. Other factors which convince wafer manufacturers to purchase the... Read More

Machinery & Machining Tools, Material Handling & Storage, Green & Clean

Wafer Singulation System meets crystalline PV industry needs.

September 11, 2009

Dealing with accurate separation of wafers, SingFlow(TM) is fully controlled with automatic compensation for wafer thickness variation and also offers automatic detection/sorting of broken wafers. Stress-free, pure-shear singulation concept delivers fully automated production system that promotes efficiency, throughput, and yield. Modular design, based on throughput requirements, supports output to different configurations of lane-based cleaning systems and/or cassette loading. Read More

Machinery & Machining Tools

Tools for Singulating Tab Routed PCB Panels

March 31, 2009

Video of the N200 punch shows separation of round and odd shaped panels without dust. <4444>Tab routed PCBs come in many shapes and sizes. Choosing the right tool for singulating these types of panels means matching the panel type and production quantites to the capacity of the equipment. Now you can check out videos showing the different tools and how they operate, at See whether... Read More

Machinery & Machining Tools, Material Handling & Storage

Conveying System takes up minimum amount of floor space.

January 16, 2009

Utilizing image processing and matrix of several belt conveyors, Visicon Singulator is designed to singulate items with appropriate gap between them and to align them for further sortation downstream. System can singulate up to 9,000 items/hr continuously without recirculation, minimizing required floor space. Software-based control system makes it possible to stipulate important singulation parameters such as gapping, orientation, and left or right take-away direction. Read More

Machinery & Machining Tools

PCB Depanelizer can singulate long circuit boards.

August 1, 2008

Capable of singulating skip routed PCB panels up to 24 in. long, Model K4000 motorized linear blade depanelizer features height adjustable front and back support, take up table, and right and left blade guards that ensure operator safety. It is offered with optional light beam safety curtain across front of blades and conveyor belt to bring singulated PCBs to side for easy removal. IR sensor on end of conveyor stops belt for PCBs with components on them. Read More

Machinery & Machining Tools

Depaneling System suits traditional PCBs and large multi-UPS.

April 30, 2003

Stand-alone Model SR1200 is capable of rout speeds up to 4 ips and saw speeds to 8 ips, with servo repeatability of ±0.005 in. Dual-pallet work area allows concurrent loading and reloading of panels. Because each pallet is fixtured independently, different product types can be processed during same production run. Routing window is 13.8 x 13.8 in. Saw/Router Flex Technology(TM) makes system suitable for both standard panel layouts and closely spaced PCBs. Read More

Machinery & Machining Tools

Panel Cutter suits steel construction applications.

April 16, 2003

Model TPC 150-2 cuts sandwich panels up to 6 in. thick in one cut without flipping sheet. Capable of making burr-free, precision cuts, tool does not require users to drill starter holes or refinish completed cut edge. With output of 1,400 W, unit reaches working speeds of up to 98 ipm and is available in 3 and 6 in. lengths. Handles are located in line with cut line for two-handed operation. Guide rail and connection for vacuum cleaner are available. Read More

Machinery & Machining Tools, Vision Systems

Depaneling Vision System performs multiple tasks.

April 10, 2003

Vision system on depaneling platforms provides for consistent, accurate routing and is capable of performing fiducial recognition, edge recognition, panel and board verification, and automatic product program selection. System uses software engine and frame grabber for camera image processing and compensates for different environmental effects with adjustable lighting. Programming interface allows for setup and modification of all features. Read More

  • 1