Fletcher-Terry Company, LLC    East Berlin, CT 06023
May 10, 2012 Suitable as table-top or wall-mounted cutter, Model F-60 includes plastic knife cartridge, lock down pressure clamp, and lock-and-cut feature. Cutting table is fabricated from 1.5 mm sheet metal and features built-in squaring arm and measuring graphic grid. Permanently molded into plastic cartridge, .015 in. thick blade contains 4 measuring settings indicating depth of cut. With cutting capacity of 62 in., Model F-60 is suitable for variety of semi-rigid and flexible substrates.

Walter USA, Inc.    Waukesha, WI 53188
May 04, 2012 Designed for extended life and process reliability in machining of steel, Prototyp Protoomax(TM) ST maximizes removal rates via geometry that provides stability for cutting edges as well as surface treatment on shank that affords firm grip. Diameters are available from 1/16-¾ in., and respective helix angles of 45° and 50° on 3- and 4-flute designs promote chip evacuation and surface finish quality. Variable flute spacing on 4-flute model reduces harmonics that can cause vibration.

Pepperl+Fuchs    Twinsburg, OH 44087
Apr 26, 2012 Following AS-Interface specification 3.0, G10 AS-Interface Accessories include IP69K washdown-rated splitters and network terminator. One model provides flat cable connection for both AS-Interface and auxiliary power, and includes two M12 round cable connections, enabling 2 devices to be split off from one accessory. In addition to gold-plated piercing contacts, accessories have mounting holes in base, plastic cover with visible wiring instruction, and pass-through auxiliary flat cable tray.

Walter USA, Inc.    Waukesha, WI 53188
Mar 29, 2012 Featuring medium pitch for low horsepower machines and difficult to fixture workpieces, Xtraotec® F4045 has negative-shaped inserts with 14 cutting edges, 7 per side. Inserts are pressed with positive rake face and are locked securely in seats by clamping system. F4045 comes with Tigerotec Silver coating or PVD Tigerotec grade WKK25 for especially difficult machining conditions. Tigerotec Silver consists of aluminum oxide coating that resists crater and flank wear as well as plastic deformation.

Sumitomo Electric Carbide    Mount Prospect, IL 60056
Mar 29, 2012 Designed to minimize time associated with rough milling and finishing of non-ferrous materials, WAX Wave Mill Series features safety-oriented design that prevents tool failure by inhibiting insert dislodgement that can result from centrifugal force. Diamond-like carbon coating applied to inserts promotes adhesion resistance. With these features, WAX Series offers optimal ramping and helical milling of aluminum alloys.

SAS Automation, Ltd.    Xenia, OH 45385
Mar 16, 2012 Offering alternative to handheld units, Machine-mounted Heated Nipper features standard nipper configuration with machine mounting holes, interchangeable blades with heating coils, and variable temperature control with digital readout for fine tune adjustment. With automatic thermostat for consistency, this standard, off-the-shelf, heated sprue nipper is suited for cutting difficult, brittle material such as polycarbonate or glass filled nylon.

Walter USA, Inc.    Waukesha, WI 53188
Mar 05, 2012 Available for threads M3-M16, TMC Thread Milling Cutter is made of wear-resistant ultra-fine-grade carbide with multilayer TiCN coating. Tool features helix angle of 27° with shortened flute run-out and internal coolant supply from as low as thread size M4. Suitable for use on all materials up to hardness of 48 HRC, cutter is also available in uncoated version.

Dapra Corporation    Bloomfield, CT 06002
Feb 29, 2012 Part of RHINO-FEED(TM) line, Mid-Feed Cutters are optimized for cuts of 1-3 in. diameter and max depth of .045 in., with 10 mm inscribed circle inserts featuring 4 usable edges. End mills, shell mills, and modular heads are available with 2, 3, 5, or 6 flutes. Mid-Feed cutters are suited for light-duty machines running at moderate FPT. RHINO-FEED line adjusts feed rates to compensate for chip thinning that occurs during high-feed milling when extreme lead angle is utilized.

Walter USA, Inc.    Waukesha, WI 53188
Dec 29, 2011 Available in 80-200 mm diameters with max cutting speeds from 5,000-7,000 m/min, Valenite F4050 utilizes high-tensile steel cartridges with brazed PCD carbide tips. Adjusting key guarantees micron-precise runout of cartridges, while carbide chip deflector handles heavy chip production from roughing and finishing operations. Cartridges are available with 90° clearance angle and cutting depths up to 4 mm, or 75° clearance angle and cutting depths up to 1.1 mm.

PDC International Corp.    South Norwalk, CT 06854
Dec 15, 2011 Custom-engineered for cutting and perforating operations in tamper-evident banders and shrink sleeve labelers, PDC blade assemblies are manufactured from tool steels for wearability, toughness, flatness, and edge profile uniformity. Blades operate dust-free; eliminate hairs typical of spinning knife systems while delivering precise cuts for months, even under continuous, high-speed conditions; and can be re-sharpened multiple times. Double-edged (reversible) versions are available.

BIG Daishowa Seiki Co., Ltd.    Hoffman Estates, IL 60192
Dec 06, 2011 Intended for plunge-chamfering of holes, fixed-angle C-Cutters include two 30° tools for 16-85 mm dia holes and three 60° tools for 14-65 mm dia holes. Adjustable nozzles direct coolant efficiently to point of cutting, allowing feed rates to 0.6 mm/rev and speeds to 240 mm/min. Also available, Universal C-Cutter enables chamfers as shallow as 5° with minimum hole diameter of 5.5 mm and as steep as 85° with minimal hole diameter of 38.8 mm.

On Demand Machinery    Elizabeth, NJ 07206
Nov 23, 2011 Measuring 36 x 26 x 34 in., Slicer(TM) is designed to cut perfect 45º corners on cover sheets (up to 1 in. stack height) prior to casemaking process of producing hard cover. Hand-operated machine makes perfect symmetrical corner cut every time, minimizing cover material stock waste. Optional stand is available, and tabletop is bolted into heavy-duty steel legs with bottom shelf storage rack for cover stock.

J.E. Grote Company, Inc    Columbus, OH 43230
Nov 08, 2011 For purpose of sanitation, 530E model features sloped and hermetically sealed framing as well as open frame design with all control electronics located outside main body. Additional features include solid nylube clevis on main crank arm, scalloped bearing bar support mounts, and curved thickness tray that removes without tools. Built to survive harsh wash down environments, system features clutchless cluster drive system (electric models only) and full 6 in. stroke capability.

Bosch Packaging Technology    New Richmond, WI 54017
Oct 13, 2011 Using ultrasonic technology, Model WRQ 0400 US cuts product arriving in mass ropes into individual bars and applies minimum pressure while cutting to preserve product quality. Knife ensures that product does not stick to surface of blades, making system suitable for cutting sensitive, sticky, laminated, or layered products. Capable of producing 80 cuts/min, Model WRQ 0400 US has max cutting height of 30 mm and can be adjusted to handle cutting lengths from 20-200 mm.

Walter USA, Inc.    Waukesha, WI 53188
Oct 05, 2011 Walter Valenite ISO indexable inserts are designed for machining nickel, cobalt, and iron-based, high-temperature alloys. NRS geometry, useful for roughing operations, and NMS geometry, targeting medium machining and semi-finishing operations, are designed for turning operations and feature cutting edge design that minimizes effect of wear. Also, PVD-aluminum oxide coating (grades WSM10 and WSM20) provides heat resistance and promotes accelerated cutting.

Walter USA, Inc.    Waukesha, WI 53188
Sep 20, 2011 Prototyp ConeFit(TM) solid carbide milling system is available with spade-type compression molded, changeable cutting heads suited for copy and plunge milling, chamfering, centering, and spot-facing holes. For graphite machining, PCD coated N50 variants are available as 4-flute cutters with corner radius and as double-edged, ball-nose end mills. Protoomax(TM)ST end mill provides maximum metal removal during roughing and finishing of steel, including stainless, and four-flute variant is also offered.

Walter USA, Inc.    Waukesha, WI 53188
Aug 22, 2011 Providing wear and shock resistance, CVD-Al2O3-coated Tiger-tec® Silver WKP25S maximizes productivity through ability to process all steels at high cutting speeds. Product features bicolor coating that facilitates wear detection. Grade is also suitable for machining tool steels with strengths greater than 1,000 N/mm² and when used in difficult conditions such as wet machining. In addition, WKP25S excels in machining of gray cast iron or cast iron containing vermicular graphite.

Dapra Corporation    Bloomfield, CT 06002
Jul 13, 2011 Optimized for cuts of 1.250-4.000 in. dia, RHINO-FEED(TM) Heavy-Feed cutters and inserts allow for accelerated feed rates in moderate- to heavy-DOC and -FPT applications. Heavy-Feed 12 mm IC (inscribed circle) inserts have 4 usable edges and strong cross-section. End mills and shell mills feature top clamping strength suitable for heavier DOC (up to .060 in.) and larger machines, such as 50-taper and box ways.

BLM Group USA    Wixom, MI 48393
Jun 10, 2011 Tube cutting system TC720 operates as stand-alone unit or as part of automated tube processing line controlled by single CNC, integrating downstream functions such as deburring, washing, drying, and accumulating. Programming system automatically selects optimum parameters for job at hand, and complete changeover can be accomplished in less than 3 min with all settings centralized and to scale. Saw performs cutting of square and rectangular sections with slideway mounted cutting head.

RIDGID    Elyria, OH 44035
Jun 10, 2011 Featuring capacity up to 1 5/8 in. OD, Model TC-40 cuts polyethylene, polypropylene, PEX, rubber hose, PVC, and CPVC. Unit features 75 W motor that drives pointed X-CEL® blade to provide square, precise cut in 4 seconds. Repeat cuts can quickly follow with use of push-button blade release. Forward and reverse blade operation is possible via single trigger on front of tool. Powered by detachable 12 V Li-ion battery, TC-40 can make up to 250 cuts/charge.