YCI, Inc.
Santa Fe Springs, CA 90670
Jul 15, 2008 Along with rigid box structure base, V500 and V650 employ THK linear guideways, C1 class ballscrews with cryogenic treatment, and ac servo motor to promote cutting precision. Both utilize Windows XP-Embedded control OS and incorporate 15 in. TFT touchscreen, as well as RTX real-time extension software. Threading is done directly at break point, with no need to return to starting point upon wire breakage. With double door design, V650 is capable of reaching 320 mm²/min.

Coe Press Equipment Corp.
Sterling Heights, MI 48310
Nov 13, 2007 Combining unwinding, straightening, and feeding of coil stock, SpaceMaster Series 1 is available in 4 model sizes to process maximum coil widths of 12, 16, 20, or 24 in. Units can handle coil thicknesses to .125 in., coil ODs to 60 in., and max coil weight of 4,500 lb. Each system is mounted on common machine base, helping to maximize rigidity during feeding process. Overall footprint ranges from 12-15 ft.

Dallas Industries, Inc.
Troy, MI 48083 2770
Jul 26, 2005 Space-Saverâ„¢ Electronic Servo Press Feed System incorporates piloting design into integral pull-thru straightener. Suited for lines that may be used to straighten or feed materials of 0.035 in. thickness or greater, Toggle Link Motion Straightener configuration ensures all upper rolls of mechanism are raised to equal height. This releases tension between upper and lower rollers of straightener during feed operation's pilot pin orientation of material.

On Demand Machinery
Elizabeth, NJ 07206
Feb 28, 2005 Straightener removes curl from warped cover boards that can occur during manufacturing process or casemaking. Operator feeds warped material into machine where it is run through 3-roller dewarping station. Amount of dewarping action is controlled with hand tightened adjustment knobs located on top of machine. When boards exit machine, they enter material catching basin. Machine takes up 40 x 48 in. floor space and handles boards up to 30 in. wide.

Witels Albert USA, Ltd.
East New Market, MD 21631
Jan 19, 2005 Model ERS HL PO offers high straightening forces for high-strength process materials with diameter or cross-sectional height of 5.0–40.0 mm. Adjustment force of a few Newtons applied manually by operating personnel is converted into adjusting force of up to 300 kN by hydraulic system, with straightening roll being positioned with accuracy of approximately 0.01 mm. Straightener requires no downstream elements such as controllers, software, and control terminals.

Vaughan & Bushnell Mfg. Co.
Hebron, IL 60034
Jan 23, 2004 Used in horizontal, vertical, or overhead position, BowJakâ„¢ is tapped in next to bowed board, and with leverage from pull handle, straightens board before it is hammered into place. Operation can close gaps up to 2¼ in. wide. Weighing only 26 oz, BowJakâ„¢ can be easily moved from job to job and fits in most tool pouches.

Sesco Products Group
Sterling Heights, MI 48310
Jan 27, 2003 Model CSF handles coil weights from 10,000–60,000 lb and up to 120,000 psi yield material. It accommodates material thicknesses of .040–.750 in. Main unit consists of 1 set of feed rolls, 7 straightening rolls, and 1 set of input threading rolls. Multi-pitch gear train directly drives upper and lower feed rolls throughout feeding process. Solid steel 2-roll coil rest supports and pays off material.

Wagner Companies, The
Bulter, WI 53007
Aug 19, 2002 Portable Straightening Press allows on-site aligning of round and rectangular, wrought-iron railings, doors, and gates. It handles up to 2 in. pipe, 2.75 in. square tube, and 2 in. solid bar. Made of cast aluminum, it weighs 28 lb, measures 19 x 12 in., and withstands pressures up to 5 tons. Support blocks allow for adjustment of various sizes of materials. Material to be aligned is placed between 2 counter supports and pressure rolled via hand-lever.

Aries Electronics, Inc.
Bristol, PA 19007-6810
Apr 23, 2002 DIP-R-SIZER(R) provides static protection while straightening pins on 0.300 or 0.600 in. center DIP ICs. Tool eliminates need for anti-static devices or complex pin straightening equipment. In use, device to be straightened is placed inside tool and squeeze brings leads into tolerance of 0.320 or 0.620 in.

Coe Press Equipment Corp.
Sterling Heights, MI 48310
Apr 22, 2002 Series 250 provides speed, torque, and straightening capacity needed for light gauge coil metal-stamping. Machines are typically matched with ServoMaster Series 1 and 2 servo roll feeds and 2,500 to 20,000 lb capacity coil reels. They feature oversize Crodon coated pinch rolls, 7 independent straightening rolls, cluster-gear drive drivetrain, and AC-variable speed-drive technology.

Eastlex Machine Corp.
Lexington, KY 40509
Feb 22, 2002 Electrically powered, adjustable Model 28000 permanently marks without jarring or double stamping. It requires no operator effort to stamp, leaving both hands free to handle parts. Model 28000 may also be used to straighten machined or heat-treated parts. Optional straightening tool kit is available. Other options include holders, parts counters, and adjustable pedestal stands.

Double E Co., Inc.
West Bridgewater, MA 02379
Jan 17, 2002 Portable pneumatic Double E restores damaged fiber or metal-capped cores to original roundness. It has all-steel frame, hermetically sealed nylon-reinforced elastomer bellows impervious to most contaminants, pressure relief valve, and 3-way, 2-position actuating slide valve. Available for 3 and 6 in. cores, it is easy to use and only 1 operator is necessary. Unit is air operated, eliminating hydraulic fluid leaks.

ORII Corp. Of America
Erlanger, KY 41018
Nov 08, 2001 LCC-HF2 Straightener/Feeder, equipped with HM-type Computer Control System (CCS), handles metals from 1.97 in. to 39.37 in. wide and up to 0.18 in. thick. It accepts maximum coil weights up to 10 tons and maximum coil O.D.s of 60 in. Features include no-loop detector, photo sensor loop control, pilot roll, handwheel adjustment, end-of-stock detector, and pneumatic or hydraulic expansion systems.