Crystek Corporation
Ft. Myers, FL 33913
Jan 06, 2009 Crystek Pocket Passive Doubler (CPPD) series comes in SMA housing for inline assembly and operation in test equipment as well as general lab use. Model CPPD-0.85-2 accepts 0.85-2.0 GHz input frequency and multiplies by factor of 2 to achieve 1.7-4.0 GHz output frequencies. Likewise, input for CPPD-2-4 is 2.0-4.0 GHz and output is 4.0-8.0 GHz. Input drive level is +10 to +20 dBm, with typ conversion loss of 15 dB (CPPD-0.85-2.0) and 13 dB (CPPD-2-4).

3M Co., Electronic Products Div.
Austin, TX 78726
Jan 06, 2009 Suited for smart cards, e-passports, ID cards, banking/credit cards, and transportation cards, 3M ToughShield Protective Sleeves block radio frequencies to help eleiminate data theft or skimming. Inner copper-coated conductive polyester layer is bonded to outside layer of 3M TufQUIN inorganic hybrid insulating paper. This material is tear- and water-resistant and also withstands wear. After 2,000 cycles of abrasion resistance testing, it retains 99% of its shielding effectiveness.

Newer Technology, Inc
Woodstock, IL 60098
Dec 12, 2008 Voyager Quad Interface SATA I/II Hard Drive Docking Station turns any 2.5 or 3.5 in. SATA I/II hard drive up to 2.0 TB into fully bootable and hot-swappable external drive solution. Enabling read/write data speeds of up to 3.0 Gbps, it supports FireWire® 800/400, USB 2.0, and eSATA interfaces. Device measures 5.28 x 3.70 x 2.68 in. and weighs 1.35 lb (without drive) and includes 2-color status LED and pushbutton drive eject. Unit is compatible with Mac and PC.

Avalue Technology Inc.
Chung Ho City, Taipei   Taiwan
Dec 09, 2008 Powered by Intel® dual-core GM45 technology, Model ACP-GM45 supports FSB up to 1,066 MHz and 2 sets of 4 GB DDR2/DDR3 memory controllers. Security chipset helps defend against software-based attacks, while EEPROM 64 KB read-only encoding function and hardware random number generator protects data from being false or stolen. Board provides JAMMA interface, dual independent display support, 2 sets of RTCs, and 32-bit digital I/O interface.

Time Mark Corp.
Tulsa, OK 74116 2019
Nov 25, 2008 Offered as MCU-based sensing circuit, Model 16-1 protects equipment from over, under, over/under voltage, and rapid cycling conditions. Trip and restart delays are respectively adjustable from 0-30 and 0-300 sec or can be disabled. Input voltages for alternating low range and high range versions is 12-30 Vac/Vdc and 30-277 Vac, respectively, and response time is 48 msec (less than 100 mS with relay flight time). Surface-mount and 8-pin socket versions are available.

GDA Technologies, Inc
San Jose,, CA 95131
Nov 11, 2008 Bali Reference Board incorporates MPC5121e processor, based on scalable e300 Power Architecture(TM) processor core, which includes MBX Lite 2D/3D graphics engine and PowerVR geometry processing acceleration. Board also includes 512 Mb DDR-II SDRAM memory at 400 MHz, up to 128 Mb NOR Flash memory, up to 2 Gb of NAND Flash memory, and 80 Gb 1.8 in. HDD with PATA interface. Its dual radio module conforms to IEEE 802.11b/g wireless LAN and Bluetooth v2.0 with Enhanced Data Rate.

Bosch Rexroth Corporation
Hoffman Estates, IL 60192-3707
Oct 31, 2008 With 2.25 in. stroke and duty cycle time of 1 cycle/sec, Wafer Lift Subassembly helps toolmakers simplify their automation requirements. It utilizes servo drive and motor, size 15 Ball Rail® with precision 12 mm dia ball screw in T5 accuracy class. Unit comes tested and ready to install as single component and provides smooth, vibration-free motion and is rated for more than 7 million cycles. Measuring 24 in. high, unit is also exposed to vacuum load of 108 lb.

Lord Corporation
Cary, NC 27511
Sep 29, 2008 Gelease(TM) material, formulated with some cross-linking, has strength to stay in place and does not pump out. Movement is minimized as material has some cohesive strength, but is still soft so it can absorb movement of surfaces caused by thermal coefficient of expansion differences of assembled parts and maintain integrity of thermal path. Gelease was designed for syringe dispensing or stencil printing.

Fujitsu Computer Products of America, Inc.
Tokyo 105-7123  Japan
Sep 24, 2008 Using rare-earth magnet technology, Mag EraSURE ME-P3 Version 2 completely erases sensitive data embedded several layers down that might not have been deleted using conventional methods on hard disk drives, tapes, and other storage devices. Unit eliminates need to remove drive from canister before degaussing it, and enables users to comply with HIPAA, SOX, PCI, and DSS and regulations. Mag EraSURE ME-P3 also meets Department of Defense requirements for destroying magnetically recorded data.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Sep 24, 2008 Threaded for panel mounting with coupling nut, PCB Sealed Industrial Ethernet Connector uses through-hole mounting with 2 plastic legs, providing additional mechanical retention before and after soldering. Industrial, rugged, and modular RJ-45 connector includes IP67 sealing and quick-connect bayonet coupling that meets IEC 61076-3-106 Variant 1 specifications. Offered in polarized housing that can prevent mis-mating, it can withstand harsh environments.

North Atlantic Industries, Inc.
Bohemia, NY 11716
Aug 20, 2008 Capable of accommodating 3 independent modules, Model 76C2 half-slot, multi-function PCI card offers ARINC 429/575, RS-422/485/232, D/S Converter, and Reference Generator functions along with A/D, D/A, S/D, LVDT/RVDT, and I/O functionalities. Each function is programmable at channel level. Available in both commercial temperature range and severe environment, industrial temperature range, unit has operating temperature ranges of -40°C to +85°C and 0°C to +70°C.

Actel Corp.
Mountain View, CA 94043 4655
Aug 20, 2008 Verified to operate across -55 to +125°C range, ProASIC®3 and ProASIC®3EL range in density from 600,000 to 3 million system gates and are immune to neutron-induced configuration upsets (firm errors). Both 1.2-1.5 V military-qualified devices deliver 64-bit 66 MHz PCI performance and offer on-chip user flash memory. Flash Freeze mode allows switching within 1 µs between active and static states, and secure in-system programming support enables field upgrades.

Mistral Solutions
Bangalore   India
Aug 19, 2008 Designed for analyzing flight parameters, Pulse Code Modulation (PCM) Telemetry Encoder is comprised of DAQ, conversion, frame processing FPGA, and PCM output sections. Fully configurable onboard system, based on AMCC PPC405, supports multiplexed sampling of 64 analog channels and comes in 140 x 110 x 115 mm MIL grade aluminum enclosure. MIL-STD-1553 Monitor/Remote Terminal offers dual-redundant bus interface to monitor and capture on-board 1553 bus transactions.

Tecate Industries
Poway, CA 92064
Jul 28, 2008 Offered to facilitate packaging and integration of Maxwell Technologies' MC Power Series Boostcap® ultracapacitors, PowerBurst® MCI Integration Kits allow design engineers to create test modules for proof of concept testing. Interlocking end cap system enables modules to be assembled using snap-together feature. Provided with all hardware and instructions required to build 2-, 4-, or 6-cell modules, kits include PCBs with voltage management circuitry, buss bars, washers, and retaining nuts.

Southco
Concordville, PA 19331 0116
Jul 22, 2008 Compatible with all cPCI board sizes used in telecom, industrial, and military embedded computing applications, RoHS-compliant inject/eject mechanisms for circuit boards feature handle optimized for grip along with release action to facilitate use. Inject/eject handles engage with mounting rail to ensure positive connection as cPCI board is inserted into backplane connector. Operating button on each ejector is accessible and protected against accidental actuation.

Asus Computer, Inc.
Newark, CA 94560
Jul 22, 2008 While bundled with EN8600GT/HTDP/256M graphics card, ROG (Republic of Gamer) XG Station comes equipped with PCIe interface, 4 USB 2.0 ports, and Dolby A/V Technology. Station has dedicated 3D graphics engine, allowing users to connect it to any LCD monitor, connect to notebook via Express Card connector, and then perform graphics-intensive applications. Real-time overclocking can be controlled with ergonomic knob, and LED screen displays critical system status.

Electro Standards Laboratories
Cranston, RI 02921 3403
Jul 18, 2008 Model 6765 is high speed, 4-channel Logic-to-Fiber Interface Converter that translates 4 input/output logic pairs into 4 fiber pairs, resulting in total of 8 fiber optic connections. It features user selectable fiber light ON polarity, ST fiber connectors, and logic test points for signal monitoring. Powered from 5 Vdc, circuit board is suited for embedded applications.

Catalyst Semiconductor
Sunnyvale, CA 94089
Jul 14, 2008 Integrating 5 channels into one 8-lead MSOP, CAT885 gives designers high reset threshold accuracy (±2%) and minimal power consumption for monitoring power supply (Vcc) status of MPU, MCU, ASIC, or other system processor. It features open-drain output, active-low function with manual reset to perform system reset, and monitoring functions for range of electronic products. Two voltage detectors are factory-set, and remaining 3 voltage monitors are adjustable.

Silicon Laboratories
Austin, TX 78727
Jun 26, 2008 Capable of generating any output frequency from crystal/reference clock input with 0.3 picosec jitter generation, Model Si5319 Any-Rate Precision Clock is suited for high performance timing applications. It accepts any frequency from 2 kHz to 710 MHz and generates any frequency from 2 kHz to 945 MHz and select frequencies to 1.4 GHz. Supporting free-run mode of operation, IC is available in 6 x 6 mm, 36-lead QFN package and 3 speed grades based on maximum output clock frequency.

Keystone Electronics Corp.
Astoria, NY 11105
Jun 09, 2008 Available with choice of 10 colors, Miniature, Compact, and Multi-Purpose Test Points facilitate identification in high-density, .062-.093 thick PCBs and also serve to keep on-board terminals perpendicular to PCB. Miniature types are manufactured from .010 in. phosphor bronze with silver plating and mount in single .040 in. dia PCB hole, while Compact and Multi-Purpose types employ same materials sized at .015 in. dia and mount in .063 in. dia PCB hole.