ATC-Diversified Electronics
Lancaster, PA 17601
Jul 22, 2008 DIN rail mounted DLA Series 3-Phase Monitors protect equipment from adverse conditions such as phase loss (single phasing), undervoltage (brown-outs), and phase reversal (improper sequence). DTA Series Multifunction Time Delay Relays combine multiple timing functions and ranges into one DIN rail-mount package. Both are suited for users and OEMs in water, food, and automation industries.

Leadis Technology, Inc.
Sunnyvale, CA 94085
Jul 21, 2008 Optimized for operation down to 1.8 V, LDS6000 and LDS6020 consume less than 200 µW in full power mode. Former features 15 touch sensor inputs, while latter offers up to 13 and integrated keypad LED driver functionality. Both support various touch input types - buttons, sliders, scroll wheels - and provide update rates of 2 ms per sensor input with on-chip automatic calibration logic. SPI-compatible and I²C-compatible interfaces are supported via GPIO and interrupt output.

Power Distribution, Inc.
Richmond, VA 23223
Jul 21, 2008 Designed to fit on top of any manufacturer's power distribution unit, J Comm(TM) Retrofit for PDUs integrates branch circuit monitoring system and split core or solid core CT strips for up to 168 breakers. J Comm(TM) Retrofit for remote power panels fits on top of any manufacturer's power panel and integrates BCMS product and split or solid core CT strips for up to 168 breakers. J Comm(TM) Under floor Enclosure can be used for any installation including equipment already in field.

Electro Standards Laboratories
Cranston, RI 02921 3403
Jul 18, 2008 QuickSwitch Model 6212 ST Duplex 10-Position Fiber Optic Switch allows users to switch 1 common ST duplex port to any one of 10 ST duplex multimode ports using either local front panel pushbutton access or remote GUI or Telnet commands. Using mirror technology, IP addressable network switch can support gigabyte data rate while maintaining all fiber optic signals in fiber optic light transmission media. Switch maintains its position and continues to pass data in event of power failure.

Littelfuse, Inc.
Des Plaines, IL 60016
Jul 18, 2008 Targeting manufacturers of Japanese white goods, 388 Series of METI B-compliant fuses are designed to provide overall protection for both primary (main power input) and secondary (individual component) protection. Available in both cartridge and pigtailed versions as well as with color-banding and with special/customized formed leads, RoHS-compliant and lead-free fuses feature interrupting capacity of 100 A at 250 Vac, with ratings from 1-30 A.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Jul 17, 2008 Series LDT monitors shaft seal and stator temp of submersible pump to help prevent failure. When leak is detected, output relay energizes, and LED indicator illuminates. Relay automatically resets when seal failure condition clears. NC temperature switch, mounted on stator, detects over-temperature, and bi-stable relay retains its position during power loss and latches on until remote reset button is pressed. Leak sensitivity is adjustable from 1 k to 35 kW.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Jul 17, 2008 Single-channel Series SLD monitors shaft seal of submersible pump to detect leak before pump failure. Leak is detected by sensing status of float or conductivity switch installed in seal cavity. When resistance drops below set sensitivity, output relay energizes and LED indicator illuminates. Utilizing 120 Vac control voltage, relays offer sensitivities of 470 W fixed, 470 to 10 kW adjustable, and 4.7 k to 100 kW adjustable.

Phaseda LLC
Beaverton, OR 97005
Jul 17, 2008 Series KND2 snaps into industry standard panel cut-out size 0.862 x 1.169 in. and is equipped with 0.250 in. tab terminals for push-on assembly. Internal design allows protection against dust and water up to IP55 without external PVC cap. Functions include DPST On.Off, momentary (On).Off; DPDT On.On, On.Off.On, (On) ON, and two sides momentary. Switch has ac/dc rating and is UL approved at 20 A 125 Vac and 20 A 36 Vdc.

EAO Switch Corp.
Milford, CT 06460 3670
Jul 16, 2008 Offered as pushbuttons or indicators in 22.5 and 30 mm round sizes, either in flush or raised mounting styles, Series 04 and 14 stainless steel switches provide protection against impact, vandalism, dirty environments, and harsh operation. Illuminated with high-intensity LEDs, pushbutton can be fitted with SS lens, protective front ring, and bezels, while flush-mounting option restricts possibility of dirt accumulation. Series 14 can be sealed to IP67 against oil and dirt ingress.

United Electric Controls
Watertown, MA 02472
Jul 16, 2008 Designed for high-pressure oil and gas drilling and safety shutdown markets, Models P4 and P9 mechanical pressure switches feature up to 12,500 psig adjustable set point range. Snap-action Belleville spring assembly provides vibration resistance and set-point stability, and choice of ¼ in. NPT (female), ¼ or 3/8 in. medium or high-pressure (male or female) autoclave connections are also available. Units are Class I, Div. 1 rated, UL approved, and ATEX certified.

E-Switch Inc.
Brooklyn Park, MN 55428 1514
Jul 15, 2008 Model TL3315 surface mount tactile switch has electrical life of 200,000-1,000,000 cycles depending on operating force. Unit features 100, 160, and 250 gf operating force, contact rating of 50 mA at 15 Vdc, contact resistance of 200 mW max (initial), insulation resistance of 50 MW (min at 100 Vdc), and dielectric strength of 250 Vac rms. With -20 to +70°C operating temperature range, switch suits consumer electronics, audio/visual, and medical applications.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Jul 14, 2008 Suited for applications where output is regulated current, TPS40211 drives high-power LEDs when input voltage is less than voltage to turn on LEDs. LED driver features 4.5-52 V wide-input voltage, programmable closed soft start, over current protection with automatic retry, and programmable oscillator frequency. Designed for boost, flyback, SEPIC and LED driver topologies, it has fixed frequency current mode control that offers improved transient response and simplified loop compensation.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Jul 14, 2008 With 16-bit (65,536 steps) grayscale control with spectrum PWM, TLC5943 16-channel, 50 mA constant-current sink LED driver improves image quality and reduces flicker noise in monochrome, multicolor, and full-color LED displays, as well as LED signboards and display backlighting. It features 7-bit (128 steps) global brightness control for all channels with sink current, 30 MHz data transfer rate, 3.0-5.5 V VCC, and ±1.5% channel-to-channel and ±3% device-to-device constant current accuracy.

International Rectifier Corp.
El Segundo, CA 90245
Jul 14, 2008 Available in 8-lead SOIC, IRS260xD Series power MOSFET and IGBT drivers are designed for sinusoidal and trapezoidal motor control. Model IRS2607D high- and low-side driver features outputs in phase with inputs. With 540 nsec internal dead-time, IRS2608D half-bridge driver offers high-side output in phase with HIN input and low-side output out of phase with LIN input, while IRS2609D features high-side output in phase with IN input and shut down input to turn off both channels.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.
Maple Grove, MN 55369
Jul 10, 2008 Available with positions ranging from 2-12, KJ Series DIP Switch has electrical ratings of 25 mA at 24 Vdc for switch and 100 mA at 24 Vdc for carry. Featuring electrical life of 2,000 typical with contact resistance of less than 25 mW initial, unit has actuation force of 600 gF max, actuator travel of 0.90 mm, dielectric strength of 500 Vrms min with insulation resistance of greater than 100 MW min, extended actuator height of 0.6 mm, and operating/storage temperature of -40 to 85°C.

Catalyst Semiconductor
Sunnyvale, CA 94089
Jul 10, 2008 Available in 4 x 4 mm, 24-lead SOIC, TSSOP, and 24-pad TQFN package, CAT9552 I2C/SMBus drives up to 16 LEDs in programmable flashing or on/off modes. LED driver/blinker is designed with internal oscillator and 2 programmable on/off or blink rate timers, adjustable from 0.02-5.8 sec. Featuring I/Os that can be used as general purpose I/Os, it is suited for advertising point-of-sale signage with flashing LEDs, and any type of consumer or industrial equipment with on/off LED indicators.

Mindspeed Technologies Inc.
Newport Beach, CA 92663
Jul 10, 2008 With quad-channel, multi-rate, and SMPTE and DVB-ASI compliant video reclocker, M21260 4x4 3.2 Gbps crosspoint switch comes with fully non-blocking architecture and broadcast/multicast functionality. It can perform either 1:4 fanout, 4:1 selector, or 4x4 crosspoint functions in secondary switching applications for large scalable routing switcher matrices and distribution amplifiers or input selectors. Model M21262 integrates 4:1 selector device with multi-rate video reclocking.

Linear Technology Corp.
Milpitas, CA 95035-7417
Jul 10, 2008 Series LT3592 step-down dc/dc converter features internal 900 mA switch to drive up to six 500 mA white LED in single string from 36 V input for industrial and LED signage applications. It can also drive two 500 mA LEDs from 12 V lead acid battery input for automotive applications. Series connection of LEDs provides identical currents, resulting in uniform brightness and eliminating the need for ballast resistors. Switching frequency is adjustable from 400 kHz to 2.2 MHz via single resistor.

Linear Technology Corp.
Milpitas, CA 95035-7417
Jul 10, 2008 Series LTC4446 can drive upper and lower N-Channel power MOSFETs in 2-transistor forward converter. It can source up to 2.5 A with 1.2 W pull-down impedance for driving top MOSFET and 3 A with 0.55 W for synchronous MOSFET. Unit can also drive multiple MOSFETs in parallel for higher current applications, and features rise/fall time of 8/5 nsec top MOSFET and rise/fall time of 6/3 nsec bottom MOSFET when driving 1,000 pF load.

Advanced Analogic Technologies Inc.
Sunnyvale, CA 94085
Jul 09, 2008 Integrating up to 7 LED/Flash drivers with 3 low dropout linear regulators, Series AAT2860 is I(2)C-based Lighting Management Unit (LMU) that features -40 to +85°C temperature range, tri-mode charge pump, and 2.7-5.5 V input voltage range. Model AAT2860-1 is configured into 7 LED drivers for main display or 4 for main display and 3 for sub-display, while AAT2860-2 offers 6 LED drivers for main display and 1 flash driver or 4 for main display, 2 for sub display, and 1 flash driver.