Littelfuse, Inc.
Des Plaines, IL 60016
Nov 23, 2009 Housed in SOT953 package that measures 1.0 x 1.0 x 0.5 mm, 4-channel SP1004 Series provides ESD protection at maximum level of IEC61000-4-2 international standard (Level 4, ±8 kV contact discharge). Unit has 6 V reverse standoff voltage with low leakage of less than 0.1 µA at 5 V. It is suited for cell phones, smart phones, PDAs, MP3/PMP players, and portable navigation devices. With total capacitance of 5 pF, device is also usable for high-speed data lines and low-speed audio lines.

Littelfuse, Inc.
C c hicago, IL 60016
Nov 20, 2009 Low pass, C-R-C filters in SP6001 Series feature line capacitance of 24 pF with cut-off frequency of approximately 115 MHz, while SP6002 Series filters have line capacitance of 30 pF with cut-off frequency of about 100 MHz. Each series includes 4- and 6-channel versions that provide attenuation of less than or equal to -30 dB from 800-3,000 MHz. Silicon protection arrays meet IEC61000-4-2 standard and have 6 V reverse standoff voltage with leakage under 1 µA.

AVX Corp.
Myrtle Beach, SC 29578
Nov 18, 2009 Housed in 0402 case, 0.5 pF AntennaGuard SPV Series MLV provides 1 nS response time to ESD strikes and can withstand 100 successive strikes at 8 kV. Bi-directional transient voltage suppressor delivers 0.47 pF capacitance at 15 V rating, providing one-chip solution for protecting high-speed digital interface, HDMI, analog sensor, Flex Ray, GPS antenna, and RF amplifier circuit applications against ESD events.

Semtech Corp.
Newbury Park, CA 91320
Nov 13, 2009 Manufactured on sub 65 nm technology and supplied in 1.0 x 0.6 x 0.4 mm package, uClamp2501T and uClamp2511T are 2.5 V single-line MicroClamp® transient voltage suppression (TVS) devices targeted at multimedia smart phones. They feature 10 nA leakage current and 2.5 V operating voltage. While unidirectional uClamp2501T is rated at 30pF, bidirectional uClamp2511T offers capacitance of 10pF max. Both are compliant to RoHS and WEEE standards.

Para Systems, Inc.
Carrollton, TX 75007
Nov 06, 2009 Incorporating solid-state surge protection technology with response time of 2-5 ns, Minuteman LineGuard(TM) Suppressors protect analog and digital surveillance cameras, DVRs, and network peripherals, including devices using Power over Ethernet. Units clamp surge to ground and automatically reset after low-voltage surge occurs. If catastrophic surge such as lightning does hit data line, LineGuard products provide fail-safe protection.

Murrelektronik, Inc.
Duluth, GA 30096
Nov 06, 2009 Murrelektronik Suppressors help protect PLC outputs in fieldbus sytems from premature failure. They are available in wide range of casing types with several mounting options to allow fitting to motor terminal boxes, control cabinets, DIN rails, and underside of contactors. EMC complaint installation allows plants to achieve noise free, failure free operation.

ON Semiconductor, LLC
Phoenix, AZ 85008
Nov 06, 2009 Ultra-low capacitance NP-MC series protect sensitive electronic equipment from transient overvoltage conditions. Available with full range of industry-standard voltage levels, Pb-free series is designed for use with DSLAM, FTTx, Ethernet, POE, and VoIP systems. Packed in 2.6 x 4.3 mm SMB package, products provide protection with minimal signal distortion in high-speed xDSL, T1/E1 and other broadband data transmission equipment and comply with various industry regulations.

NexTek, Inc.
Westford, MA 01886
Nov 04, 2009 Built to IP68 standards, SurgeGuard(TM) K-Series protects RF transmission lines rated up to 50,000 W with surge capability to 125,000 A. It addresses demands of mission-critical RF applications, including HF, VHF, and UHF frequency ranges from 0 (DC) to 1,000 MHz. Based on multiple gas discharge tube design with serviceable replacement elements, arrestor measures 119 x 45 mm, has 7-16 female to 7-16 female connectors, and delivers 50 kW max RF power at max through-current of 30 A.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Oct 27, 2009 Supplied in eSMP(TM) TO-277A package with 1.1 mm profile, 1,500 W TPC Series transient voltage suppressor (TVS) protects sensitive automotive equipment from voltage transients induced by inductive load switching and ESD. They provide breakdown voltages from 6.8-43 V, peak forward surge current of 200 A, and clamping capability from 10.5-61.9 V. RoHS-compliant and halogen-free PAR® construction lends to high-temperature (-65 to +185°C) stability in high-reliability conditions.

Tripp Lite
Chicago, IL 60609
Oct 27, 2009 In addition to 3 standard outlets that accommodate one transformer plug each, TRAVELER3USB features 2 USB charging ports. Nominal functionality protects all connected equipment from electric spikes and surges, and USB ports allow USB-enabled devices to be reenergized. Right-angle plug turns one outlet into 3 without blocking access to neighboring outlets, and concealable power cord facilitates storage. One mini USB-to-USB cable is included.

Tripp Lite
Chicago, IL 60609
Oct 23, 2009 Incorporating Isobar® surge suppression and noise isolation technology in 1U device, Model AV3500PC protects connected components on AC, coaxial, and telephone/modem lines. Input voltage LCD meter with dimmer control displays incoming utility power, while diagnostic LEDs report operational conditions. With 5,700 joule protection rating, AV3500PC is optimized for flat panel digital displays, DVRs, A/V processors, amplifiers, Blu-ray DVD/CD players, and subwoofers.

Littelfuse, Inc.
Des Plaines, IL 60016
Oct 15, 2009 Housed in SOT23-6 package, SP3050 Series suppresses large surge/lightning transients per IEC61000-4-5. Four-channel diode array features integrated zener diode and is suitable for secondary or tertiary protection in 10/100/1000 Ethernet applications. It is also usable in USB 2.0 applications where enhanced level of ESD protection is required. Compliant with RoHS, unit has 6 V reverse standoff voltage with low leakage of ≤1 µA and dynamic resistance under 0.7 W.

AVX Corp.
Myrtle Beach, SC 29578
Oct 12, 2009 Designed to clamp transients and filter EMI, 0201 TransGuard® Series provides protection to sensitive circuits from over-voltage conditions caused by ESD, lightning, NEMP, and inductive switching. Device can also withstand up to 1,000 strikes at 8 kV contact with sub 1 nS response time for ESD events and leakage current of less than 5 µA at rated voltage. With 5.6 V rating, miniature bi-directional transient voltage suppressor provides minimal signal distortion.

Belkin Components
Compton, CA 90220
Oct 07, 2009 With Conserve Surge with Timer, employees can plug office electronics into 1 of 6 Auto Off outlets, while Always On outlets keep PCs and other critical devices powered on at all times. Users can activate 6 switched outlets with single press of on/off button, allowing automatic timer to eliminate power to those outlets after 11 hours. When employees leave for the day, switched outlets turn off, eliminating power consumption that would normally occur throughout evening and weekends.

AVX Corp.
Myrtle Beach, SC 29578
Aug 31, 2009 Including 15 and 33 pF capacitance devices with 5.6 V rating in 0201 case size, miniature Transguard 0201 bi-directional transient voltage suppressor offers designers ability to clamp transients and filter EMI in one compact device. It features sub 1 nsec response time to ESD strike, has leakage current of less than 5 µA at rated voltage, and is able to withstand 1,000 strikes at 8 kV of contact.

Tripp Lite
Chicago, IL 60609
Aug 31, 2009 Incorporating Isobar® surge suppression and noise isolation technology in 1U with full equipment depth, model AV3500PC offers 3-line high-definition 2.2 GHz gold coaxial and single-line telco surge protection with splitter. It features EMI/RFI line noise filtering and isolated filter banks, input voltage LCD meter with dimmer control, and diagnostic LEDs for operational conditions. System is optimized for professional A/V installations.

Phoenix Contact
Harrisburg, PA 17111 0100
Aug 27, 2009 Available in IP65 installation housing, pre-assembled surge protection sets are designed for solar photovoltaic industry. Surge arresters feature temperature-monitored, high-capacity varistors with optical fault warning and dynamic disconnect device. PV-SET DC and PV-SET Multistring offer surge protection on PV generator side only, while PV-SET DC/AC protects all power lines in system, including both PV generator side and power supply.

L-Com, Inc.
North Andover, MA 01845
Aug 18, 2009 Designed to protect computer's USB ports from surges and spikes from attached devices, AL-ECF504-AB can be mounted in ECF style panels, and can also be used in custom cut wall plates and panels. Low capacitance diodes protect data lines and ensure USB 2.0 speeds, while protection device clamps power lines to safe levels. Unit is suited for protecting PC from USB connected devices including USB hubs, WiFi USB client adapters, and USB enabled surveillance cameras.

Maxim Integrated Products
Sunnyvale, CA 94086
Aug 14, 2009 Models MAX14529E and MAX14530E provide high-current USB charger detection and ±15 kV ESD protection for portable devices. Offered in 1.5 x 2 mm, 1-bump wafer-level package, they include MOSFET to protect low-voltage systems against voltage faults up to 28 V. Units operate over -40 to +85°C temperature range. Devices are suited for cell phones, media players, PDAs, and other space-constrained applications.

L-Com, Inc.
North Andover, MA 01845
Aug 05, 2009 Featuring four Category 5E/6 Ethernet surge protector modules, 1U 19 in. Model RMSP-CAT6-4 employs ultra-low capacitance semiconductors ensuring optimal frequency response and return loss for 4 data pairs on each line under surge protection. Replaceable modules allow field repair in event of catastrophic surge event. Unit is 802.3af PoE compatible for normal or reverse polarity systems and can be used with 10/100/1000 attached devices such as switches, routers, access points, and IP phones.