Phoenix Contact    Harrisburg, PA 17111 0100
Mar 05, 2012 Available for 120/240 Vac applications, Quint UPS-IQ automatically detects input voltage and uses intelligent battery management to provide advanced diagnostics. UPS can start independent of AC input, allowing users to power up IPC or controller during blackout to simplify system diagnostics. Functionality lets users see data concerning power supply's voltage condition, UPS parameters, and battery health at any time.

Baumer Ltd.    Southington, CT 06489 1534
Mar 05, 2012 Able to detect media levels in tanks, vessels, and pipes, LBFS level switch features sensitivity over measuring range for dielectric constants from 1.5 to 100+ that enables limit detection with all types of powders, granulates, and liquids. Response time of 0.2 sec promotes accelerated fill level detection as well as fill level accuracy and compliance. Featuring sensor head resistant to media adhesion, product is insensitive to flow, turbulence, bubbles or foaming, and suspended solids.

L-Com, Inc.    North Andover, MA 01845
Mar 02, 2012 Single stage AC/DC control line lightning and surge protectors products protect 8 individual single-ended AC or DC control lines using grounding lugs to provide tie points for earth ground. Weather-resistant models are available for 12, 24, and 48 Vac and 5 Vdc lines and feature removable screw terminal strips. AC protectors feature metal oxide varistors, while DC protectors feature uni-polar transient voltage suppression diodes rated at 1,500 W.

Phihong USA    Fremont, CA 94539
Mar 02, 2012 Suited for indoor/outdoor lighting applications, 50 W Model PDA050W-450G is equipped with 4 constant current outputs of 450 mA at nominal output voltage of 24.5 Vdc. With AC input range of 90-304 Vac, driver can be operated at standard North American mains voltages of 120 or 277 Vac for residential, commercial, and industrial applications. Water-resistant and fully potted with IP65 rating, driver has minimum average efficiency ratings from 82% at 120 Vac to over 84% at 277 Vac input.

Bridgeport Fittings, Inc.    Stratford, CT 06497
Mar 02, 2012 Made of zinc die-cast, Whipper-Snap® Snap-In U-Shaped Strap Duplex Connector is designed for connecting .42-.61 in. cable or 3/8 in. flexible metal conduit to box or enclosure. Model SG3838ASP is suitable for maintaining grounding continuity when installed in accordance with NEC patented Whipper-Snap design.

Nord Gear    Brampton, ON L6T4A1
Mar 02, 2012 Available for motor-mounting or with wall mounting kit, SK 200E series size 4 self-cooling inverter comes in IP55-rated housing and offers functions such as sensorless current vector control, integrated brake chopper, control module for electromagnetic brake, and safety function (Safe Torque Off) as standard. User programming and operation is accomplished via choice of control boxes or NORDCON software, and energy-saving function kicks in during partial load operation.

Polatis, Inc.    Billerica, MA 01821
Mar 02, 2012 As fully non-blocking, all-optical, single-mode fiber cross-connect for up to 192 x 192 fiber ports, Series 6000 Optical Matrix Switch exhibits less than 1 dB typ optical loss. DirectLight® beam-stearing optical switch technology allows optical connections to be established with or without light on fiber; supports transparent, protocol-agnostic connections; and can switch bi-directional and transient signals. Modular design allows symmetric and asymmetric matrix configurations.

Phoenix Products Co., Inc.    Milwaukee, WI 53224
Mar 02, 2012 Comprising 300 W Hi and 150 W Lo models respectively capable of producing up to 25,000 and 12,500 lm, instant-on ModCom(TM) Series provides years of service with minimal maintenance even in harsh environments. LEDs are rated for 50,000 hr, and conformal coated circuit boards, fully-potted premium-brand drivers, and stranded wires protect against water ingress and vibration damage. Optical packages include narrow, 10°, 24°, or 50° beam angles, and fixture will rotate 360° on its aiming axis.

Xuron Corp.    Saco, ME 04072 1840
Mar 01, 2012 Available in left- and right-hand versions with non-slip Xuro-Rubber(TM) grips, Xuron 8500 BioShear(TM) Flush Cutter employs bypass cutting, which produces clean, square cut by using shear action. Ergonomic design helps keep user's knuckles in straight line to maintain comfort while cutting. Capable of cutting soft wire up to 18 AWG and plastics, tool is suited for electronics assembly, hobbies, and crafts.

Summit Microelectronics, Inc.    Sunnyvale, CA 94085
Mar 01, 2012 Dual-/single-output integrated DC-DC buck regulators SMB206A and SMB210A have serial digital interface and on-board non-volatile memory that enables configuration during development and re-programming in system by host software. ICs can also be programmed by fixed resistors and are available as standard products with fixed voltages. Respectively, SMB206A and SMB210A supply up dual 3 A + 3 A or single 6 A output currents. Switching frequency is programmable.

Appleton    Rosemont, IL 60018
Mar 01, 2012 Rated for use in adverse and hazardous locations (Class I, Div 2), Areamaster(TM) LED has universal design for flood or high-bay mounting and is suitable for replacing HID, fluorescent, and incandescent fixtures. Corrosion-resistant product, rated at 127 W, measuring 15 in.² and delivers 13,000+ lm of cool white light (5650K) in 131° x 134° (H x V) beam spread with CRI of 70. Featuring 60,000+ hr service life, luminaire does not require external optics and delivers efficiencies up to 80%.

Pass & Seymour/Legrand    Syracuse, NY 13221
Mar 01, 2012 Designed to create optimal lighting level for any activity, Harmony(TM) CFL/LED Dimmer has internal, user-adjustable dial to accommodate variety of CFL and LED bulbs and lamps. Dimmer can operate with single-pole and 3-way circuit, has 450 W rating, and does not require any derating in multi-gang applications. Packaged with interchangeable ivory, white, and light almond face colors, product combines On/Off Decorator switch with separate slider for dimming control.

Renco Electronics, Inc.    Rockledge, FL 32955
Mar 01, 2012 Featuring encapsulated design and 3,750 V Hi-pot, Model RL-9740 is suited for use in industrial monitoring controls and switch mode power supply applications. Thru-Hole Current Transformer meets all IEC950 insulation and VDE requirements. Housed in 19 mm high package with 4 PCB pins, device operates from -40 to +130°C.

ABB Ltd.    Zurich CH-8050  Switzerland
Feb 29, 2012 Equipped with RER620 Intelligent Electronic Device, 3-phase GridShield® features single-phase tripping capabilities. Unit has modular pole assembly and can function as recloser, sectionalizer, or automated load break switch. Offering integrated loop control, RER620 comes standard with fully implemented IEC 61850 and GOOSE messaging features, as well as inrush detection for use in distributed generation applications, and high impedance fault detection for downed conductor detection.

Larson Electronics, LLC    Kemp, TX 75143
Feb 29, 2012 Constructed with heavy gauge steel quad-pod, Model WALQP-1X150LED is equipped with 150 W LED light head that produces 14,790 lumens and covers area up to 18,000 ft². Lamp is made of aluminum with scratch- and impact-resistant LEXAN lens. Adjustable in 2 in. increments, tower mast can be raised to 10 ft in height and lowered to 7 ft. For transport, entire tower assembly can be collapsed, quad-pod legs can be folded, and LED light head assembly can be removed without tools.

W.A.C. Lighting Company    Garden City, NY 11530
Feb 29, 2012 Brittany features layers of classic Italian opaline glass, creating effect of blossoming, opalescent flower. Producing hues of amber, gold, and milky blue when illuminated, fixture utilizes LEDs with 50,000 hr rated life. LEDme® model uses 12 V and 3.4 W with color temperature of 3,000 K and CRI of 80. Brushed nickel, chrome, dark bronze, and platinum hardware finishes as well as low-voltage halogen and line voltage xenon options are available.

Thomas Research Products    Elmhurst, IL 60126
Feb 29, 2012 BSP3-20K series products provide protection from surges up to 20 kA (using industry standard 8/20 µS wave) and are available in models for 277 V and 480 V power. Compact devices feature 3 wire leads for line-ground, line-neutral, and neutral-ground protection. Flame-proof plastic enclosures provide 85°C surface temperature rating. BSP3-20K is designed for 24/7 applications such as big-box retail, warehouses, parking garages, transportation and government facilities.

Belden    Richmond, IN 47375
Feb 29, 2012 Made with Belden DataTuff Ethernet cables, Cat 6 Cord Sets provide industrial-grade connectivity for manufacturing in harsh environments. Units feature RJ45 plugs, are available in shielded and unshielded versions, and are suitable for IP20 or IP67 applications. Providing electrical stability, Bonded-Pair technology affixes individual conductors in each pair to each other along longitudinal axes, ensuring that no gaps between conductors can occur.

Schurter, Inc.    Santa Rosa, CA 95403
Feb 29, 2012 With quick-acting characteristic according to IEC 60127-4, surface-mount UMF 250 provides overcurrent and short circuit protection for electronic systems in primary and secondary circuits. This Universal Modular Fuse carries current ratings up to 10 A at 250 Vac/125 Vdc and provides breaking capacity of up to 200 A at rated voltage. Featuring cURus and VDE approvals, RoHS-compliant product suits applications such as power supplies, medical equipment, and devices for home/industrial use.

FIKE Corporation    Blue Springs, MO 64015 4263
Feb 29, 2012 RPS is 10 A power supply designed for fire alarm, detection, and control solutions. It can be activated by notification appliance circuit from fire panel, optional control modules, or can be used in standalone applications to supply power to auxiliary devices (door holders, panel peripheral devices). Features include 4 output circuits - Class A or B - rated for 3 A maximum, built-in synchronization with different vendor protocols, operation in both generator and follower sync modes, and universal AC input.