CDF Corporation
Plymouth, MA 02360
Sep 19, 2002 Aseptic Packaging line fits tapered, straight wall, plastic, fiber, and steel drums. Suitable for use with filling equipment used in tomato and juice industry, aseptic bags are available in 2 or 3 ply. Offered in LLDPE, MPET, and Nylon, bag line comes with aseptic fills including 1, 2, or 3 in. fitments. Aseptic Bags are suitable for use with fruit puree, apple, liquid egg, tropical fruit, and yogurt ingredients.

Picosecond Pulse Labs, Inc.
Boulder, CO 80301
Sep 03, 2002 Using Non Linear Transmission Line technology, Edge Compressor transforms input signal by compressing leading edge and reducing its risetime. Output rise times are as short as 4 ps. Unit offers edge compression to 70 ps and repetition rates greater than 20 GHz. Sampler features 100 GHz bandwidth, 3 ps aperture, 10 G sample/sec sampling rate, and 1.0 mm connectors.

American Lewa, Inc.
Holliston, MA 01746 1455
Aug 08, 2002 Model EKO Solar-Powered Injection System for oil and gas wells is fully self-contained and features sealless metering pump that can inject corrosion inhibitors at up to 72 gal per day against 3,700 psi. Pump has 2 PTFE diaphragms that isolate process fluid, providing double containment with zero-leakage, run-dry tolerance, and overload protection. It requires less than 160 W of DC power, which is provided by solar panel array, battery pack, and controls.

American Fabric Filter Co.
Wesley Chapel, FL 33543
Jul 03, 2002 Giant receiving bags eliminate dust in Styrofoam manufacturing process. Air is blown into bag through 8 different inlets and is vented out through bag.

SKC, Inc.
Eighty Four, PA 15330 9614
Apr 25, 2002 Microprocessor-based HAZ-DUST EPAM-5000, for environmental and indoor particulate monitoring, combines light-scattering dust monitoring with inline 37 mm filter cassette for concurrent gravimetric samples. It samples particles from 0.1 to 100 micrometers, using adjustable flow rate from 1.0 to 5.0 L/min, and reads particles from 0.001 to 20.0 mg/m3. Interchangeable size-selective sampling heads allow PM 1.0, PM 2.5, or PM 10 monitoring.

Thermo Spectronic
Rochester, NY 14625
Apr 23, 2002 Enhancements to FRENCH(R) Press include startup kits and valves. Start Up Kit and Miniature 20K Start Up Kit both include motor driven Laboratory Press, spare parts kit, and cell filling stand. Valves include Press Flow Valve and Press O-ring Stem Valve, both for Standard 40K pressure cell. Press and pressure cells are used for disintegration of chloroplast materials, blood cells, unicellular organisms, and other biological particles.

Ideal Industries, Inc.
Sycamore, IL 60178
Apr 16, 2002 Camouflage Totes are constructed of rugged, tear-resistant nylon polyester imprinted with leafy camouflage pattern. Totes have zipper closures to prevent tool loss, reinforced bottoms for durability, and removable shoulder straps. Nylon-stitched and rivet reinforced for durability, totes are available in all popular sizes and shapes. BucketBag(TM) Tool Carrier, which fit over rim of standard 5-gallon bucket, is also available with camouflage design.

Omega Engineering, Inc., Omega.com
Stamford, CT 06907 0047
Mar 21, 2002 SWS-201 Stormwater Sampler takes first flush sample in one bottle and time-weighted composite sample in second bottle. It consists of rainproof, lockable carrying enclosure, two 4000 ml polyethylene sample bottles, 2 peristaltic sampling pumps, logic timer/controller, water sensor, and rechargeable, gel-cell battery. Water sensor controls sampler, and triggers sampler based on rainfall or raise in water level in storm drain.

Jiskoot Inc.
Houston, TX 77014
Feb 13, 2002 CPC1 and CPC2 constant pressure sample receivers are designed for receipt, handling, and storage of liquid and gaseous hydrocarbon samples, which are maintained at constant pressure by pre-charging cylinders with gas. Design features include stable non-roll square section construction, built-in sample volume indicator, and glycol filled gauges. Operating temperature range is -20 to 100 deg C and max operating pressure is 100 bar.

Shimadzu Scientific Instruments, Inc.
Columbia, MD 21046
Jan 29, 2002 SIL-HT Series HPLC autosamplers have built-in full-function system controllers to enable integration into virtually any modular setup. They can accomodate up to 350 1 mL vials, 210 1.5 mL vials, 100 4 mL vials as well as up to 4 titer plates, either 384 or 96-well format. Needle-in-the-flow-path injection method coupled with high-precision metering pump provide no-loss sample application. PEEK components minimize sample carryover to near zero.

AMS, Inc.
American Falls, ID 83211 1230
Jan 29, 2002 Piston Sampler collects discrete interval samples in difficult conditions, such as flowing/heaving sands and swelling clays using any direct push system. System also works in soils below groundwater, and prevents liner failure during sample collection. Using either or both of 2 core catcher options can minimize chance of losing soil sample.

Jiskoot Inc.
Houston, TX 77014
Nov 08, 2001 710EL samplers, suitable for most liquids, take large number of individual sample grabs of 1 cc or 3 cc that together accurately represent quality of fluid. Sampling rate is up to 50 per minute. Units comprise probe and cell sampler which both use electric motor directly coupled to sampler. Two probe lengths are offered, for use in 8 in. to 52 in. pipelines which can be mounted in any orientation through 2 in. or 3 in. ANSI 150/300# RF flange.