AC/DC Power Supply serves heavy-use, industrial applications.
Press Release Summary:
Comprising single-output, 650 W units, 10 x 4.2 x 2.5 in. HHP650 series accommodates 85–305 Vac input, delivers up to 780 W at high line input, and exhibits 85% typ efficiency. Peak power capability provides up to 800 W at low line and 1,000 W at high line for 10 sec max. In addition withstanding 6 kV surge (IEEEStdC62.41), fan-cooled units conform to shock and vibration specification MIL-STD-810F and are immune to voltage sag (SEMI-F47). Nominal output voltages range is +12 to + 48 Vdc.
Original Press Release:
Robust 650 W AC-DC Supply Complies with MIL-STD-810F and ANSI/ISA Standard for Demanding Applications
XP Power today announced the HHP650 series of fan-cooled rugged AC-DC power supplies designed for heavy-use industrial applications where a more robust unit is required. These single output 650 Watt units can accommodate the extended voltage input range from 85 – 305 VAC, and can deliver up to 780 Watt at high line input. In addition, the HHP650 has a peak power capability that provides up to 800 W at low line and 1000 W at high line for a maximum of 10 seconds.
Suitable for use in the most demanding of industrial environments, the HHP650 conforms to the shock and vibration specification of MIL-STD-810F, has immunity to voltage sag as stipulated by semiconductor manufacturing standard SEMI-F47 and can withstand a 6 kV surge as defined by IEEEStdC62.41. The units are also certified against the safety standard for industrial control equipment UL508, international safety standard UL/EN/IEC 60950, and the specification for equipment used in hazardous locations ANSI/ISA12.12.01-200 (previously UL1604). The power supplies also benefit from conformal coating. Operating temperature range suits most industrial environments and is from -40 degrees to +70 degrees C, with no derating until +50 degrees C.
The compact high efficiency HHP650, typically 85% efficient, has an internal end mounted variable speed fan and measures 10 x 4.2 x 2.5 inches (253.8 x 106.8 x 63.5 mm).
The HHP650 series comprises six models providing the popular nominal output voltages from +12 to + 48 VDC. A trim function provides the adjustment of +/- 10% from stated nominal output in order to cater for non-standard voltage requirements. An auxiliary always on output of +5 V / 0.2A can be used to power logic and memory functions.
Protection and control signal features include DC OK, remote on/off, remote sense, overvoltage, short circuit and overtemperature.
Single wire current sharing can also be incorporated when addition output power is required, or to build in redundancy. A DC OK volt free relay is also included.
The HHP650 is priced $265.20 in 500 pcs quantities, comes with a 3 year warranty and is available from Newark or direct from XP Power.
For further information and reader enquiries:
Duane Darrow
XP Power
990 Benecia Avenue
Sunnyvale, CA 94085
Tel:Â (971)-322-0326
Email: ddarrow@xppower.com
Fax: (408)-732-2002Â
Web: www.xppower.com
William Sng SK
XP Power (Singapore) PTE LTD
Tel: +65 68469368Â Â
Email: wsng@xppower.com
Fax: +65 67418730Â Â
Web: www.xppower.com
For further information, text and graphics by email or to discuss feature article opportunities:
Robert Huntley
Publitek Limited
18 Brock Street
Bath, BA1 2LW, United Kingdom
Tel: +44 (0) 1225 470000Â
E-mail: robert.huntley@publitek.com
Fax:Â +44 (0) 1225 470047Â
Web: www.publitek.com
Notes
XP Power is committed to being a leading provider of power solutions, including AC-DC power supplies and DC-DC converters. With ISO9001:2008, XP Power offers total quality, from in-house design through to manufacturing facilities around the world. The company offers the widest range of power products available from one source and unrivalled technical and customer support, aiding both vendor consolidation and cost reduction programmes. XP has 27 sales offices throughout Europe, North America and Asia.
XP Power Ltd, a London Stock Exchange listed public company, has design centres in Fyfield (UK), Orange County (California), and Singapore, which also serves as the company’s headquarters. Manufacturing is carried out near Shanghai, China and Ho Chi Minh City, Vietnam. The design teams push back the boundaries of cost and technology, providing market leading power products. Dedicated in-house Engineered Solutions teams provide customer specific solutions, with rapid response times. The applications team provide expert technical support to help customers integrate and use XP power products worldwide.
www.xppower.com
Tina O'Mahoney
Publitek
T: +44 (0) 1225 470 000
E: tina.omahoney@publitek.com
W: www.publitek.com
18 Brock Street
Bath, BA1 2LW, UK
