ThomasNet News Logo
Sign Up | Log In | ThomasNet Home | Promote Your Business

Wilbrecht LEDCO Surface Mount Resistors Earn DSCC Approval

Print | 
Email |  Comment   Share  

Wilbrecht LEDCO Surface Mount Resistors Earn DSCC Approval
Wilbrecht LEDCO Surface Mount Resistors Earn DSCC Approval
Click Here to Enlarge Picture

(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)

Wilbrecht LEDCO Inc., A Div. of Microprecision Electronics Inc.
1400 Energy Park Dr.
Saint Paul, MN, 55108
USA



Press release date: May 28, 2013

St. Paul, MN -- Wilbrecht LEDCO, Inc., a subsidiary of Microprecision Electronics SA, announces that its surface-mount resistors have received Defense Supply Center, Columbus (DSCC) approval. The Bulk Metal® Foil surface mount resistors are manufactured based on Vishay Precision Group (VPG) technology. The DSCC, part of the Defense Logistics Agency, uses the approvals to identify suppliers who demonstrate their products have met specific performance, quality and reliability levels.

Surface Mount Resistors

Wilbrecht LEDCO is an approved DSCC Vendor for its Bulk Metal Foil surface mount resistors, commercial models VSM and VSMP (Z-Foil) that are tested to MIL-PRF-55342. These resistors are available in five different sizes (between 0805 and 2512) and are constructed to consistently meet strict low temperature coefficients (TCR) and tight absolute tolerances. Bulk Metal Foil resistors supplied by Wilbrecht LEDCO offer a TCR of ±0.2 ppm/°C over the range −55°C to +125°C and resistance tolerance to 0.01%. The resistors offer load life stability to ±0.005% at 70°C, thermal stabilization time <1 s (nominal value achieved within 10 ppm of steady state value), and electrostatic discharge (ESD) at least to 25 kV.

Through-Hole Resistors

The company was also named as a qualified vendor on the DSCC's Qualified Products List (QPL) for its Bulk Metal Foil through-hole resistors, series WQ, WT, WS and WZ. The metal foil ultra-precision resistors are designed to meet the most stringent temperature and drift stability requirements. They are also built to MIL-PRF-55182/9 specifications and are listed in the Qualified Products Database for RNC90 by the Defense Logistics Agency (DLA).

Centrally located in Huron, SD, the Wilbrecht LEDCO QPL-certified manufacturing plant is also a Vishay Precision Group authorized precision center and will trim, test and ship these Bulk Metal Foil resistors in smaller quantities and selected values within five days to meet the ever-increasing short lead times required for new product design and development.

For more information, contact Wilbrecht LEDCO, Inc., St. Paul, MN at 651-659-0919 or toll-free at 888-323-8751.

Email: info@wilbrechtledco.com. Web: http://www.wilbrechtledco.com.

More Information Contact
Wilbrecht LEDCO Next Communications, Inc.
10249 Yellow Circle Drive
Suite 10
Minnetonka MN 55343
952.934.8220
Print | 
Email |  Comment   Share  
Contacts: View detailed contact information.


 

Post a comment about this story

Name:
E-mail:
(your e-mail address will not be posted)
Comment title:
Comment:
To submit comment, enter the security code shown below and press 'Post Comment'.
 



 See related product stories
More .....
 See more product news in:
Electronic Components and Devices
 More New Product News from this company:
Snap Action Microswitches are qualified under UL61058.
Industrial Double Break Electrical Switch is IP67/68 sealed.
Bipolar Power Indication LEDs support front/rear panel mounting.
SMT Precision Foil Resistors meet low TCR, tight tolerances.
Subminiature Switch features UL and ENEC certification.
More ....
| Featured Manufacturing Jobs
 Other News from this company:
Sealed Micro Switch Likes it Humid
Wilbrecht LEDCO, Inc. Signs Agreement with VISHAY® Precision Group to Be an Official Precision Center for Surface Mount Devices
Wilbrecht LEDCO's Precision Snap Action Switch Receives ATEX Certification
New Wilbrecht LEDCO Website Features Easier Navigation and Comprehensive Product Information
More ....
 Tools for you
Watch Company 
View Company Profile
Company web site
More news from this company
E-mail this story to a friend
Save Story
Search for suppliers of
Metal Foil Resistors
Surface Mount Resistors
Join the forum discussion at:
Wired In


Home  |  My ThomasNet News®  |  Industry Market Trends®  |  Submit Release  |  Advertise  |  Contact News  |  About Us
Brought to you by Thomasnet.com        Browse ThomasNet Directory

Copyright © 2014 Thomas Publishing Company. All Rights Reserved.
Terms of Use - Privacy Policy



Error close

Please enter a valid email address