ThomasNet News Logo
Sign Up | Log In | ThomasNet Home | Promote Your Business

U.S. Department of Energy Deploys Virtual Reality Training Solution from Invensys Operations Management

Print | 
Email |  Comment   Share  

U.S. Department of Energy Deploys Virtual Reality Training Solution from Invensys Operations Management
U.S. Department of Energy Deploys Virtual Reality Training Solution from Invensys Operations Management
Click Here to Enlarge Picture

(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)

Invensys PLC
Portland House
London, United Kingdom



Press release date: October 16, 2012

- SimSci-Esscor solutions help train clean-coal power plant operators -

HOUSTON, TEXAS - Invensys Operations Management, a global provider of technology systems, software solutions and consulting services to the manufacturing and infrastructure operations industries, announced that it has implemented a unique operator training simulator for the U.S. Department of Energy (DOE) using Invensys Operations Management's SimSci-Esscor® EYESIM® virtual reality training solution.

Designed for use within integrated gasification combined cycle (IGCC) power plants with carbon capture, and implemented at the National Energy Technology Laboratory's (NETL) Advanced Virtual Energy Simulation Training and Research (AVESTAR) Center in Morgantown, W.Va., the EYESIM solution uses 3-D virtual reality simulation to help train power plant control room and field operators. Wearing a stereoscopic headset, IGCC field operators are immersed in a virtual environment with the ability to move throughout the plant, coordinating their activities with control room operators and interacting as if they were in the actual facility.

The EYESIM solution is also fully integrated with plant operating models, built on Invensys Operations Management's SimSci-Esscor DYNSIM® dynamic simulation software, so actions taken by a field operator affect the plant's process, and actions performed in the control room change the information visible to the field operator. Fully interactive animations respond and react to the actions of plant personnel, illustrating how various pieces of equipment will operate under almost any scenario and condition. As a result, field and control room operators learn to collaborate and perform as a team.

"Training IGCC operators require us to simulate the chemical process of coal-gasification with CO2 capture together with combined-cycle power generation," said Stephen E. Zitney, Ph.D. and director of NETL's AVESTAR Center. "No one has ever done that before, but now with help from Invensys, we can simulate almost any operating scenario, including disturbances, malfunctions and emergency shutdowns. We can even train operators on different coal and biomass feed stocks. The developments we've accomplished and the technology we've installed at the AVESTAR Center show the growing viability of IGCC power plants and indicate the growing demand for a well-trained work force. We look forward to working with Invensys as we train and enable the clean-coal operators of the future."

The U.S. Energy Information Administration estimates that the United States has enough coal to last more than 200 years, but plants that continue to use conventional fossil fuel technologies will emit unacceptable levels of CO2 and other pollutants. IGCC with carbon capture offers an environmentally friendly alternative by capturing 90 percent of the CO2 produced by traditional fossil-fuel burning processes while at the same time reducing sulfur, mercury and other NOx emissions. The IGCC process is more environmentally friendly than other coal-burning processes, but it is also extremely complex and requires skillfully trained personnel to operate what is effectively both a chemical processing plant and a power plant.

"Our EYESIM immersive training system makes the theoretical and conceptual side of training more realistic and tangible by allowing operators and trainees to become familiar with the layout of the physical plant and how it will operate under almost any condition," said Tobias Scheele, Ph.D., vice president, advanced applications, Invensys Operations Management. "The solution combines stereoscopic 360-degree views with collision effects, sounds, lighting and weather conditions to give the plant operator a realistic walkthrough environment and simulated hands-on experience with the plant's physical operation, helping plant personnel improve operations excellence."

A separate EYESIM virtual reality training system will be installed and commissioned at West Virginia University in Morgantown for student education and simulator training as part of assigned course work. In addition to training and plant design functions, the NETL and its research and development partners, including Invensys, will use the simulator to showcase the feasibility of clean-coal technology as a means to support future electrical generation demand without emitting environmental pollutants or greenhouse gases. The formal site acceptance test was completed on July 16, 2012, after a complete plant start-up.

For more information about AVESTAR and the NETL, visit http://www.netl.doe.gov/avestar. For more information about Invensys Operations Management's SimSci-Esscor simulation solutions, visit http://iom.invensys.com/EN/Pages/SimSci-Esscor.aspx.

About Invensys Operations Management
Invensys Operations Management, a division of Invensys, is a leading provider of automation and information technology, systems, software solutions, services and consulting to the global manufacturing and infrastructure industries. Headquartered in Houston, Texas, its solutions are used by more than 40,000 clients around the world in more than 200,000 plants and facilities.

Invensys Operations Management's offerings are delivered under several prominent industry brands, including Avantis, Eurotherm, Foxboro, IMServ, InFusion, SimSci-Esscor, Skelta, Triconex and Wonderware. The company's approximately 9,000 employees and its global partner ecosystem integrate these products and services to help clients collaborate across systems and enterprises in real time, extracting critical data to make faster, better decisions and synchronize their operations from the plant floor to the executive offices, aligning production goals with business objectives. To learn more about Invensys Operations Management, visit iom.invensys.com.

Emergencies such as gas leaks can be simulated to improve operator response and increase safety.

Invensys, the Invensys logo, Avantis, DYNSIM, Eurotherm, EYESIM, Foxboro, IMServ, InFusion, SimSci-Esscor, Skelta, Triconex and Wonderware are trademarks of Invensys plc, its subsidiaries or affiliates. All other brands and product names may be trademarks of their respective owners.

Tom Clary
Director, Media Relations
Invensys Operations Management
T 469.365.6651
M 214.549.5629
Print | 
Email |  Comment   Share  
Contacts: View detailed contact information.


 

Post a comment about this story

Name:
E-mail:
(your e-mail address will not be posted)
Comment title:
Comment:
To submit comment, enter the security code shown below and press 'Post Comment'.
 



 See related product stories
More .....
 See more product news in:
Software
 More New Product News from this company:
Batch Process Software integrates with ArchestrA System Platform.
Alarm and Bypass Management Tool carries TÜV certification.
Inventory Management Software enhances tank information systems.
Refinery Software enables process modeling and optimization.
General Purpose Safety Control System suits SIL 2 applications.
More ....
| Featured Manufacturing Jobs
 Other News from this company:
Invensys' Skelta Offering Wins 2010 Red Herring 100 Global Award
Invensys Earns Customer Value Enhancement Award from Frost & Sullivan
Invensys Operations Management Wins Contract with Bluewater
Invensys Plc Demonstrates Long-Term Commitment to Kazakhstan
More ....
 Tools for you
Watch Company 
Company web site
More news from this company
E-mail this story to a friend
Save Story
Search for suppliers of
Simulation Software
Training Aids, Programs & Systems
Virtual Reality Equipment
Virtual Reality Software
Join the forum discussion at:
Engineers Lounge


Home  |  My ThomasNet News®  |  Industry Market Trends®  |  Submit Release  |  Advertise  |  Contact News  |  About Us
Brought to you by Thomasnet.com        Browse ThomasNet Directory

Copyright © 2014 Thomas Publishing Company. All Rights Reserved.
Terms of Use - Privacy Policy



Error close

Please enter a valid email address