TITANIUM 2012 to Reveal advanced powder metallurgy technology.August 13, 2012 -
Advanced Materials (ADMA) Group Inc. will sponsor presentations in powdered metallurgy speaker panel at TITANIUM 2012, which will be held October 7-10 in Atlanta, GA. Annual conference and exhibition will look at "Transformational Non-Kroll Process Hydrogenated Titanium Powder Production" paper, "Powder Metallurgy Titanium and Titanium Alloy Components Manufactured from Hydrogenated Ti Powder" presentation, and demonstration of various Titanium alloys produced by BEPM approach.
ADMA to Unveil Advanced Powder Metallurgy Technology at TITANIUM 2012 |
International Titanium Association
2655 W. Midway Blvd.
Broomfield, CO, 80020
USA
Press release date: August 8, 2012
DENVER -- Advanced Materials (ADMA) Group Inc., Hudson, OH, will sponsor presentations in a powdered metallurgy speaker panel at TITANIUM 2012, the 28th annual conference and exhibition, which will be held Oct. 7-10, 2012 at the Hilton Atlanta, 255 Courtland Street NE, Atlanta.
During the last 12 months, the global titanium industry has focused on advances in powder metal technology as a lower-cost alternative to produce titanium.
One paper, titled "Transformational Non-Kroll Process Hydrogenated Titanium Powder Production," will profile ADMA's non-Kroll process for manufacturing hydrogenated titanium sponge and powder. ADMA has designed and installed a laboratory scale titanium powder-manufacturing unit that has produced ADMA Hydrogenated Titanium Powder (ADMA TiH2).
Company officials will describe how hydrogenated titanium sponge, produced by ADMA's technology, can be easily ground into powder for the production of commercially pure titanium or any titanium alloy components via "Blended Elemental Powder Metallurgy." The presence of hydrogen during the sintering phase results in titanium components with very low interstitial content that easily meet and surpass ASTM and AMS requirements, the company says. In addition, because of their high purity and low interstitial content, ADMA TiH2 powder components can be welded; something that, until now, hasn't been achieved by a low-cost, powder-metal titanium process. ADMA executives also will outline current developments in the design and installation of a pilot-scale hydrogenated titanium powder production system.
Another presentation, "Powder Metallurgy Titanium and Titanium Alloy Components Manufactured from Hydrogenated Ti Powder," will discuss low cost, room temperature, powder metallurgy solid-state consolidation processes, including die pressing, direct powder rolling, and cold-isostatic pressing, followed by vacuum sintering, to produce a broad range of titanium and titanium alloy components from ADMA TiH2.
Several high-performance, finished components for critical applications, along with details on their mechanical properties, chemistry and microstructures, will be presented. Company officials will show the transformational, low-cost, powder metallurgy manufacturing of commercially pure titanium and titanium alloy components from ADMA TiH2 powder brings improved performance to critical industrial applications. According to ADMA, extensive testing has consistently demonstrated material properties that are equal or superior to those obtained via conventional titanium ingot metallurgy.
Another presentation in the Session will demonstrate various Titanium alloys produced by the Blended Elemental Powder Metallurgy (BEPM) approach can be effectively heat treated to the strength levels achieved by ingot metallurgy STA alloys of identical composition. Analysis of the post-sintering treatments and response of the BEPM Titanium alloys to heat treatment will be discussed. The results obtained on high strength alloys widely used in the aerospace industry such as Ti-10V-2Fe-3Al and Ti-5Al-5Mo-5V-3Cr will be presented.
Dr. Colin McCracken, Technical Director for AMETEK - Reading Alloys, will be participating in the Session giving a presentation on Plasma Spheroidized (PS) Titanium Powders. Reading Alloys has developed a new Plasma Spheroidized (PS) Titanium powder that incorporates a spheroidization process step, which produces a cost effective high tap density titanium powder. This free flowing powder also exhibits no satellites and/or particle agglomerates. Dr. McCracken's presentation will outline the manufacturing route and key powder characteristics of a spherical titanium powder derived from a hydride-dehydride powder.
TITANIUM 2012 represents an efficient way for delegates to gain timely market intelligence and meet potential partners, customers and vendors. Learn more about the upcoming event at www.titanium.orgor contact the ITA at (303) 404-2221.
Contact: Jennifer Simpson, Executive Director Denver, Colorado USA 1-303-404-2221 Telephone 1-303-404-9111 Facsimile conference@titanium.org Email
|
|
|
|
|
|
|
|
|
|
|
