Products in the News

Oil and Gas Wiring Conduits

Share Like Tweet Add Email

Anamet Electrical, Inc.

1000 Broadway Ave. E., Mattoon, IL, 61938, USA

Original Press Release

Oil and Gas Wiring Conduits

Press release date: April 22, 2014

Anamet Electrical offers several lines of Anaconda SEALTITE® suitable for the extreme environments associated with the petrochemical industry.

• HTUA: Special PVC cover, Temperature range -51°F to +221°F (-46°C to +105°C)
• HCX: Extreme temperature jacket, Temperature range -76°F to +302°F (-60°C to +150°C)
• EFL: Lightweight corrosion resistant aluminum core, Temperature range -4°F to +140°F (-20°C to +60°C)
• ZHUA: Special Zero Halogen cover, Temperature range -40°F to +176°F (-40°C to +80°C)
• OR: Special Oil Resistant PVC cover, Temperature range -9°F to +221°F (-23°C to +105°C)

Type HTUA

UL Listed, CSA Certified Higher and Lower Temperatures Liquid Tight Flexible Metal Conduit (LFMC) Construction

• Constructed of continuously interlocked hot dipped zinc galvanized steel core for exceptional crush and corrosion resistance.
• Durable, sunlight resistant and flame retardant thermoplastic PVC jacket that resists heat, oil and chemical breakdown.
• Designed for most extreme temperature applications.

NEC Articles
• Article 250.118 (6) Equipment Grounding
• Article 300.22 (D) Information Technology Equipment
• Article 350 Liquid-Tight Flexible Metal Conduit (LFMC)
• Article 501.10 (B) (2) Class I Div. 2
• Article 502.10 (A) (2) and (B) (2) Class II Div. 1 2
• Article 503.10 (A) (3) and (B) Class III Div. 1 & 2
• Article 620.21 Elevator Wiring Methods
• Article 645.5 (E) (2) Under Raised Floors

Installation
• Conduit used with standard liquid-tight
connector for easy installation.
IP 66/67 Rated when installed with approved connectors.
• Approved for both exposed and concealed locations Rated for temperature ranges UL temps -51°F to + 221°F (-46°C to +105°C), CSA -51°F to 167°F (-46°C
to +75°C).
• Approved as an equipment grounding conductor in sizes 3/8" through 1-1/4" if the total grounding path is 6 ft. or less and the circuit conductors are protected by over 20 amps for 3/8" and 1/2" and 60 amps or less for 3/4" through 1-1/4".
• Suitable for use in hazardous locations per NEC Articles 501 Class I Div. 2, Article 502 Class II Div. 1 & 2, Article 503 Class III Div. 1 & 2.
• Manufactured in a full range of trade sizes from 3/8" through 4".
• Approved for direct burial and in concrete trade sizes 3/8" through 4".
• Complies with UL Standard 360 File No. E18917; CSA C22.2 File No. 158897; and NEC Article 350.

Type HCX

Extreme Temperature Jacket Liquid Tight Flexible Metal Conduit (LFMC) Construction

• Constructed of continuously interlocked hot dipped zinc galvanized steel core for exceptional crush and corrosion resistance.
• Durable, sunlight resistant thermoplastic rubber jacket that resists heat, oil and chemical breakdown.

Installation
• Conduit used with standard liquid-tight connector for easy installation. IP 66/67 Rated when installed with approved connectors.
• Delivers superior wiring protection where agency approvals are not required.
• Manufactured in a full range of trade sizes from 3/8" through 4".
• Smooth appearing jacket for exposed applications.
• Rated for temperature range of -76¢ªF to +302¢ªF (-60¢ªC to +150¢ªC).
• Provides liquid-tight raceway for electrical conductors

Type ZHUA

Zero Halogen, Low Smoke, Low Flame Spread UL Listed Liquid Tight Flexible Metal Conduit

Construction

• Constructed of continuously interlocked hot dipped zinc galvanized steel core for exceptional crush and corrosion resistance.
• Durable, sunlight resistant, flame retardant, LOW SMOKE and ZERO HALOGEN TPU jacket that resists heat, oil and chemical breakdown.
• Designed for most extreme temperature applications.
• Meets the demands of today’s higher temperature rated conductors.

MEETS or EXCEEDS the following STANDARDS

• Flame Spread Index ASTM E162
• Smoke Density (Generation) ASTM E662
• Toxic Gas Generation Bombardier BSS 7239
• Jacket Material is U.L. 94 Certified
• Conduit is U.L. 360 Listed

NEC Articles
• Article 250.118 (6) Equipment Grounding
• Article 300.22 (D) Information Technology Equipment
• Article 350 Liquid-Tight Flexible Metal Conduit (LFMC)
• Article 501.10 (B) (2) Class I Div. 2
• Article 502.10 (A) (2) and (B) (2) Class II Div. 1 & 2
• Article 503.10 (A) (3) and (B) Class III Div. 1 & 2
• Article 620.21 Elevator Wiring Methods
• Article 645.5 (E) (2) Under Raised Floors

Installation

• Conduit used with standard liquid-tight connector for easy installation. IP 66/67 Rated when installed with approved connectors.
• Approved for both exposed and concealed locations. Rated for temperature ranges -40°F to + 176°F (-40°C to +80°C).
• Approved as an equipment grounding conductor in sizes 3/8" through 1-1/4" if the total grounding path is 6 ft. or less and the circuit conductors are protected by over 20 amps for 3/8" and 1/2" and 60 amps or less for 3/4" through 1-1/4".
• Suitable for use in hazardous locations per NEC Article 501 Class I Div. 2, Article 502 Class II Div. 1 & 2, Article 503 Class III Div. 1 & 2.
• Manufactured in a full range of sizes from 3/8" through 4".
• Approved for direct burial and in concrete trade sizes 3/8" through 4".
• All Sizes Comply with UL Standard 360 File No. E18917; and Trade sizes 1/2" and 3/4" are CUL Listed.

Type EFL

Aluminum Core Light Weight Liquid Tight Flexible Metal Conduit (LFMC)

Construction

• Constructed of continuously interlocked aluminum core for exceptional crush and corrosion resistance.
• Durable, sunlight resistant thermoplastic PVC jacket that resists heat, oil and chemical breakdown.applications.
• Meets the demands of today’s higher temperature rated conductors.

Installation

• Conduit used with standard liquid-tight connector for easy installation. IP 66/67 Rated when installed with approved connectors.
• Delivers superior wiring protection where agency approvals are not required.
• Manufactured in a full range of trade sizes from 3/8" through 4".
• Smooth appearing jacket for exposed applications.
• Rated for temperature range of -4¢ªF to +140¢ªF (-20¢ªC to +60¢ªC).
• Provides liquid-tight raceway for electrical conductors.

Type OR

Special Oil Resistant Jacket Liquid Tight Flexible Metal Conduit (LFMC)

Construction

• Constructed of continuously interlocked hot dipped zinc galvanized steel core for exceptional crush and corrosion resistance.
• Durable, sunlight resistant thermoplastic PVC jacket that resists heat, oil and chemical breakdown.

Installation

• Conduit used with standard liquid-tight connector for easy installation. IP 66/67 Rated when installed with approved connectors.
• Delivers superior wiring protection where agency approvals are not required.
• Manufactured in a full range of trade sizes from 3/8" through 4".
• Smooth appearing jacket for exposed applications.
• Rated for temperature range of -9¢ªF to +221¢ªF (-23¢ªC to +105¢ªC).
• Provides liquid-tight raceway for electrical conductors.

STAINLESS STEEL CONNECTORS AVAILABLE IN 3/8" -1" STRAIGHT AND 90°

Construction

• Stainless Steel Type 304 connector, has a four piece construction consisting of a gland nut, sealing ring, high tensile grounding cone and body.
• Designed with an insulated throat to prevent wire damage during installation.
• Included sealing ring and stainless steel lock nut provides a means for connecting the fitting to boxes.
• Excellent corrosion resistance, strength and durability.

Installation

• Connector is ideal for use with standard liquid-tight conduit to allow easy installation. IP 66/67 Rated when installed with approved conduit.
• Approved for both exposed and concealed locations. Rated for temperature ranges -49ºF to + 221ºF (-45ºC
to +105ºC).
• Suitable for harsh industrial, food and beverage, petrochemical, waste water, salt water and other corrosive applications
• Suitable for use in hazardous locations per NEC Articles 501 Class I Div. 2, Article 502 Class II
Div. 1 & 2, Article 503 Class III Div. 1 & 2.
• Manufactured in a range of trade sizes from 3/8" through 1".
• Complies with UL Standard 514B and CSA C22.2 combined File No. E234207

Anamet Electrical, Inc.
1000 Broadway Ave East
Mattoon, IL. 61938
Customer Service: 1-800-230-3718
7:00am - 5:00pm Central Time

FIND US ON THE WEB - WWW.ANACONDASEALTITE.COM

Share Like Tweet Add Email

LIKE THIS ARTICLE? DON’T MISS OUT ON OTHERS! Get Thomasnet’s industry newsletter now

Comments

comments powered by Disqus