ISIS MAC Collaboration Solves Unique Engineering Challenge with Development of Metallised Ceramic Parts for Neutron Source
Share:
RUGBY, England, October 18 / -- ISIS, a world-class spallation neutron source based at the CCLRC Rutherford Appleton Laboratory, Oxfordshire, has commissioned a series of highly specialist metallised ceramic components from Morgan Advanced Ceramics as part of a major expansion project. The components are a fundamental element of new monitoring equipment to be installed inside the extracted proton beam forming part of the second target station currently being added to the facility.
ISIS has contributed significantly to many of the major breakthroughs in materials science, physics and chemistry since it was commissioned in 1985.
The GBP145 million Second Target Station Project (TS-2) will provide a second neutron source at the facility to double capacity and enable the ISIS science program to expand into the key research areas of soft condensed matter, bio-molecular sciences, advanced materials and nano-scale science.
One of many challenges for the project team was in the construction of the instrumentation to monitor the intensity of the extracted proton beam (EPB). Ceramic vacuum tubes used in the first target station were sealed with Indium wire, but experience had shown that these can become unreliable if disturbed. The ISIS team wanted to find a robust, zero-maintenance solution for TS-2.
Eamonn Quinn, a Senior Project Manager at Rutherford explains: "This is a radiation environment, so reducing the need for maintenance staff to enter the area was a key driver. We needed to find a way of producing a 100% reliable vacuum seal within the very tight tolerances of the design, and came up with the idea of trying a metallised ceramic."
Morgan Advanced Ceramics, a major manufacturer of technical ceramic materials and particularly in metallisation of ceramics, was the obvious choice of partner. Following initial discussions the two companies collaborated closely to develop a solution to what was essentially, a unique engineering challenge.
Eamonn Quinn again: "There were severe design constraints on the project because we insisted the new vacuum tubes should retrofit to the first target station, as well as be suitable for TS-2. The previous design based on alumina ceramic and mild steel worked well, apart from the Indium seal, and we wanted to stick with it as closely as possible."
There were two key challenges for Morgan Advanced Ceramics. This first was to come up with a design and a manufacturing process that would produce a robust, high integrity vacuum seal (leak rate 10-8mbar l/s) across a large component (200mm diameter). The second was to solve the problem of the differences in thermal co-efficient between the alumina ceramics of the tube and its mild steel flanges. Further, a very tight specification was set for the physical dimensions and cleanliness of the components.
Martin Davidson is the Morgan Advanced Ceramics Senior Engineer who led the ISIS project. "In a development like this you don't have the luxury of being able to produce a prototype to refine the process - there is neither time nor budget. We had to rely heavily on our experience to get it right first time. We worked very closely with the ISIS team to come up with a design that we knew we could manufacture, and that met all the project requirements."
The ISIS assembly is 158mm long with two nickel-plated mild steel flanges 240mm diameter insulated from each other by a pre-formed diamond ground alumina ceramic insulator. To ensure hermetic integrity of the assembly the ceramic is brazed in a hydrogen/nitrogen furnace at 850°C to two flanges made of nickel iron cobalt steel, chosen because it provides the best thermal expansion match to the ceramic. This process is achieved by applying a moly-manganese coating which is sintered at 1400°C, then electroplating a layer of nickel. The ceramic/metal brazed sub-assembly is then welded to the mild steel flanges with a stainless steel interface and machined to the final dimensions. The geometric tolerances are challenging, and critical.
The ISIS order is for a total of 13 components, in two varieties. Martin Davidson again: "There have been challenges along the way - in a project like this none of the parties expects everything to go right first time all the time - but together we have solved the problems as they have arisen."
Eamonn Quinn concludes: "The working relationship between the two companies has been very good throughout the project. We have benefited from the considerable experience of the Morgan Advanced Ceramics team at Rugby. It is great to have such world-leading expertise on our doorstep."
About Morgan Advanced Ceramics
Morgan Advanced Ceramics (MAC) has a comprehensive range of Ceramic materials, from which its products are manufactured. Supplying to a variety of demanding markets, MAC has established an enviable reputation for providing value-added solutions through world-class research and development, innovative design and, perhaps most important of all, application engineering.
As a subsidiary of The Morgan Crucible Company, MAC forms part of the Morgan Technical Ceramics Group. The Group includes Morgan Electro Ceramics and from manufacturing locations in North America, Europe and Asia, it supplies an extensive range of products, including ceramic components, braze alloys, ceramic/metal assemblies and engineered coatings.
For further information, please contact:
Lorraine Henry,
Tel: +44-(0)1299-872217
Email: lorraine.henry@morganplc.com
For further media information, please contact:
Rachel Owen,
email: rowen@freshwater-uk.com
Carl Sheen,
email: csheen@freshwater-uk.com
Freshwater Technology
1 Horsefair Mews,
Romsey, Hants.
SO51 8JG
Tel: +44(0)1794-521156
For more information on Morgan Advanced Ceramics visit
www.morganadvancedceramics.com or contact one of our sales offices
below:
UK & Eire
Morgan Technical Ceramics,
Bewdley Road,
Stourport,
Worcestershire,
DY13 8QR.
Tel: +44-1299-872210
Fax: +44-1299-872218
Email: mtcuksales@morganplc.com
Mainland Europe
Morgan Technical Ceramics Sales,
Teplitzerstr. 27,
D-84478 Waldkraiburg,
Germany
Tel: +49-8638-6004-326
Fax: +49-8638-6004-327
Email: mtceusales@morganplc.com
North America
Morgan Technical Ceramics Inc,
26 Madison Road,
Fairfield,
NJ 07004,
USA
Tel: +1-800-433-0638
Fax: +1-973-808-2257
Email: mtcussales@morganplc.com
Asia
Morgan Technical Ceramics,
158 Jiajian Road,
Jiading,
Shanghai 201818,
People's Republic of China.
Tel: +86-21-5990-0687
Fax: +86-21-5990-3241
Email: mtccnsales@morganplc.com
Source: Morgan Advanced Ceramics
