ThomasNet News Logo
Sign Up | Log In | ThomasNet Home | Promote Your Business

HVAC Power Metering Using Pulse Data Loggers

Print | 
Email |  Comment   Share  

HVAC Power Metering Using Pulse Data Loggers
HVAC Power Metering Using Pulse Data Loggers
Click Here to Enlarge Picture

(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)

CAS DataLoggers
12628 Chillicothe Rd., Unit J
Chesterland, OH, 44026

Press release date: February 20, 2012

T&D RTR-505-P Wireless Pulse Dataloggers

CHESTERLAND OH - CAS DataLoggers recently supplied the wireless datalogging solution for an HVAC contractor who needed to perform power monitoring for their client's 25 HVAC systems installed in a strip mall. The owner began searching for a compact yet cost-effective datalogging device that could connect to most commercially-available power meters to measure the pulse output. Anticipating an additional request to monitor the mall's temperature and humidity, the contractor also needed this device to be compatible with other datalogging models to measure other parameters including the temperature in a duct, the humidity of the airstream coming out of an air handler, etc. This solution would also need wireless communication to provide adequate coverage in out-of-the-way spots and also would have to support handheld data collection to save workers the time of checking each device manually, which would be too time-consuming to keep their appointments with other clients and projects.

The contractor installed 5 T&D RTR-505-P Wireless Pulse Dataloggers to monitor the mall's HVAC system energy usage using the pulse output, connecting them to energy meters via several Continental Control Systems WattNode WNC-P devices to work with the data loggers to give users 1 pulse per every watt hour. Additionally, a T&D TR-57DCi Handheld Data Collector was chosen for fast data accessibility. T&D RTR-505-P wireless loggers recorded pulse output taken from the mall's power meters, enabling cost-effective power monitoring--every hour users saw the energy consumption over the previous hour. Users could freely scale the result. Using the dataloggers' software, users converted the pulses back into energy to view kilowatt hours as a result.

Workers could easily combine the 505-P with other T&D dataloggers, placing them in heating ducts and attaching them to air handlers to measure other parameters including temperature and humidity, giving the contractor a comprehensive system with the flexibility to handle several different applications.

The compact T&D pulse data loggers were designed to record the changes in pulse count for contact signals (such as switches, relays, and thermostats) and Lo/Hi voltage signals that occurred during a set recording interval. The devices were capable of recording the total pulse count from the start of recording and also allowed for a variety of commercially available sensors to be connected to the included input module, widening the range of possible applications without workers having to travel back to change Base Units. Measuring voltage signals from 0 to 27V with a pulse response with a low of 0.5V or less, high of 2.5V or more, and a maximum pulse response of 3,500 pulses per second, the data loggers featured a large 16,000 reading storage capacity to keep logging for extended periods. Capable of counting up to 61,439 pulses per reading, the loggers' clear LCD displays showed current readings along with status, logging capacity, measurement range exceeded, and more, and the dataloggers also offered options for wall mounts to cover all the out-of-the-way spaces.

The T&D data loggers offered convenient data accessibility--it was simple to instantly download all the data via wireless communication using an RTR-505-P Base Unit. The wireless communication range between a Remote Unit and a Base Unit was about 500 feet (150 meters), and this range was easily extended by simply registering an RTR-500 as a Repeater to expand coverage. The datalogger's large logging capacity of up to 16,000 readings allowed users to set a recording interval of once an hour and keep monitoring for 665 days. It only took about two minutes for a Base Unit to finish wirelessly downloading one RTR-505 Remote Unit at full logging capacity. Data could also be collected remotely via USB and LAN.

Utilizing a low energy consumption design, the data loggers' lithium batteries had an estimated battery life of about 10 months operating at normal temperature. If the contractor needed to extend logging duration, T&D "L" model loggers featured a large capacity battery pack so that under the same conditions they could continue for about four years to save workers the trouble of replacing the battery.

Using the T&D handheld data collector, workers simply collected all the data from as far back as the parking lot, gathering and checking recorded data on the spot without having to waste time manually gathering the data loggers. Recording settings such as "Recording Interval" and "Recording Start" could also be made directly from the TR-57DCi into the loggers. Compatible with majority of T&D data loggers, the data collector stored an impressive 256,000 readings with a battery life of about 100 days at 1 hour of daily use. The collector's LCD display featured useful functions for quickly thumbing through the data. The T&D data collector could also communicate with a PC via USB.

The contractor benefited in several ways following installation of the T&D RTR-505-P wireless pulse data loggers. These compact devices connected with a broad range of power meters. When workers needed to monitor other parameters such as temperature and humidity, other T&D loggers could easily be inserted in the mall's heating ducts and attached to air handlers to provide a comprehensive monitoring system with the versatility to measure whatever the client requested. Data collection and organization was a snap with the loggers' wireless capability and the handheld data collector.

For more information on the T&D RTR-505P Wireless Pulse Datalogger, other wireless dataloggers from T&D, or to find the ideal solution for your application-specific needs, contact a CAS Data Logger Applications Specialist at (800) 956-4437 or visit the website at

Contact Information:
CAS DataLoggers, Inc.
12628 Chillicothe Road Chesterland, Ohio 44026
(440) 729-2570
(800) 956-4437
Print | 
Email |  Comment   Share  
Contacts: View detailed contact information.


Post a comment about this story

(your e-mail address will not be posted)
Comment title:
To submit comment, enter the security code shown below and press 'Post Comment'.

 See related product stories
More .....
 See more product news in:
Test and Measuring Instruments
 More New Product News from this company:
Oven Datalogger is designed for surface coating applications.
Wireless Temperature Dataloggers monitor HVAC performance.
Portable UHF RFID Readers track product temperature.
Output Module for Automotive Applications.
UHF RFID Temp Tags help maintain cold chain.
More ....
| Featured Manufacturing Jobs
 Other News from this company:
AIDS Research Lab Receives Lifetime Accsense Temperature Monitoring
Haitian Hospital Monitors Vaccine Temperatures Over WiFi
CAS DataLoggers to Attend USGS Water Data Conference
CAS DataLoggers Visits Jager and Delphin HQ in Germany
MadgeTech Releases New Data Logger Software Version 4.2
More ....
 Tools for you
Watch Company 
View Company Profile
Company web site
More news from this company
E-mail this story to a friend
Save Story
Search for suppliers of
Data Loggers & Data Logging Equipment
Wireless Data Collection Systems
Join the forum discussion at:
Wired In

Home  |  My ThomasNet News®  |  Industry Market Trends®  |  Submit Release  |  Advertise  |  Contact News  |  About Us
Brought to you by        Browse ThomasNet Directory

Copyright © 2014 Thomas Publishing Company. All Rights Reserved.
Terms of Use - Privacy Policy

Error close

Please enter a valid email address