Watt Stopper
Santa Clara, CA 95050
Share:
Lighting Control Panel complies with energy codes.
Lighting Integrator is available with BACnet option, which enables native level integration of lighting control with BACnet-based building automation system. Option also ensures lighting control compliance with energy codes such as ASHRAE 90.1 and IECC while eliminating need for BAS to support lighting-specific functions. With BACnet, users still have convenience of control options such as blink...
Read More »Lighting Panel offers web-based control.
Lighting Integrator is available with Automation Appliance web-based user interface, which enables multi-user access to all lighting control functions over Internet, intranet, or LAN connection through web browser. Scheduling capabilities include 7-day repetitive schedules, 365-day calendar date event type schedules, or dusk/dawn schedules. Product is suited for applications where remote user...
Read More »Scene Interfaces expand lighting control network.
House and Room Scene Interfaces enable wireless Miro lighting control network to interface with common residential electronic devices. Interfaces accept signals from maintained inputs such as switches or momentary inputs, including garage door openers, motion sensors, alarm systems, and time clocks. When signal is received from interfaced device, Scene Interface activates lighting scene such as...
Read More »
Occupancy Sensor has low-profile design and 360-
Available in line and low-voltage models, UT-300, CI-300, and DT-300 series mount on ceilings for unobtrusive appearance. While UT-300 features ultrasonic sensing technology and CI-300 employs passive IR technology for occupancy detection, DT-300 utilizes both. All series feature SmartSet(TM), where sensors automatically adjust time delay and sensitivity settings. Also featured, walkthrough mode...
Read More »
Lighting Control offers bi-level switching of HID fixtures.
Model DM-105-WP features low voltage outdoor motion sensor, which uses passive infrared technology to detect occupancy. During times of vacancy, controller switches lights to lower level. When occupants return, lights immediately return to high. Bi-level switching capability eliminates long restrike time associated with ON/OFF control of HID lighting. Rated for outdoor use, sensor and controller...
Read More »
Power Pack offers switching and dimming of lighting loads.
Intelligent Power Pack Model LC-100 features 2 relay outputs and dimming channels for up to 100 ballasts per channel. It contains inputs for connecting occupancy sensors, photosensors, building automation systems, and relay-based lighting control panels, enabling dimming, daylighting, load shedding, and blink warnings for 2 separate lighting loads simultaneously. Unit operates at 120 or 277 Vac...
Read More »
Digital Time Switches come in line- and low-voltage models.
Series TS-400 turns lights off after preset, user-selectable time out setting. Low voltage Model TS-400 and line voltage Model TS-400-24 feature terminal style wiring and push-button control. LCD indicates time remaining and optional alert warns occupants of impending shut-off. Time scroll option allows users to temporarily override time-out period. Units can also act as override ON or OFF switch...
Read More »
Power Pack provides 24 Vdc to power occupancy sensors.
Model BZ Dual Voltage Power Pack offers true 150 mA output and operates at 120 or 277 Vac, eliminating potential for ordering errors. Hold-OFF feature can be used to perform load shedding. During peak demand or power alert, signal from BMS or utility meter triggers BZ to hold-OFF or shed non-critical lighting loads. Hold-ON input is suitable for retail and commercial facilities that want to hold...
Read More »
Light Switch has built-in light sensor.
WS-200 passive infrared automatic wall switch turns lighting on and off based on occupancy and ambient light. Built-in light sensor holds electrical lighting off when natural light levels are above pre-set level. Infrared system uses pulse count processing and detection signature analysis to eliminate false triggers, reduce relay stress, and lengthen sensor life. Terminal style wiring eliminates...
Read More »
Lighting Control Panel comes with occupancy sensor.
Watt Stopper low-voltage relay lighting control panel has ultrasonic occupancy sensor that covers 600-2200 sq ft and hallways up to 90 linear ft. System can combine occupancy-based and scheduled control for applications such as offices, conference rooms, restrooms, lobbies, and corridors. Omni-directional sensor has signal processing to eliminate false triggers. Users can adjust detection...
Read More »Lighting Control Panel complies with energy codes.
Lighting Integrator is available with BACnet option, which enables native level integration of lighting control with BACnet-based building automation system. Option also ensures lighting control compliance with energy codes such as ASHRAE 90.1 and IECC while eliminating need for BAS to support lighting-specific functions. With BACnet, users still have convenience of control options such as blink...
Read More »Lighting Panel offers web-based control.
Lighting Integrator is available with Automation Appliance web-based user interface, which enables multi-user access to all lighting control functions over Internet, intranet, or LAN connection through web browser. Scheduling capabilities include 7-day repetitive schedules, 365-day calendar date event type schedules, or dusk/dawn schedules. Product is suited for applications where remote user...
Read More »Scene Interfaces expand lighting control network.
House and Room Scene Interfaces enable wireless Miro lighting control network to interface with common residential electronic devices. Interfaces accept signals from maintained inputs such as switches or momentary inputs, including garage door openers, motion sensors, alarm systems, and time clocks. When signal is received from interfaced device, Scene Interface activates lighting scene such as...
Read More »
Occupancy Sensor has low-profile design and 360-
Available in line and low-voltage models, UT-300, CI-300, and DT-300 series mount on ceilings for unobtrusive appearance. While UT-300 features ultrasonic sensing technology and CI-300 employs passive IR technology for occupancy detection, DT-300 utilizes both. All series feature SmartSet(TM), where sensors automatically adjust time delay and sensitivity settings. Also featured, walkthrough mode...
Read More »
Lighting Control offers bi-level switching of HID fixtures.
Model DM-105-WP features low voltage outdoor motion sensor, which uses passive infrared technology to detect occupancy. During times of vacancy, controller switches lights to lower level. When occupants return, lights immediately return to high. Bi-level switching capability eliminates long restrike time associated with ON/OFF control of HID lighting. Rated for outdoor use, sensor and controller...
Read More »
Power Pack offers switching and dimming of lighting loads.
Intelligent Power Pack Model LC-100 features 2 relay outputs and dimming channels for up to 100 ballasts per channel. It contains inputs for connecting occupancy sensors, photosensors, building automation systems, and relay-based lighting control panels, enabling dimming, daylighting, load shedding, and blink warnings for 2 separate lighting loads simultaneously. Unit operates at 120 or 277 Vac...
Read More »
Digital Time Switches come in line- and low-voltage models.
Series TS-400 turns lights off after preset, user-selectable time out setting. Low voltage Model TS-400 and line voltage Model TS-400-24 feature terminal style wiring and push-button control. LCD indicates time remaining and optional alert warns occupants of impending shut-off. Time scroll option allows users to temporarily override time-out period. Units can also act as override ON or OFF switch...
Read More »
Power Pack provides 24 Vdc to power occupancy sensors.
Model BZ Dual Voltage Power Pack offers true 150 mA output and operates at 120 or 277 Vac, eliminating potential for ordering errors. Hold-OFF feature can be used to perform load shedding. During peak demand or power alert, signal from BMS or utility meter triggers BZ to hold-OFF or shed non-critical lighting loads. Hold-ON input is suitable for retail and commercial facilities that want to hold...
Read More »
Light Switch has built-in light sensor.
WS-200 passive infrared automatic wall switch turns lighting on and off based on occupancy and ambient light. Built-in light sensor holds electrical lighting off when natural light levels are above pre-set level. Infrared system uses pulse count processing and detection signature analysis to eliminate false triggers, reduce relay stress, and lengthen sensor life. Terminal style wiring eliminates...
Read More »
Lighting Control Panel comes with occupancy sensor.
Watt Stopper low-voltage relay lighting control panel has ultrasonic occupancy sensor that covers 600-2200 sq ft and hallways up to 90 linear ft. System can combine occupancy-based and scheduled control for applications such as offices, conference rooms, restrooms, lobbies, and corridors. Omni-directional sensor has signal processing to eliminate false triggers. Users can adjust detection...
Read More »