M/A-COM Technology Solutions, Inc.

Broadband Diplexer targets CATV applications.
Electronic Components & Devices

Broadband Diplexer targets CATV applications.

Housed in 27 x 13 mmÂ- surface mountÂ- package,Â- 42/54 MHz Model MAFL-011013 is suited for space-constrained CPE applications.Â- RoHS-compliantÂ- diplex filter device features 75 Ω characteristic impedance, 0.5 dB insertion loss, and 50 dB isolation. Typical applications include HFC amplifiers and nodes, ONTs, STBs, eMTAs, andÂ- cable modems. Â-

Read More »
Communication Systems & Equipment

MMIC Power Amplifier serves high-power broadband applications.

Operating from 500 MHz to 3.0 GHz frequency range, MAAP-010168 is fully matched for input and output at 50 Ω, which eliminates need for sensitive external RF tuning components. This 10 W, 2-stage amplifier, fabricated using high-reliability pHEMT process, providesÂ- nominal gain of 24 dB with input and output return loss of 10 dB acrossÂ- frequency band. Features suit RF and microwave...

Read More »
Low Noise Amplifier supports X-Band applications.
Communication Systems & Equipment

Low Noise Amplifier supports X-Band applications.

Housed in 3 x 3 mm PQFN surface mount package, MAAL-010528 GaAs MMIC LNA provides nominal gain of 20 dB, OIP3 linearity of 26 dBm, and mid-band noise figure supply of 1.6 dB over 8.0–12.0 GHz frequency band. Unit features self-bias architecture which requires user to apply only single positive supply. Internally matched to 50 Ω input/output, 60 mA amplifier is suited for V-Sat, radar, and...

Read More »
Electrical Equipment & Systems

SPDT RF Switch suits low-voltage handset applications.

Supplied in 1 x 1 mm, 6-lead PDFN package, MASW-009444 suits RF switching applications with low control voltage requirements, such as handset filter switching down to 1.6 V. RoHS-compliant solution can also be used in most systems operating up to 6 GHz and requiring high power at low control voltage. Fabricated on GaAs PHEMT process, switch exhibits typ insertion loss of 0.3 dB at 1-2 GHz, with...

Read More »
Electrical Equipment & Systems

Broadband Switch suits high-linearity/power applications.

Available in 3 mm PQFN package, MASW-000822-12770T, 20 W broadband HMIC(TM) PIN diode SPDT switch is designed for applications such as WiMax and LTE. It offers broadband 50 MHz to 6 GHz operation for Tx and Rx states and achieves almost 30 dB of Tx to Rx isolation with less than 0.3 dB of associated insertion loss. Handling up to 20 W of CW power, T/R switch also achieves up to 64 dBm IIP3 for...

Read More »
Automatic ID

RFID System for Forklifts streamlines inventory management.

Powered by Impinj SpeedwayÂ-® Reader, RFID Forklift System records RFID-tagged pallet's exact storage location during handling and slotting processes. System utilizes acoustic sensor, broad beam antenna, and controller logic to identify RFID pallet tag loaded onto forklift and then identifies pallet storage location utilizing narrow beam antenna, laser-height sensor, and controller logic. New...

Read More »
Test & Measurement

M/A-Com Technology Solutions Introduces Integrated Global Positioning Systems (GPS) Module for Ford Sync System Platform

Innovative Receiver Module Offers Breakthrough Performance and Reduced Footprint for Mobile, Industrial, Handheld and Automotive Applications CES 2009 - LAS VEGAS - January 8, 2009 - Today at CES 2009 M/A-COM Technology Solutions, Inc., a leading provider of innovative microwave and RF design solutions and products, introduced a new, breakthrough integrated global positioning system (GPS) module,...

Read More »
Broadband Diplexer targets CATV applications.
Electronic Components & Devices

Broadband Diplexer targets CATV applications.

Housed in 27 x 13 mmÂ- surface mountÂ- package,Â- 42/54 MHz Model MAFL-011013 is suited for space-constrained CPE applications.Â- RoHS-compliantÂ- diplex filter device features 75 Ω characteristic impedance, 0.5 dB insertion loss, and 50 dB isolation. Typical applications include HFC amplifiers and nodes, ONTs, STBs, eMTAs, andÂ- cable modems. Â-

Read More »
Communication Systems & Equipment

MMIC Power Amplifier serves high-power broadband applications.

Operating from 500 MHz to 3.0 GHz frequency range, MAAP-010168 is fully matched for input and output at 50 Ω, which eliminates need for sensitive external RF tuning components. This 10 W, 2-stage amplifier, fabricated using high-reliability pHEMT process, providesÂ- nominal gain of 24 dB with input and output return loss of 10 dB acrossÂ- frequency band. Features suit RF and microwave...

Read More »
Low Noise Amplifier supports X-Band applications.
Communication Systems & Equipment

Low Noise Amplifier supports X-Band applications.

Housed in 3 x 3 mm PQFN surface mount package, MAAL-010528 GaAs MMIC LNA provides nominal gain of 20 dB, OIP3 linearity of 26 dBm, and mid-band noise figure supply of 1.6 dB over 8.0–12.0 GHz frequency band. Unit features self-bias architecture which requires user to apply only single positive supply. Internally matched to 50 Ω input/output, 60 mA amplifier is suited for V-Sat, radar, and...

Read More »
Mergers & Acquisitions

M/A-COM Technology Solutions Acquires Optomai, Inc

High Performance Modulator Drivers and Transimpedance Amplifiers to Enable Next Generation 40G and 100G Optical Networks Lowell, MA, April 26, 2011 - M/A-COM Technology Solutions (M/A-COM Tech) today announced that it has acquired privately-held Optomai, Inc. Optomai is a fabless semiconductor company that develops high performance integrated circuits and modules for next generation 40 Gbps and...

Read More »
People in the News

Robert Dennehy Appointed Vice President of Operations

Dennehy's extensive product knowledge and global experience to support company's growth strategy Lowell, MA - March 25, 2011--M/A-COM Technology Solutions (M/A-COM Tech), a leading supplier of semiconductors, active and passive components and subassemblies for radio frequency (RF), microwave and millimeter wave applications, announced today that Robert Dennehy is appointed Vice President of...

Read More »
People in the News

M/A-COM Technology Solutions Realigns Management Structure to Support Further Industry Leadership

o Joseph G. Thomas Retires as CEO o Chuck Bland Promoted as New CEO o Robert Donahue Promoted to COO o Suja Ramnath to Lead Business Units Lowell, MA - February 9, 2011 - M/A-COM Technology Solutions (M/A-COM Tech), a leading supplier of semiconductors, active and passive components and subassemblies for radio frequency (RF), microwave and millimeter wave applications, announced today a...

Read More »
Electrical Equipment & Systems

SPDT RF Switch suits low-voltage handset applications.

Supplied in 1 x 1 mm, 6-lead PDFN package, MASW-009444 suits RF switching applications with low control voltage requirements, such as handset filter switching down to 1.6 V. RoHS-compliant solution can also be used in most systems operating up to 6 GHz and requiring high power at low control voltage. Fabricated on GaAs PHEMT process, switch exhibits typ insertion loss of 0.3 dB at 1-2 GHz, with...

Read More »
Electrical Equipment & Systems

Broadband Switch suits high-linearity/power applications.

Available in 3 mm PQFN package, MASW-000822-12770T, 20 W broadband HMIC(TM) PIN diode SPDT switch is designed for applications such as WiMax and LTE. It offers broadband 50 MHz to 6 GHz operation for Tx and Rx states and achieves almost 30 dB of Tx to Rx isolation with less than 0.3 dB of associated insertion loss. Handling up to 20 W of CW power, T/R switch also achieves up to 64 dBm IIP3 for...

Read More »

All Topics