Premix Plastics, Inc.
Lake Mills, WI 53551
Share:
Polyacetal Compounds provide ESD protection.
With conductivity less than 1 x 105, PRE-ELEC 12-000 conductive compounds are based on copolymer polyacetal with carbon black or carbon fiber additive, while PRE-ELEC 12-031 compounds can be colored without affecting electrical properties. Ranging from 1 x 109 to 1 x 1011 Ã-§ÃÆ'ââ-¢, PRE-ELEC ESD 12-000 static dissipative compounds are colorable alloys of copolymer polyacetal and...
Read More »Compounds feature controlled resistance levels.
Electrically conductive PRE-ELECÃ-® CR products are fully compounded and can be molded without concern for hot spots. They allow users to specify electrical resistivity range, volume or surface, required for specific applications and provide alternative to inherently dissipative polymers for providing static dissipation. Manufactured with precision compounding techniques, products can be made...
Read More »
Compounds provide electrical conductivity.
PRE-ELEC compounds are based on chopped carbon fiber, milled carbon fiber, and carbon nanotubes. They are available with as much as 60% carbon fiber in nylon 6/66 and PPS, and at least 40% in others, including PP, ABS, PC, POM, and PSul. Compounds based on milled carbon fiber are less prone to warpage, while compounds that are based on carbon nanotubes can be electrically conductive with as...
Read More »
Static Dissipative Compound suits packaging applications.
HIPS-based static dissipative compound, PRE-ELEC ESD 6110, is formulated for co-extrusion of ESD sheet. Inherently dissipative polymer is colorable, washable, reusable, recyclable, clean, and permanently dissipative, even in conditions with humidity levels down to 12%. Polymer suits thermoformed ESD-proof packaging applications in the electronics, medical, pharmaceutical, and paper handling...
Read More »
Compounds use silver as conductive medium.
PRESEAL(TM) highly conductive, thermoplastic elastomers are formulated for EMI/RFI gasketing in electronics industry. They can be injection molded into complex shapes and sizes and can be extruded, or over-molded onto HIPS, ABS, PC/ABS, PC, and PPO-PS for molded-in gaskets. Compounds provide EMI shielding and have volume resistivity of
Read More »Polyacetal Compounds provide ESD protection.
With conductivity less than 1 x 105, PRE-ELEC 12-000 conductive compounds are based on copolymer polyacetal with carbon black or carbon fiber additive, while PRE-ELEC 12-031 compounds can be colored without affecting electrical properties. Ranging from 1 x 109 to 1 x 1011 Ã-§ÃÆ'ââ-¢, PRE-ELEC ESD 12-000 static dissipative compounds are colorable alloys of copolymer polyacetal and...
Read More »Premix Thermoplastics, Inc announces the appointment of Tapani Pöytäniemi as President of the company
Milton, WI Ã- (October 19, 2005) Premix Thermoplastics, Inc., a specialty compounder of electrically conductive thermoplastic compounds, announces the appointment of Tapani PÃ-¶ytÃ-¤niemi as President of the company. Prior to his appointment, PÃ-¶ytÃ-¤niemi was Product Manager for Conductive Compounds at Premix Oy, PremixÃ-¹s parent company in Rajamaki Finland . His...
Read More »Compounds feature controlled resistance levels.
Electrically conductive PRE-ELECÃ-® CR products are fully compounded and can be molded without concern for hot spots. They allow users to specify electrical resistivity range, volume or surface, required for specific applications and provide alternative to inherently dissipative polymers for providing static dissipation. Manufactured with precision compounding techniques, products can be made...
Read More »
Compounds provide electrical conductivity.
PRE-ELEC compounds are based on chopped carbon fiber, milled carbon fiber, and carbon nanotubes. They are available with as much as 60% carbon fiber in nylon 6/66 and PPS, and at least 40% in others, including PP, ABS, PC, POM, and PSul. Compounds based on milled carbon fiber are less prone to warpage, while compounds that are based on carbon nanotubes can be electrically conductive with as...
Read More »
Static Dissipative Compound suits packaging applications.
HIPS-based static dissipative compound, PRE-ELEC ESD 6110, is formulated for co-extrusion of ESD sheet. Inherently dissipative polymer is colorable, washable, reusable, recyclable, clean, and permanently dissipative, even in conditions with humidity levels down to 12%. Polymer suits thermoformed ESD-proof packaging applications in the electronics, medical, pharmaceutical, and paper handling...
Read More »
Compounds use silver as conductive medium.
PRESEAL(TM) highly conductive, thermoplastic elastomers are formulated for EMI/RFI gasketing in electronics industry. They can be injection molded into complex shapes and sizes and can be extruded, or over-molded onto HIPS, ABS, PC/ABS, PC, and PPO-PS for molded-in gaskets. Compounds provide EMI shielding and have volume resistivity of
Read More »