Company News

Spirax Sarco Inc.

1150 Northpoint Blvd., Northpoint Business Park, Blythewood, SC, 29016, USA

  • 800-883-4411

Latest New Product News from
Spirax Sarco Inc.

Fluid & Gas Flow Equipment

EP500 Electropneumatic Valve Positioner comes with IP65 rated enclosure.

February 6, 2017

Offering accuracy and industry-leading reliability with ease of installation, EP500 Electropneumatic Valve Positioner comes with calibration capabilities. Featuring NAMUR mounting and electrical access with compression wiring connectors, unit's cast aluminum enclosure is suitable for outdoor installations. Utilizing force-balance control technology, product can be mounted on actuators with... Read More

Chemicals & Chemical Processing

ASME 600 Thermodynamic Traps feature reduced warm up time.

November 28, 2016

Offering robust solution for medium pressure applications, ASME 600 offers UTDS46M, TDS46M in stainless steel and TDC46M in carbon steel body material. Protecting internals from dirt and debris with integral strainers, units are well suited to superheated steam mains and turbine drainage. Featuring superior shut off to minimize steam loss, unit is suitable for markets like oil & gas, specialty... Read More

Chemicals & Chemical Processing

Float and Thermostatic Steam Traps serve high-pressure processes.

October 20, 2016

Available in ½–1 in. sizes with screwed, SW, and flanged connections, FT62 range of ASME 600 float and thermostatic steam traps suit Oil & Gas and Specialty Chemical industries requiring accelerated and efficient condensate removal. Body material options are carbon steel (FTC62) and stainless steel (FTS62). Designed for maintainable drainage of small, high-pressure process... Read More

Chemicals & Chemical Processing

Inverted Bucket Steam Traps are designed for high pressures.

October 3, 2016

Offered in sizes from ½–3 in. and capacities up to 31,000 lb/hr, fully automatic IBV series are fabricated and manufactured to operate safely and comply with industry regulations. Each high pressure inverted bucket steam trap is designed with minimal fraction from mechanism movement, and valve closure, without any steam loss, is immediate. Standard offering includes carbon steel and alloy... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Rotor Insertion Flowmeter feature hot-tappable design.

July 7, 2016

Utilizing SMART multivariable electronics, Model RIM20 measures mass or volumetric flow, density, temperature, and pressure. Low-mass rotor design is fabricated from single solid block of stainless steel, with no welded joints. Hot-tappable design make installation and service possible without shutdown. Applications include measurement of steam and natural gas flows for fiscal or load control and... Read More

Test & Measuring Instruments

Inline Vortex Mass Flowmeter offers broad compatibility.

June 24, 2016

Offered in line sizes ½–12 in. with flange ratings up to 600 lb ANSI, VLM20 employs SMART multivariable transmitter with integral temperature and pressure sensor to provide all-in-one measurement solution. Precision 1,000Â Ω RTD and absolute pressure sensor calculate density for mass flow and thermal energy flow from chilled or hot water and condensate return system. Steam or gas... Read More

Fluid & Gas Flow Equipment

Pipeline Connectors eliminate need for process shutdown.

November 18, 2015

With single or double isolation, PC3000 and PC4000 Pipeline Connectors allow steam traps to be installed without need for process shutdown. Units feature ASME 600 rated forged body suitable for use on lines up to 800°F. Fully shrouded piston valve stem minimizes potential of corrosion, while strainer protects steam trap from debris entrained in condensate. Connectors are suitable for... Read More

Chemicals & Chemical Processing

Skid-Mounted Generator produces 1,275 lb/hr of clean steam.

October 6, 2015

Able to fit though standard 36 in. door, CSM-C 600 provides dry saturated steam that meets requirements of HTM2031, HTM2010, and EN285. It produces up to 1,275 lb/hr of clean steam at 45 psig and can be used in applications relying on sterilization or humidification as part of its process. Modulating control of water level and plant steam inlet delivers tight accurate control, while... Read More

Chemicals & Chemical Processing

Steam Trapping Station features leak-free body design.

September 23, 2015

Comprising isolation valve, steam trap connector with strainer, and check valve in modular single-piece body, STS17.2 Steam Trapping Station eliminates potential leak paths caused by multiple screwed connections. Technology allows steam trap to be changed in minutes, minimizing plant downtime. Featuring stainless steel components and pre-assembled construction, STS17.2 can integrate steam... Read More

Thermal & Heating Equipment

Heat Exchanger supports applications up to 4 million BTU's.

May 21, 2015

Incorporating S.I.M.S. technology, Spirax EasiHeat DHW delivers constant supply of hot water at stable temperature on demand, even with sudden wide load changes. Spirax Intelligent Monitoring System enables monitoring, diagnostics, and status communications. Information can be accessed remotely over Internet, through existing onsite communication systems, or through SMS text messaging/email.... Read More

Test & Measuring Instruments

Steam Trap Monitor operates wirelessly.

November 6, 2014

Featuring clamp-on design, STAPS Wireless delivers continuous, accurate monitoring and reporting of stream trap performance around plant without need to install cabling. There is no need for monitor to be checked manually, as head unit uses 2.4 GHz wireless technology to communicate performance details automatically back to central receiver. Data can then be interrogated using purpose-built STAPS... Read More

Controls & Controllers, Fluid & Gas Flow Equipment

Blowdown Control Valves maintain TDS at optimum level.

September 15, 2014

Available in ¾ and 1½ in. line sizes, BCV43 Series is suitable for all steam boiler TDS applications up to ASME class 600. Units keep blowdown to minimum, maintaining healthy steam and condensate system while conserving water and energy. Valves are engineered to minimize seat erosion ensuring consistent tight shut-off. Offered with electronic or pneumatic actuation, BCV43 Series features... Read More

Mechanical Power Transmission

Electric Linear Actuators offer speeds of up to 4.5 mm/sec.

November 18, 2013

Comprising smart, high-speed, linear electric actuators, AEL6 series is used to control steam and other industrial fluids without need for compressed air. Functionality meets fast response and fail-safe requirements of typical steam heat exchanger applications within institutional market. While design minimizes energy consumption and carbon emissions, installation and commissioning processes... Read More

Controls & Controllers, Fluid & Gas Flow Equipment, Mechanical Power Transmission

Electric Actuators are designed for facilitated commissioning.

October 22, 2013

Available for ½–4 in. control valves, AEL 5 series is reversible, having linear output, and features internal components – PCB, positioner card, limited switches – affixed to aluminum support for holding/fitting accessories. Design with easy commission limit switch adjuster lets user loosen cam with one screw and then adjust its position with second screw. Valve adaptor helps... Read More

Services

Asset Management Programs improve steam system effeciency.

September 17, 2013

By providing ongoing in-plant steam trap and utility leak maintenance, Steam System Asset Management programs enable complete steam system optimization. This is made possible via identification of opportunities and subsequent implementation regarding energy and utility efficiencies, productivity gains, improved plant availability and uptime, improved health and safety, and regulatory... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Mass Thermal Flowmeter comes in insertion and inline styles.

July 18, 2013

Without requiring additional transmitters or flow computers, insertion type MTI10 and inline MTL10 measure clean, dry gases and air using constant temperature sensing. Products are virtually immune to changes in temperature and pressure over flow range, and software facilitates setup, monitoring, and data logging of flowmeter via PC. Cal-V and Recalibration Verification lets users... Read More

Test & Measuring Instruments

Electromagnetic Flow Transmitter measures conductive fluids.

May 31, 2013

Combining pulse Hybrid method of coil excitation with digital communications, Model EFT10 offers solution for measuring all types of conductive liquid applications, including mining, slurries, waste, and low conductivity media. Advanced mag meter transmitter includes keypad for programming, 10-year memory, and batch control as well as RS485 Modbus interface, HART, two 4–20 mA outputs, and... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

ILVA Flowmeter includes compact stem accessory.

April 22, 2013

Available in 10 and 12 in. line sizes for saturated steam, liquid, and gas applications, Gilflo ILVA Flowmeter comprises ILVA, compact stem, manifold, and Scanner 2000 steam mass flow transmitter, which can output and display mass flow rates and totals. Specially profiled cone helps to reshape and flatten flow stream profile just before measurement point, so long straight runs are not... Read More

Fluid & Gas Flow Equipment, Sensors Monitors & Transducers

Bronze Safety Relief Valve works with liquid, steam, air, gas.

April 18, 2013

Engineered for industrial use, SV418 is rated to ASME and National Board Certified standards for Section VIII service – 750 psi for liquid, air, and gas and 300 psi for steam. Multiple-purpose safety relief valve, available in sizes from ½–3 in., is suited for use where quick, accurate reseating and minimal blow-down (or loss of medium) is important and high capacity is required.... Read More

Chemicals & Chemical Processing

Clean Steam Separator meets sterilization requirements.

February 15, 2013

Constructed of 316L stainless steel, Model CS10 is engineered to overcome problems associated with wet steam and ensure correct quality of steam is supplied to point of use, preventing damage to control valves. Fully traceable unit exceeds steam dryness value of 0.95 and features removable baffle that facilitates periodic de-rouging and inspection. CS10 is engineered in accordance with latest... Read More

Other Company News from
Spirax Sarco Inc.