Company News

Mencom Corporation

5750 McEver Rd., Oakwood, GA, 30566, USA

  • 770-534-4585

Latest New Product News from
Mencom Corporation

Computer Hardware & Peripherals, Electrical Equipment & Systems

Unmanaged Ethernet Switches meet EN61000-6-4 and EN61000-6-2 standards.

Jun 10, 2017

Mencom’s Unmanaged Ethernet Switches support redundant power-input that can be connected simultaneously to range of DC power sources. Operated in -10 to 70°C temperatures with steel and aluminum housing and in 0 to 60°C with plastic housing, Swicthes feature preset period time of 800 ms. Unit’s other live source acts as backup power need when any of the power input fails.

Read More

Fasteners & Hardware

MIXO Modular Inserts are resistant to mechanical stresses.

Apr 14, 2017

Available with types of connections ranging from small signal connectors with low amp and voltage, up to 200 amp connectors, MIXO Modular Inserts are mounted side by side and locked into metallic frame. Each insert is designed to fit and lock into frame sizes ranging from 1 module to 12 modules. Housing signal, power, data and pneumatics contacts for conduction with up to 8 bars pressure... Read More

Electrical Equipment & Systems, Fasteners & Hardware, Mounting & Attaching Products

CDSH Series Rectangular Inserts eliminate need for special wire preparation.

Feb 13, 2017

Available in 9, 18, 27, 42, 54 and 84 pole configuration, CDSH Series SQUICH Rectangular Inserts offer resistance against strong vibrations. Enabling quick identification of wired and non-wired terminals, connectors can be used with wires up to 2.5 mm^2. Featuring actuator buttons, units are rated to 10 A current and 400 V.

Read More

Electronic Components & Devices

Junction Blocks come with homerun connector.

Jan 13, 2017

Available in 7/8-16 MINI series, M12 & ½-20 Micro series, M8 Nano series, and DeviceNet Series circuit configurations, Junction Blocks meet IP67 rating for wet environments. Used in control systems and sensors having many I/O points, units are designed with 4 to 12 ports. 7/8-16 MINI series is available in 4, 6, and 8 ports with stainless steel housing, Micro Series and DeviceNet series with... Read More

Electronic Components & Devices, Mounting & Attaching Products

T-Type Hygienic Connector offers chemical resistant enclosures.

Dec 15, 2016

Available in two types T-Type/H and T-Type/C enclosures, T-Type Hygienic Series Connectors are designed for installation on food industry machines. Made of sanitizing resistant thermoplastic material, enclosures are certified by Ecolab technical application service and satisfy stringent requirements. Designed for production lines applications, T-Type/H features HNBR rubber sealing gasket.... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Material Handling & Storage

BIG Series Modular Hoods offer size 44.27.

Nov 21, 2016

Compatible with existing rectangular connectors, BIG Series Modular Hoods come in size 44.27. Enabling connection of push button selectors, switches and signaling lamps after necessary holes are drilled, unit’s upper and lower half compartments are connected by 4 screws with o-rings. Enabling power supplies or signaling circuits even after connectors are coupled, unit offers one or more top... Read More

Fasteners & Hardware

Locks secure MIN series connections in harsh environments.

Aug 12, 2016

To prevent unexpected interruptions, MIN series locks secure connection between 2 straight MIN plugs or between straight MIN plug and mating receptacle. Padlock hole ensures layered protection via authorized connection access. After padlock removal, locks can be opened via screwdriver insertion. Plug-to-Receptacle connection locks come in MIN size I (7/8 in.) and PMIN (1 3/8 in.) series;... Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment

M12 Circular Receptcles feature front lock nut.

Jul 19, 2016

Available in multiple pole configurations ranging from 2–12 poles, Front Mount M12 Circular Receptacles are designed for thread mount applications that need specific keyway orientations due to space constraints. Units allow keyway to be freely rotated to any orientation required by adjusting connector and front lock nut. Offered in both PG9 and M16 mounting thread options, UL listed receptacles... Read More

Material Handling & Storage

Cable Entry System accelerates insertion and sealing.

Jun 20, 2016

While offering IP66 sealing, KADP series allows standard cables with 1.5–20 mm dia to be pushed through pre-punched membrane into control cabinets, panels, or machines. Insertion method and tight fitting entry points accelerates assembly while increasing packing density. Made of plastic molded with industry-grade elastomer, cable entry plate frame provides tool-free installation by snapping... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Power Distribution Connectors withstand harsh environments.

May 20, 2016

Available in 3-, 4-, and 7-pole configurations, MINI Power Distribution Series offers plug-and-play solution for industrial motors, automated machine tools, and robotic systems. Industrial circular connectors provide quick disconnect option for applications that demand more power. Since series is completely modular, users can mix and match assorted parts on installation. Full line of accessories... Read More

Electrical Equipment & Systems

Circular Connectors offer industrial equivalent to MIL-Spec.

Apr 12, 2016

Featuring completely over-molded cord sets and pre-wired and epoxied panel mount receptacles, plug-and-play MIL-Spec Industrial 5015 Equivalent Connectors eliminate risk of incorrect wiring. Products are available in 4 shell sizes of 10SL, 14S, 16S, and 18, each offering variety of pin counts and configurations. Using threaded couplings to mate, IP67-rated connectors are suited for factory... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

Multipole Connector Panel Supports increase versatility, access.

Jan 19, 2016

COB (connector on board) series does not require metallic enclosures to use multipole connectors inside electric panels; protection is provided by electric panel itself. While interchangeability of connector inserts increases versatility, rear access to inserts via turnover device facilitates wiring inspection and tests with coupled connectors. Mobile parts are prearranged for clamping of... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Spring Terminal Rectangular Connectors have tool-free design.

Dec 09, 2015

Optimized for usability on manufacturing floors and in industrial environments, CSH Series (SQUICH) connectors provide quick-connect solutions for production machinery. Each spring terminal incorporates in-cavity actuator button that, when pressed, triggers closure of spring device of corresponding terminal to safely and reliably connect conductor to respective electric contact in connector.... Read More

Electrical Equipment & Systems

Waterproof Connectors withstand harsh environments.

Jul 21, 2015

Carrying protection ratings from IP44–IP68 connectors, waterproof connectors can be used in harsh manufacturing environments. IP67-rated versions provide complete protection against dust and ingress of water when immersed in 1 m of water for 30 min, while IP65-rated models provide complete protection against dust and protection regarding water jets from all directions. Read More

Electrical Equipment & Systems

Plastic Port Adapters carry full IP65 rating.

Jun 22, 2015

Featuring black plastic shell with M25 mounting thread, port adapters carry IP65 rating that ensures complete protection against dust and jets of water from all directions. Adapters are available with internally potted RJ45, USB Type A, or USB Type B connector and can be mounted to cabinet through 1 in. diameter hole. All products come with cap tethered to connecter via TPE... Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Electronic Components & Devices, Test & Measuring Instruments

DIN Rail Terminal Modules feature expandable design.

Jul 16, 2014

With T35 Series, users can mount wide variety of connectors to DIN rail. End users can take pre-molded connection, such as ribbon cable or D-Sub, and break it out to individual terminal points, while taking up minimal space on DIN rail. Interface modules feature cable locking mechanism and have designated area for identification labeling. Equipped with component holes, printed circuit... Read More

Electrical Equipment & Systems, Green & Clean, Mounting & Attaching Products

Armored Cables withstand harsh manufacturing environments.

Mar 20, 2014

Available in MDC(M12) connectors and MIN(7/8 inch) connectors, Armored Cables prevent downtime or outages caused by connection failure. Stainless steel coupling nut and stainless steel armor jacket prevent water damage from high-pressure washdown, cleaning chemicals, and extreme temperature. Silicone tube-covered jacket prevents physical failure by repetitive impacts and abrasion with loaded... Read More

Electrical Equipment & Systems, Electronic Components & Devices

ILME Connector Kits facilitate electrical connections.

Sep 06, 2013

ILME Heavy Duty Multipole Connector Kits provide components needed to bring together heavy-duty electrical connection. Each kit contains base and mating hood along with required, matching male and female inserts. Available options include 3- to 24-pole connectors, metric hood opening, and screw or tool-less spring (Squich) terminals. Rated IP66, ILME heavy-duty, rectangular connectors... Read More

Electrical Equipment & Systems

Locking Connectors feature NEMA 5-15P rating.

May 01, 2013

Available in 3 and 6 ft cable lengths, C13 Locking Connectors are suitable for situations that require continuous operation. Units feature 10 A/125 V rating, 18 AWG wire gauge, and black PVC jacket. Connectors can be used in data centers to help protect data, medical devices to control and monitor without accidental interruption, and industrial automation applications since they are unaffected... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Fasteners & Hardware, Mounting & Attaching Products

25-Pole Inserts work with heavy-duty rectangular connectors.

Jan 17, 2013

Used in applications where high volumes of data or signals are transmitted in small space, module CX-25 features 25 Pole MIXO Inserts by ILME. Modular inserts work with MIXO series frame, which lets end-user create custom connector, and can be used individually in single frame or combined with up to 5 other modules in 6-slot frame. Read More

Other Company News from
Mencom Corporation

Nov 04, 2011

x x.