Company News

ARPAC LLC

9511 W. River St., Schiller Park, IL, 60176, US

Share Like Tweet Add Email

Latest New Product News from
ARPAC

Packaging Equipment

Wraparound Case Packer processes 45 cases/trays per minute.

July 3, 2012

Suitable for metal and paper cans as well as plastic and glass jars and bottles, Performance-Series(TM) PC-4500 Continuous Motion Case Packer collates products, loads corrugated cases or trays, and closes them with hot-melt glue. System provides tight packages, minimizing need for partitions while protecting glass containers from damage. If needed, system options allow for automatic insertion of partitions, dividers, or pads for maximum product protection. Read More

Packaging Equipment

Rotary Tower Stretch Wrapper features floor-mounted design.

November 23, 2010

ELECTRO-WRAP SERIES® automatic rotary tower stretch wrapper requires no pneumatic hookup and can be loaded with fork truck or pallet jack. Activated with remote lanyard, it features film carriage that revolves around stationary pallet load and, once cycle is completed, system automatically clamps, cuts, and wipes film to pallet. Sensor stops rotating film carriage arm for safety, while swing arm drive system has slewing bearing design that requires minimal maintenance. Read More

Packaging Equipment

Automatic Pallet Stretch Wrapper operates in all environments.

July 13, 2010

POWER SERIES increases labor efficiency by allowing for entire wrap sequence to be completed without forklift operator getting off of truck. Upon completion of cycle, stretch wrapper automatically clamps, cuts, and secures film to pallet to prevent it from unraveling. Wraper features 72 in. dia turntable that protects film clamp from damage during loading/unloading and is completely portable when used with optional portable air compressor. Read More

Food Processing & Preparation, Packaging Equipment

Dairy Shrink Bundling System suits washdown environments.

July 24, 2009

Compact, right-angle shrink bundling system AGR-SERIES collates and over-wraps multiple arrangements of scrounds, rounds, squares, pints, quarts, cans, and other food containers in single or dual lane configuration. Single frame, heavy-duty stainless steel system has NEMA 4X electrical cabinets and controls, and is designed and built in compliance with FDA and food industry standards. Product transfer bridge and product hold down feature ensure smooth product transfer and stability. Read More

Packaging Equipment

Stretch Wrap System can handle up to 100 loads/hr.

October 30, 2008

Suited for high speed production lines, RTAC-4Q3 Rotary Arm Stretch Wrap System indexes, automatically wraps and discharges loads without operator assistance. It features touch screen Allen Bradley HMI, 6 ft tall fenced guarding, remote NEMA-12 electrical enclosure, and AC motors and controllers. Other features include heavy duty conveyors with 2.5 in. rollers, analog proximity switch dancer bar control, and 36 in. dia precision steel ring rotary arm support/drive system. Read More

Packaging Equipment

Pallet Covering Machine wraps 120 pallets/hour.

July 22, 2008

Providing 5-sided pallet coverage without top sheet, COVER-PAL 6000® Stretch Hood Pallet Covering System minimizes risk of environmental damage from dust and water. Brand messaging can be printed directly onto film, and transparent pallet cover enables labels to be read without removing film. Equipped with Allen Bradley® controls, machine is suited for indoor and outdoor products destined for storage in cost clubs, home centers, construction sites, and freight centers. Read More

Packaging Equipment, Machinery & Machining Tools

Pallet Stretch Wrapper operates in all environments.

March 25, 2008

Equipped with 72 in. dia turntable, conveyor-less, single-station PA Series allows entire wrap sequence to be completed without forklift operator getting off truck. Operator sets pallet onto turntable platform and activates wrapping cycle from remote pendant with emergency stop feature. Upon completion of cycle, system automatically clamps, cuts, and secures film to pallet to prevent it from unraveling. PA-Series is completely portable when used with portable air compressor. Read More

Packaging Equipment

Horizontal Shrink Wrapper handles 140 packages/min.

October 2, 2007

Suited for full film over-wrapped packages for retail display, side seal CAPRA(TM) 8000SS has 24 in. wide seal bar with up to 10 in. high seal bar opening, and can be adapted to run vertical end seals for tall packages. Machine can run single-wound polyethylene, polyolefin, or PVC shrink films and requires no tools for changeovers. Allen Bradley® touch screen controls, attached to swing arm, can be reached from either side of machine. Read More

Machinery & Machining Tools

Packaging System provides 5-sided pallet coverage.

September 6, 2007

Designed to minimize risk of damage from dust and water, COVER-PAL 6000® Stretch hood pallet covering system wraps pallets at speeds up to 140 pallet/hr. Transparent pallet cover enables labels to be read without removing film and enables brand messaging to be printed directly onto film. Providing 5-sided coverage without need for top sheet, COVER-PAL 6000® Stretch is suited for products stored in cost clubs, home centers, construction sites, and freight centers. Read More

Packaging Equipment

Stretch Wrapper provides 4,000 lb capacity.

April 11, 2007

Designed to maximize stretch film usage while ensuring load unitization, semi-automatic Pro-Series is available with high-profile turntable for forklift loading or low-profile turntable for pallet-jack loading. It can be customized with extended towers for taller loads and split frames for odd sized loads. System includes top over wrap control, cycle pause, photo-eye to see dark loads, and dual LED top and bottom wrap counters, each with range of 1-9 wraps. Read More

Packaging Equipment

Horizontal Shrink Wrapper processes 140 packages/min.

March 20, 2007

Operating at 140 linear fpm, continuous-motion CAPRA 8000LS features 24 in. wide end seal with 10 in. high end seal opening, and can also run vertical end seals. Machine uses bottom lap seal via fixed plow that leaves no excess film. Utilizing polyethylene, polyolefin, or PVC shrink film, wrapper can run large product sizes, as well as very small items. It comes with Allen Bradley® ControlLogix and PanelView touchscreen interface for automatic set-up of product recipes. Read More

Packaging Equipment

Stretch Wrapper has photo eye that sees dark loads.

January 26, 2006

With 4,000 lb capacity, INFRAPAK Pro-Series semi-automatic turntable pallet stretch wrapping system is available with high-profile turntable for forklift loading or low-profile turntable for pallet-jack loading. Ergonomic design incorporates chains enclosed in tower frame, dual LED top and bottom wrap counters with 1-9 wrap range, and top over wrap (TOC) control. Extended towers are available for taller loads, while split frames accommodate odd-sized loads. Read More

Packaging Equipment

Stretch Wrapper handles pallets with 4,000 lb capacity.

September 23, 2005

Combining weighing and wrapping into one operation, semi-automatic Sidewinder 4LP WRAP-N-WEIGH integrates precision scale and digital controls with turntable. It features anti-static pre-stretch rollers, steel-it paint to prevent corrosion, and electronically controlled film tension adjustment. Machine also includes Allen Bradley Micrologix PLC, 3-wrap pattern selections, self-diagnostics, and operator controls with dual LED wrap counters. Read More

Packaging Equipment

Shrink Wrappers suit printing/publishing industries.

September 23, 2005

At speeds up to 40 packages/min, Hanagata Z-Series intermittent motion automatic L-sealer features text-driven control panel, pinch roller, and guillotine-style seal head. It produces fully enclosed shrink-wrapped packages and features quick changeovers via hand crank adjustments. Vision Series shrink tunnel utilizes convection-style heating system for uniform shrink. Along with double insulation, it features viewing window and illuminated shrink chamber. Read More

Packaging Equipment

Shrink Bundler meets high-volume printing industry needs.

September 16, 2005

Operating at speeds to 75 bundles/min, ARPAC 75GI shrink wraps random size bundles, short stacks, and lightweight products on-demand without interrupting production within printing and publishing industry. It features servo-driven sealing with precision electronic control and is designed to interact with 18,000-20,000 books/hr binding lines. Suited for use with counter stackers, seal height can be electronically programmed to vary with product height. Read More

Packaging Equipment

Shrink Wrapper operates at speeds to 25 trays/min.

June 29, 2005

Model 25TW-28 wraps unitized or trayed boxes, cans, and bottles in single-tier or stacked arrangement. Able to handle trayed product from ½-13 in. high, 6-18 in. wide, and 6-20 in. long, intermittent-motion tray wrapper has side-mounted film racks with film splicing bars. Operator interface recalls parameters for up to 16 products, while automatic setup calculates machine settings based upon product dimensions. Turbo cooling evenly cools product. Read More

Packaging Equipment

Tray Wrapper operates at up to 25 trays/min.

June 23, 2005

Intermittent-motion Model 25TW-28 wraps unitized or trayed boxes, cans, and bottles in single-tier or stacked arrangement. Machine handles trayed products from ½-13 in. high, 6-18 in. wide, and 6-20 in. long. Operator interface recalls parameters for up to 16 different products, while automatic setup calculates machine settings based upon product dimensions. Side mounted film racks, with film splicing bars, facilitate film roll replacement and changeover. Read More

Packaging Equipment

Shrink Bundler is suited for pharmaceutical industry.

June 17, 2005

Offered with variety of standard and customized infeeds, 708HB intermittent motion, right-angle stainless-steel shrink bundler features multi-row collation capabilities that enable it to shrink wrap products in various multi-pack configurations. Model 708HB-16 utilizes motorized pulley drive system with brushless dc motors and operates at speeds to 30 bundles/min. System is designed for pharmaceutical, health, and beauty industries. Read More

Packaging Equipment

Shrink Wrapper offers flexibility and quick changeovers.

April 20, 2005

Equipped with Allen Bradley SLC 5/03 PLC and color LCD programmable touch-screen, Model TS37 handles single-wound PVC, polyethylene, and polyolefin films up to 39 in. wide. It features interchangeable horizontal and vertical sealing as well as adjustable film inverter that eliminates need for multiple forming heads or centerfold film. Keeping package graphics distortion free, trim seal unit allows on-the-fly adjustments without machine shut-down. Read More

Packaging Equipment, Materials & Material Processing

Tray Shrink Wrappers have print registered film feature.

January 31, 2005

Dual roll models 25TW (intermittent motion) and 45TW (continuous motion) provide alternative to single roll print registered tray wrapping. They enable existing and new ARPAC tray shrink wrappers to run print registered films on top film of package. Systems will wrap any unitized or tray-packed product, including random pack sizes. Graphics on trays can be seen through clear film, while print registered film on top blocks individual product label UPCs. Read More

Other Company News from
ARPAC

November 15, 2010

MCE 3400 Case Former

January 12, 2010

Introducing ARPAC'S SCHURPAC