Products in the News

Controls & Controllers

Motion Control Solutions for Any Mission, for Any Environment

May 2, 2016

Ultra-High Current, Ultra Rugged, Ultra Small Servo Drives Meet us at XPONENTIAL 2016, New-Orleans 3-5 May, 2016, Booth #537 Elmo Motion Control USA, Nashua, New Hampshire, USA - a leading provider of advanced and cost-effective motion control solutions, will introduce its new world-class motion controller and exhibit a variety of servo drives with advanced networking and high intelligence... Read More

Automatic ID, Test & Measuring Instruments

Upgraded SIMBA Mobile Tablet Provides Improved Traceability for Seafood Processors

May 2, 2016

Redmond - WA - Dynamic Systems, Inc., a Redmond, Washington software developer specializing in barcode data collection systems has announced an upgraded tablet application for the SIMBA Line of Traceability Systems which is designed to provide food processors the ability to handle, label and track their products faster and more accurately from “dock to customer”. Increase production speed... Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

New Yorker Electronics Features Vishay UVA and UVB Light Sensor with I²C Interface

May 2, 2016

NORTHVALE, NEW JERSEY – New Yorker Electronics is now distributing Vishay’s VEML6075 UVA/UVB Light Sensor, a Vishay Super 12 Product for 2016. The VEML6075 senses UVA and UVB light and incorporates photodiode, amplifiers and analog/digital circuits into a single chip using a CMOS process. When the UV sensor is applied, it is able to detect UVA and UVB intensity to provide a measure of the... Read More

Architectural and Civil Engineering Products

Upgrading Multiple Pump Stations for New Jersey Township

May 2, 2016

Midland, Va. - Easi-Set Worldwide, a subsidiary of the Smith-Midland Corporation (DE) (OTCQX: SMID) project update. Western Monmouth Utilities Authority in Manalapan, N.J., operates more than 30 pump stations, servicing over 79,000 customers. With stations surpassing 40 years old, it was time to make them more efficient, aesthetically appealing and safe. Five of the stations recently were... Read More

Laboratory and Research Supplies & Equipment, Mechanical Power Transmission, Mounting & Attaching Products, Safety & Security Equipment

Trident LC Column Protection System Redesigned for Ruggedness and Ease of Use

May 2, 2016

BELLEFONTE, PA – Unlike “one size fits all” guard systems, the Trident LC column protection system gives you the power to select the right level of protection for your analysis (filter only, guard cartridge only, or filter and guard cartridge). With three levels of protection and a variety of guard cartridges and cap frits, you can select the best combination to match your specific... Read More

Computer Hardware & Peripherals, Non-Industrial Products

San Jose Police Department Once Again Chooses Getac B300 Ultra Rugged Notebooks to Refresh Fleet

May 2, 2016

Rugged Notebooks Proven to Reduce Downtime, Maintenance Costs and Improve Productivity IRVINE, CA. – The San Jose Police Department (SJPD) has ordered an additional 400 Getac B300 G5 ultra rugged notebook computers to replenish its fleet of squad cars, after first purchasing in 2009. They chose the Getac B300 again because it has consistently reduced equipment downtime and maintenance... Read More

Optics & Photonics, Test & Measuring Instruments, Vision Systems

Mahr Federal to Feature MarVision MM 320 and MarVision QM 300 Video Measuring Microscopes with Image Processing at MD&M EAST 2016

May 2, 2016

Also on display will be the MarShaft™ SCOPE 250 plus flexible optical system for shop floor measurement PROVIDENCE, RI – Mahr Federal will feature the MarVision MM 320 and the MarVision QM 300 video measuring microscopes with image processing capability at MDM EAST, June 14-16, 2016, Jacob K. Javits Convention Center, New York, NY, Booth #2121. Designed for the measurement and/or... Read More

Material Handling & Storage

Manitou Americas Welcomes Toyota Material Handling Ohio, Inc. to the Manitou Dealer Network

May 2, 2016

• Toyota Material Handling Ohio, Inc. has been in business since 1978 (38 years) • Toyota Material Handling Ohio, Inc. locations serving Columbus and Toledo, Ohio will represent Manitou rough terrain vertical masted forklifts and semi industrial vertical masted forklifts WEST BEND, WISCONSIN - Manitou, the world leader in all-terrain material handling equipment, is pleased to welcome... Read More

Services

Accuray Submits 510(k) Premarket Notification to FDA for its Radixact(TM) Treatment Delivery System

May 2, 2016

SUNNYVALE, Calif. - Accuray Incorporated (NASDAQ: ARAY) announced today the submission of its 510(k) premarket notification with the Food and Drug Administration (FDA) for the company's Radixact™ Treatment Delivery System. Accuray also submitted 510(k) premarket notification for its treatment planning and data management systems, Precision™ Treatment Planning System and iDMS™ Data... Read More

Chemical Processing & Waste Management, Electrical Equipment & Systems, Materials & Material Processing, Green & Clean

JinkoSolar 1500-Volt Eagle Modules Available for Delivery in North America Following UL 1703 Certification

May 2, 2016

SHANGHAI and WILMINGTON, Del. - JinkoSolar Holding Co., Ltd. ("JinkoSolar"), a global leader in the photovoltaic (PV) industry, today announced that its 1500-volt Eagle PV modules, manufactured with its strategic partner DuPont's™ Tedlar® polyvinyl fluoride (PVF) film-based backsheets, have received UL1703 certification by Underwriters Laboratories (UL). Following certification, the... Read More

Materials & Material Processing, Green & Clean

Toray Plastics (America) Receives Sustainability Award for Lumilid® Bio-Based Lidding Film Technology

May 2, 2016

North Kingstown, Rhode Island - Toray Plastics (America), Inc.'s (www.toraytpa.com), LumiLid® bio-based PET dual-ovenable lidding films have earned the 2016 Sustainability Award from the Association of International Metallizers, Coaters, and Laminators (AIMCAL). Milan Moscaritolo, Senior Director of Sales and Marketing for Toray's Lumirror®... Read More

Electronic Components & Devices, Mechanical Components & Assemblies

Autotalks License and Deploy CEVA DSP for Mass-Market V2X Chipset

May 2, 2016

CEVA-XC DSP powers Autotalks’ second-generation V2X communications solution supporting concurrent IEEE802.11p and IEEE802.11a/b/g/n/ac operation MOUNTAIN VIEW, Calif and KFAR NETTER, Israel. - CEVA, Inc. (NASDAQ: CEVA), the leading licensor of signal processing IP for smarter, connected devices, and Autotalks Ltd., the world’s leading provider of integrated V2X chipsets, today announced... Read More

Optics & Photonics, Robotics, Vision Systems

Texas Tech University Selects Vision Research for High-Speed Combustion Imaging Research

May 2, 2016

Engineering students at Texas Tech University’s Whitacre College of Engineering will soon have some new insights when it comes to studying combustion. The University recently purchased a Vision Research Phantom V2512 ultrahigh-speed camera with the goal of enhancing the way students analyze the combustion properties of solid fuels such as aluminum and boron.   Dr. Michelle Pantoya, the... Read More

Electrical Equipment & Systems, Green & Clean

SCEPTRE POWER ® Announces Energy Efficiency Level VI Power Supplies

May 2, 2016

Placentia, CA - Sceptre Power announces the compliance with Energy Efficiency Level VI on its PS, PSD, P2SD, PXX PXT series power supplies. The Energy Efficiency Level VI will go into effect on February 10, 2016, which requires no-load power not to exceed 0.1W for external power supplies ranging from 5W to 40W, and no-load power not to exceed 0.21W for external power supplies ranging from 40W... Read More

Test & Measuring Instruments

ASC International Offering Live 3D SPI Demos at ACI Technologies' Tech Expo

April 29, 2016

MEDINA, MINNESOTA - ASC International, a leading manufacturer of 3-D solder paste inspection (SPI) and automated optical inspection (AOI) systems, today announced that it will participate in ACI Technologies’ Third Annual Tech Expo, scheduled to take place April 27-28th at its facility in Philadelphia, Pa.  ASC International will offer live demonstrations of the VisionPro M500 during the Tech... Read More

Chemical Processing & Waste Management, Materials & Material Processing

3D Printing: Ultem® PEI

April 29, 2016

Ultem®/PEI (polyetherimide) has struck the 3D printing world as a high performance material for 3D printing beds. Ultem®/PEI film enables 3D printing enthusiasts to produce both ABS and PLA prints. This film offers extreme heat resistance, coupled with high mechanical strength, stiffness, UV stability, and broad chemical resistance. Ultem® allows 3D prints to be held firmly in place at high... Read More

Transportation Industry Products

Straton Industries Selected to Support Mars 2020 Rover Project

April 29, 2016

STRATFORD, CT – Straton Industries has been selected by Jet Propulsion Labs (JPL) in Pasadena, CA to supply custom parts for the Mars 2020 Rover Project. The Mars 2020 rover for this mission would be based on the Mars Science Laboratory‘s Curiosity rover configuration. It would be car-sized, about 10 feet long (not including the arm), 9 feet wide, and 7 feet tall (about 3 meters long, 2.7... Read More

Electrical Equipment & Systems, Green & Clean

TMEIC to Supply New 1500V Solar Ware® Samurai Inverters for 30MW U.S. Project

April 29, 2016

ROANOKE, Va., – Toshiba Mitsubishi-Electric Industrial Systems Corporation (TMEIC) announces its first order of the newest inverters in the Solar Ware® Samurai Series from juwi Inc. juwi's Bison Solar 30MW project in Wellington, Colorado includes 12 units of the Samurai Series 1500Vdc, 2700kW / 2700kVA inverters. The 225-acre site located in Northern Colorado will provide energy... Read More

Materials & Material Processing

Rotuba's Global Profile Business Thrives with Davis-Standard Super Blue® Extruders

April 29, 2016

(Pawcatuck, Conn.) - Profitability in the extrusion business largely depends on finding the right equipment. For Rotuba Extruders, Inc. of Linden, N.J., the right piece of equipment has been Davis-Standard’s Super Blue®Read More

Services

UNISIG to Highlight Multi-Process Deep-Hole Drilling System at AmeriMold 2016

April 29, 2016

MENOMONEE FALLS, Wis., - UNISIG will showcase its USC-M series of 7-axis deep-hole drilling and machining centers in booth 309 at Amerimold 2016 at the Suburban Collection Showplace in Novi, Michigan on June 15-16. These machines improve productivity and throughput by integrating critical mold manufacturing operations into one machine for efficient processing of large and small four-sided parts... Read More