NewPage Corp.
Dayton, OH 45463
Feb 09, 2010 Designed for printing pressure sensitive labels, OptiPrime(TM) Digital is pre-optimized, allowing converters to skip digital print surface pretreatments. Product features smooth semi-gloss finish and high strength for die-cutting and matrix stripping during label converting. OptiPrime Digital is available as tri-certified grade, indicating chain-of-custody certification by three third-party organizations including FSC, SFI, and PEFC schemes.

Rytec Corp.
Jackson, WI 53037
Feb 09, 2010 With peak speed of 182 ips, Turbo-Seal® Insulated Door maintains critical temperatures while optimizing productivity of traffic. Door has 1 in. thick, closed-cell foam, Rilon Thermal panel that is non-porous and moisture-proof. Quad Seals(TM) in side columns and integrated thermal breaks in doorframe minimize air infiltration and heat conduction. Combination of thermal performance and sealing technology enables door to operate virtually frost-free without heating elements.

Automated Control Engineering
Cardiff   Australia
Feb 09, 2010 Available in single- and dual-axis versions, ASM's POSITILT® PTAM20 series uses MEMS technology and is suited for OEM applications. Measurement range is ±15° to ±180° in increments of 15° for single-axis version and 15° to ±60° in increments of 15° for dual-axis version. Along with 0.05° resolution and up to ±0.5° linearity, series is available with various analog output types. Each version also carries IP60 rating and offers shock resistance.

Aeroflex
Irvine, CA 92618
Feb 09, 2010 Functionality of TM500 DC-HSDPA Multi-UE Test Mobile supports multiple user equipment emulation in conjunction with measurements for 3GPP W-CDMA Release 8 DC-HSDPA (Dual Cell High-Speed Download Packet Access) standard. With this solution, base station and core network designs can be load tested, stressed, and optimized. This enables 3G infrastructure equipment manufacturers to test to accelerate development as well as deployment in networks.

Vaccon Co., Inc.
Medfield, MA 02052
Feb 09, 2010 Modified material transfer pumps move various types of wrapped materials from one place to another without unwrapping or unraveling. Powered by compressed air, they offer instantaneous vacuum flow and high air velocity, allowing material to pass through at high speeds without interference. Pumps are available in anodized aluminum in 16 standard sizes, with internal diameters from 1/8-4 in., and vacuum flow rates from 3-375 scfm.

Vaccon Co., Inc.
Medfield, MA 02052
Feb 09, 2010 Ultra-miniature, air-powered venturi vacuum pump is suited for drip control in liquid dispensing or liquid transfer applications. Durable pump measures 1.25 in. long and features .56 in. OD with no moving parts. It is designed to operate at input pressures as low as 10 psi and generates vacuum levels from 5-27 in. Hg with maximum 0.45 scfm. Durable pumps can be manufactured in variety of materials for adverse operating conditions.

Computer Aided Solutions, LLC
Chesterland, OH 44026
Feb 09, 2010 With 0-600 Arms input range, battery-powered, 1-channel Model CL601 records TRMS current at rate up to 8 times/sec with TRMS calculations performed on single line cycle. Power line frequency tracking is performed such that 64 samples over one line cycle are taken. When connected to PC, real-time harmonic measurements are calculated from these 64 samples. Self-contained, clamp-on logger includes overload indication, alarm function, and optically isolated USB 2.0 communication.

Tumbler Technologies, Inc.
Santa Clara, CA 95054
Feb 09, 2010 Featuring class I and class II insulation, TMP180 Series AC/DC Desktop Power Adapters offer single output voltages of 19, 24, or 28 V with continuous output power up to 180 W. Units have 90-264 Vac continuous input range with 0.95 power factor and withstand voltage of 2,000 Vac from input to output. With standby power consumption lower than 0.5 W and efficiency higher than 87%, RoHS-compliant units are in compliance with CEC and Energy Star efficiency level V requirements.

TURCK, Inc.
Plymouth, MN 55441
Feb 09, 2010 Designed for extreme outdoor applications, Sendix M3658 shaft and M3678 hollow shaft encoders feature Sensor Protect(TM) technology, which incorporates fully encapsulated electronics and separate mechanical bearing assembly, providing IP69K rating for housing and flange. Interlocking bearing design utilizes Safety-Lockplus(TM) technology that mechanically protects shaft seal. With resolution up to 14 bits, magnetic single-turn encoders offer non-contact, wear-resistant measuring system.

Almco, Inc.
Albert Lea, MN 56007 2751
Feb 09, 2010 Featuring all stainless steel design, Model PWRBD24-96E-U includes wash, rinse, second rinse, blow-off, and drying functions in space-saving U-bend design. Variable-speed, 24 in. continuous belt feeds parts through all functional chambers and delivers them to end of system. Designed to remove oil and grease, system has multiple nozzles on 96 in. wash section that are adjustable for direction onto parts and into places where special attention is required.

Saelig Co., Inc.
Pittsford, NY 14534
Feb 09, 2010 QuickUSB is 2 x 1 in. circuit board that implements bus-powered high-speed USB 2.0 endpoint terminating in one 80-pin target interface connector. With companion QuickUSB Customizer software, end-users can tailor QuickUSB Module with user-defined My Product string descriptor, unique PID, and user-defined serial number. Included firmware, device drivers, and software work with Windows and Linux, and board supports range of I/O types.

Teseq, Inc.
Edison, NJ 08837
Feb 09, 2010 Model CDN 3063 automated 3-phase coupling/decoupling network for EFT and surge testing offers range of test setups, including high current level and 3-phase EUT testing. Device includes over-temperature protection and phase rotation indicator that shows correctly sequenced power connection. It couples burst and surge pulses in 1-, 2-, or 3-phase power mains up to 480 V with current range up to 32 A. Burst only, surge function only, and combination versions are available.

Atlona Technologies
San Jose, CA 95131
Feb 09, 2010 Controlled via IR back channel, RS232, IR remote, or LAN control, Model AT-VGA88M-SR features 8 VGA inputs with Stereo Audio and 8 Twisted Pair CAT5/6 outputs to feed 8 displays simultaneously. Twisted Pair outputs connect to 8 included receiver modules to send VGA signal up to 1,000 ft over CAT5/6 cable. With switcher, users can access computers, set top boxes, and satellite receivers directly, from location of displays such as HDTVs, LCDs, plasma monitors, and video projectors.

Men Micro Inc.
Lago Vista, TX 78645-4160
Feb 09, 2010 Capable of operating across -40 to +185°F range, F11S supports 45 nm-based Intel® Atom(TM) XL CPUs that offer 7 W max power dissipation at speeds up to 1.6 GHz. Front I/O includes COM interface via D-Sub connector, 2 USB 2.0 ports, graphics via VGA or UXGA, and PS/2 interface for keyboard or mouse. Connectivity is fostered with Gigabit Ethernet slot via PCIe x1 and FPGA-based Fast Ethernet slot on RJ45 connectors. Onboard FPGA also allows for application-specific interfaces.

Wittenstein, Inc. (formerly Alpha Gear Drives, Inc.)
Bartlett, IL 60103
Feb 09, 2010 Providing linear and rotary motion solutions, Ternary Actuator is available with options that can be mixed-and-matched to suit application demands. Ethernet/IP control interface supports 10/100 MB communication, and analog position control interface offers 0-10 Vdc or 4-20 mA input. Rated to IP40, actuators are available as 200 and 400 W rotary servo versions with all standard Fieldbus interfaces, 110 or 220 Vac direct power input, and 100 mm frame size motor.

AutomationDirect.com
Cumming, GA 30040-9905
Feb 09, 2010 Available in 2 models, RUKO Hole Saws range in size from 9/16-8¼ in. High-Speed Steel saws cut unalloyed steel, non-ferrous and light metals, plastics, plasterboard, fiberboard, plywood, and wood. Cobalt 8 saws, with fine cutting teeth, cut alloyed and non-alloyed steels, high chromium alloyed steels, steels resistant to rust and acids, non-ferrous and light metals. Constructed with alloyed steel 6135 jacket, saws feature rotational precision as well as positive chipping and cutting angles.

Permabond
Somerset, NJ 08873
Feb 09, 2010 Along with bonding strength that exeeds that strength of plastics and compsites, solvent- and stress-resistant Permabond TA4810/TA4820 can bond variety of metals and other substrates. Both 2-component, 1:1 mixable, methacrylate-based products exhibit thixotropic, non-sag, properties that facilitate dispensing on unlevel or vertical surfaces. Permabond TA4810 achieves fixture strength in as little as 10 min, while Permabond TA4820 reaches fixture strength in 30 min.

LEDtronics, Inc.
Torrance, CA 90505
Feb 09, 2010 Designed to replace 64 and 80 W fluorescent fixtures, respectively, 24 W CLL2X2-400-TPW-001W and 36 W CLL2X2-800-TPW-001W deliver solid-state 5,000 K pure-white lighting with beam intensities of 1,840 and 2,753 lumens. They feature 22 ga, cold-rolled steel housing with baked white-polyester finish and clear prismatic acrylic lens in 20 ga steel frame with T-hinge and positive spring-loaded latch. RoHS compliant units offer life of over 50,000 hr and operate in -22 to +104°F temperatures.

AMETEK Test & Calibration Instruments
Largo, FL 33773
Feb 09, 2010 JOFRA® HPC 600 works as pressure indicator, pressure calibrator, complete mA loop calibrator (including 24 V), voltmeter, thermometer, and pressure/vacuum generator. Features include user configurable information display, 15 different pressure units, transmitter supply, mA input/output, % error calculation, serial communications, and external pressure module capability. Each unit is temperature compensated from 14-122°F, and international traceable calibration certificate comes standard.

Aqua Based Technologies, a division of ADM Tronics, Inc.
Northvale, NJ 07647
Feb 09, 2010 Formulated from FDA approved ingredients for direct food contact, high OGR (oil and grease resistant) Aqualene® 5001 contains zero VOCs and is designed for paper converting and packaging industry. Water-based coating is repulpable, biodegradable, and environmentally safe. Product can be used for coating microwave popcorn bags, food wrappers, paper cups, ice cream boxes, or any food packaging product which requires high OGR properties.