Wrench automatically adjusts to nut and bolt size.
Bionic Wrench(TM) employs 6 steel jaws that simultaneously converge on sides of nut or bolt, automatically sizing and gripping U.S.- and metric-sized nuts and bolts without slipping or rounding corners. Hand tool distributes equal force on all sides of fasteners and has cushioned, ergonomic handle. Covering 38 SAE and metric wrench sizes from -¼-1-¼ in. or 7-30 mm, product is offered in 6, 8,...
Read More »Corded Impact Wrench produces 450 lb-ft torque.
Utilizing 7.5 A, 850 W motor, -¾ in. Model WR22SA generates 1,800 rpm and 2,000 ipm impact rate. Armature bearing is seated in aluminum to withstand high heat and stress from extreme use. Internal double insulation technology enables aluminum housing to be intertwined with injection molded inner nylon core. Soft elastomer compound covering absorbs vibration and provides slip-resistant grip,...
Read More »Ratcheting Wrench is suited for automotive industry.
Featuring all-metal construction with solid metal core, 3/8 in. drive Ratcheting UniDriver-® can be set to 3 positions: ratchet clockwise, ratchet counter-clockwise, or neutral. Design is alternated, forward and back, to optimize turning output. When set in neutral, unit can be used with t-bar or ratchet wrench plugged into top. Product can loosen or tighten attachments with no danger of dropped...
Read More »
Impact Wrench features 1 in. square drive.
Ergonomically designed TW1000 provides up to 738 lb-ft torque and has no-load speed of 1,400 rpm. It incorporates rocker type forward and reverse switch for one-handed operation. Rated at 12.0 A, unit has 3 1/8 in. hammer that provides impact power of 1,500 impacts/min and takes 3 sec to seat 1 3/16 in. bolt. Along with externally accessible brushes and ball bearings, unit features protective...
Read More »
Key Considerations When Choosing the Right Medical Device Development Experts: From Concept to Market
This eBook covers various factors to consider when selecting a medical device development partner to ensure proper guidance from concept to launch.
Read More »Impact Wrench features ergonomic design.
Covered in soft elastomer compound that absorbs vibration and provides slip-resistant grip, -½ in. WR16SA is constructed with aluminum housing intertwined with injection molded inner nylon core. Armature bearing is seated in aluminum to withstand heat and stress resulting from extreme use. Weighing 6.17 lb, this 10.15 in. long tool uses 4.2 A, 480 W motor to produce up to 3,190 lb-in. torque and...
Read More »
Impact Wrench delivers up to 1,300 blows per minute.
Snap-on-® XT7100, -½ in. Magnesium Impact Wrench combines one-piece magnesium housing, continuous internal oil bath, and cushioned, non-slip trigger and grip. Biased tip valve design promotes air flow to dual chamber motor for immediate start-ups upon trigger activation, while Anvil Stop Lock on impact immediately halts anvil when trigger is released. Motor and twin hammer impact mechanism...
Read More »
Impact Wrench has one-piece, magnesium housing.
Suited for vehicle technicians, 3/8 in. MG31 aids in removing lug nuts, loosening tie rod ends, and securing other fasteners. Construction incorporates balanced design with slim nose, cushioned trigger, anvil stop lock, and metal reverse and power controls. Weighing 2.9 lb, unit features internal twin hammer mechanism that delivers 300 lb-ft torque at impact. Unit is powered by low-vibration,...
Read More »Impact Drivers/Wrenches have cordless, balanced design.
DMR series includes 9.6 V (WH9DMR, WR9DMR), 12 V (WH12DMR, WR12DMR), 14.4 V (WH14DMR, WR14DMR), and 18 V (WH18DMR, WR18DMR) impact drivers and impact wrenches. Along with 2-piece motor with copper coils, series incorporates integral Cool Flow system that minimizes risk of motor burnout. Series produces 930-1,950 lb-in., depending on model, and has electronic feedback power control switch that...
Read More »
Ratcheting Wrenches fit in tight spaces.
Blackhawk(TM) by Proto-® Wrenches feature ratcheting box end that lets user apply or remove fasteners without having to continually remove and replace wrench. Fine-toothed gears provide smooth ratcheting, while thin box heads, slim shanks, and short arc swings allow use in tight spaces. Users can choose from fractional, metric, and Torx-® models, as well as standard, jumbo, and stubby-length...
Read More »
Adjustable Wrench handles multiple-sized nuts and bolts.
Adjustable Wrench features tight thumbscrew tolerance that will not loosen or wobble while being used. Jaw opens smoothly with laser etched markings guiding user to exact inch or millimeter measurements. Ten-inch version opens full 1 7/16 in. while 8 in. model opens 1-¼ in. Ergonomic, polymer handle is gentle on hand muscles and form-fits to each user's grip. Head is drop forged alloy steel with...
Read More »
Neagle Choice, LLC Announces New Available Services
Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.
Read More »
