Workholding Systems

Kurt Workholding to Introduce New 5-Axis Vises and Expanded Line of Small Machine Table Workholding at IMTS 2016 Booth #W-2423

Kurt Workholding to Introduce New 5-Axis Vises and Expanded Line of Small Machine Table Workholding at IMTS 2016 Booth #W-2423

Minneapolis, Minnesota: Kurt IMTS 2016 exhibit will feature new expanded DoveLock™ 5-axis workholding line including two new models.-  Also featured at IMTS, the Kurt exhibit will include the comprehensive small machine table lineup of 20 options for machine tables measuring 16 inches and under in the Y-dimension. Kurt DoveLock dovetail 5-Axis vise line is expanded with a new reverse model and...

Read More »
Hybrid Trunnions reduces setup and increase productivity.

Hybrid Trunnions reduces setup and increase productivity.

Stallion Hybrid trunnions accelerate installation of 3- and 4-jaw chucks, collet chucks, and faceplates without requiring removal of trunnion table. While 9 x 20 in.- model holds 6 in. vise, 9 x 23 in.- model is designed for double- or single-station, 6 in. vises. Sub-plates and quick-change sub-plates are available with quick-change ballocks, standard baseplates allow trunnion assembly to be...

Read More »

CARVEsmart(TM) and Mitee-Bite Products Team Up to Offer Ultimate Workholding Solution

Cottage Grove, Minn. - CARVEsmart™, a division of Bellatex Industries and maker of the original quick-change vise jaw system featuring dovetailed jaw technology, is teaming up with Mitee-Bite Products LLC., to offer a unique low profile workholding solution for vise jaw applications. CARVEsmart has developed Mitee-Bite-authorized TalonTop dovetailed jaws which are TalonGrip™ ready. The...

Read More »
Hybrid Trunnions eliminate need to remove trunnion table.

Hybrid Trunnions eliminate need to remove trunnion table.

Engineered to bolt on to any machine’s rotary indexer, Stallion Hybrid Trunnions allow- 3- and 4-jaw chucks, collet chucks, and faceplates to be installed without removal of trunnion table. Stallion Hybrid 9/20 (9 x 20 in.) is designed to hold 6 in. vise, while 9/23 (9 x 23 in.) is intended for double or single station 6 in. vises.- Pneumatic brake, built into outboard support, provides up to...

Read More »

Need Innovative Solutions to Cut Manufacturing Costs? Look No Further than the mPower Workholding Booth at Houstex Show from Feb 26-28

Erie, Pa- – At Modern Industries, we've experienced the frustration that comes with inefficient workholding technologies; we were certain that better methods could be developed to compress set-up times, expedite fixturing changes and improve throughput. After many years of trial and error, we launched the mPower product line in order to offer dynamic workholding solutions that can help...

Read More »
Kurt Features Its Newest Workholding Devices at EASTEC 2013, West Springfield, MA - Booth 5130

Kurt Features Its Newest Workholding Devices at EASTEC 2013, West Springfield, MA - Booth 5130

Minneapolis, Minnesota: Kurt's expanded lineup of advanced workholding products for improved machining productivity will be featured at EASTEC 2013 Booth 5130, May 14-16th. New Kurt SideWinder(TM) For Second Operation Machining Kurt's New SideWinder(TM) Vise provides vertical workholding for second operation machining in the same setup by easily mounting to the back of all Kurt industry standard...

Read More »

Kitagawa-NorthTech Expands Workholding Productivity Offerings

Kitagawa-NorthTech, Inc. added to their product line the BBT200 series, a two jaw version of the BB200, to help customers achieve increased productivity and reduced costs. Schaumburg, IL - Kitagawa-NorthTech, Inc. has added the BBT200 series, a two jaw version of the BB200, to their family of products. The BBT200 series solution has been needed for a long time to properly integrate from a BB200...

Read More »
Workholding Chuck has drawbar activated design.

Workholding Chuck has drawbar activated design.

Along with centered pilot for optimized accuracy and repeatability, 4 in. dia drawbar-actuated, pull-down chuck features spring-loaded funnel-shaped base that goes into chuck body with zero clearance sliding fit. Operator pushes part down into funnel, and 2 spring-loaded ball plungers hold part in place. Precision centering power air and diaphragm chucks are available for lathe and milling...

Read More »
High-Pressure Vise offer variable jaw and gripper clamping.

High-Pressure Vise offer variable jaw and gripper clamping.

Built on GGG 60 base with hardened and ground guideways, ALLMATIC TITAN 125 employs fully enclosed, maintenance-free, high-pressure spindle equipped with wear-resistant mechanical power intensifier. Workpieces can be changed in seconds, and torque wrench, adjustable from 6-30 Nm, is used for defined clamping. Side openings allow chips and cooling lubricant to escape, threaded holes on both sides...

Read More »

Parlec to Showcase its Innovative Technologies and Products at WESTEC 2008

Rochester, NY, January 28, 2008 - Parlec, Inc., a worldwide leader in tooling, workholding, and presetting solutions, announced it will exhibit its presetting, high-speed tooling, workholding, and driven and static solutions at WESTEC 2008 Exposition and Conference in Los Angeles, California, March 31 - April 3, 2008, Booth 2963. Parlec will showcase its Series 1500 Parsetter TMM-®, the latest...

Read More »

All Topics