Workbenches

Magnaflux Launches Universal WE Wet Bench with Automatic Sequencing Mode
Workbenches

Magnaflux Launches Universal WE Wet Bench with Automatic Sequencing Mode

Magnaflux’s Universal WE Wet Bench is designed to magnetize the surface of parts of up to 35 in. length. Unit can be programmed to automatically clamp, bathe, magnetize and demagnetize the part. The bench comes with coil-less, multi-directional shot capabilities that reduces the inspection time. Universal WE can be configured with overhead surface shower system that performs bathing of the...

Read More »
WORX Sidekick Folding Worktable comes with load capacity up to 300lbs.
Workbenches

WORX Sidekick Folding Worktable comes with load capacity up to 300lbs.

WORX Workstations consist of sidekick folding, pegasus folding, sawhorse and clamping sawhorse worktables. WORX Sidekick Folding version weighs 13 lbs and offers 23.6 in. x 23.6 in. work surface. This variant is suitable for food prep grilling station, concert picnic table, craft, hobby station, board game table top applications. The worktable features honeycomb construction and comes with...

Read More »
Manual Wet Processing Bench
Workbenches

Manual Wet Processing Bench

Fullerton, CA – Terra Universal features non-automated wet processing benches, designed for smaller-throughput integrated circuit or solar cell manufacturing facilities. They are an economical alternative to larger stations equipped with robots. Manual silicon wafer benches are built to comply with OSHA and NFPA standards, and have standard safety features such as an emergency power switch, PVC...

Read More »
BioSafe Dual-Level Gowning Bench include a seat with footrest.
Workbenches

BioSafe Dual-Level Gowning Bench include a seat with footrest.

Used for donning cleanroom coveralls, booties and other garb, BioSafe Dual-Level Gowning Bench is fabricated using square-tube electropolished stainless steel that meet ISO 3 standards. Connecting holes facilitate back-to-back attachment and also enables user to manipulate their placement according to protocol, thereby demarcating "clean" and "dirty" zones. Welded with continuous seams, benches...

Read More »
Custom Steel Heavy Duty Shop Tables for Tampa Conveyor Parts Supplier
Workbenches

Custom Steel Heavy Duty Shop Tables for Tampa Conveyor Parts Supplier

On May 5, 2016, Keller-Angelillis completed two (2) each custom steel heavy duty tables for Epperson Co. in Tampa, FL. Epperson & Co.-  was experiencing an increase in demand for their in-shop services.  They called upon Keller-Angelillis to custom fabricate their request for two new custom steel heavy duty work tables.  The two rectangular tables were made out of mild steel rectangular...

Read More »
Height Adjustable System offers sit-and-stand capability.
Workbenches

Height Adjustable System offers sit-and-stand capability.

Consisting of electro-mechanical adjustable height lift system, SL Series is suited for assembly tables, workbenches, desks, or anywhere sit and stand height adjustability is desired.- Two-piece adjustable legs nest within each other and extend or retract as motor turns internal ball screw. Offering synchronous control of 1, 2, or 3 legs, system features lifting speed of .47 in./sec, lift...

Read More »
High-Speed Flatness Inspection to Within One Micron
Workbenches

High-Speed Flatness Inspection to Within One Micron

Duhamel DTI has designed a bench for testing the magnetic circuits of electrical contactors that uses the LJ-G Series 2D laser displacement sensor by Keyence. The resulting performance is extraordinary - a rate of 4,000 to 5,000 parts per hour with micron level accuracy. Duhamel DTI is an engineering firm located at Domène, near Grenoble, at the foot of the French Alps. Its highly...

Read More »
Workbenches

Wet Bench Units feature touchscreen interface.

To facilitate magnetic particle testing, Magnaflux A- and D-Series Wet Bench Units are equipped with touchscreen HMI, which helps operators spend less time using equipment controls and more time looking for defects. Interface helps maximize productivity with- features such as adjustable magshot timer and double-mag shot. Upgrade options include auto-bath, auto-mag, pneumatic tailstock, and...

Read More »
Lista to Feature Updated Arlink
Workbenches

Lista to Feature Updated Arlink

Updates include LED lighting, USB charging ports, new paint and trim options, and more Allentown, PA- – Lista will be showcasing its newly revitalized Arlink® 8000 modular workstation at Booth #1431 at the Assembly Show in Rosemont, IL on October 27-29. The Arlink 8000 offers a Definite Positioning System®, companion storage, electrostatic control, and more. Updates also include:  • New...

Read More »
Workbenches

Keysight Technologies' EDA Simulation Tools Seminar Details Solutions for Solving Signal/Power Integrity Challenges

What: This free seminar will discuss the new features included in Keysight's EEsof EDA simulation tools and how the software helps engineers, focused on high-speed digital electronics, solve their toughest design challenges. The seminar will look at all stages of the pre-layout, post-layout and measurement design flow. Tools featured in the seminar include: ADS, ADS Controlled Impedance Line...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics