Work Carts

Battery Powered Cart hauls loads up to 1,500 lb.
Work Carts

Battery Powered Cart hauls loads up to 1,500 lb.

Featuring variable speed twist grips, PartsCaddyLite motorized cart allows operator to travel at speeds of 0-3 mph forward or backward. With heavy duty 24 V motor powered by two 12 V batteries, cart can perform without recharging for entire shift. Self-propelled unit is designed for moving heavy loads from one point to another in hospitality and hospital environments, eliminating manual pushing...

Read More »
Utility Carts function as cart, toolbox, and workstation.
Work Carts

Utility Carts function as cart, toolbox, and workstation.

Stanley® Proto® Utility Carts are available in 46 x 39 x 23 in. heavy-duty and 38 x 37 x 20 in. standard-duty models. Heavy duty model has lift lid with vinyl top that serves as 900 inÂ-² work surface when closed. Storage area includes two 2¾ in. deep drawers and one 6 in. deep drawer, both which open and close on 100 lb ball bearing slides. Standard duty model is basic...

Read More »
Lean and Green Carts Reduce Handling Costs for DCs and Warehouses
Work Carts

Lean and Green Carts Reduce Handling Costs for DCs and Warehouses

Kinetic Technologies, Inc. has introduced the ProFlow series of carts designed for lean material handling in warehouses and distribution centers. Welded steel multi-panel deck, extra safety features, replaceable wear parts, low maintenance and a two-year warranty yield a low cost of ownership. Lower cart tare weights, higher payload ratings, lower push/pull forces allow more on-the-job...

Read More »
Rubbermaid Commercial Products Wins ISSA Innovation Award with DVAC(TM) 1-Pass Cleaning Solution
Work Carts

Rubbermaid Commercial Products Wins ISSA Innovation Award with DVAC(TM) 1-Pass Cleaning Solution

Winchester, VA (October 14, 2008) - Rubbermaid Commercial Products (RCP), the leader in durable facility maintenance solutions was awarded a 2008 ISSA Product Innovation Award for its new DVAC(TM) 1-Pass Cleaning Solution. The award was presented at the cleaning industry's largest trade show, the International Sanitary Supply Association (ISSA)/ INTERCLEAN show held in Las Vegas, NV. The ISSA...

Read More »
Shure's Technician Carts
Work Carts

Shure's Technician Carts

Shure Manufacturing Corporation's Technician Carts feature maximum storage capacity and portability. All welded construction provides stability and durability for any shop environment. See Shure's Technician Carts at www.shureusa.com or call us at 1-800-227-4873. Features: o Standard Technician Cart offers top and bottom shelves with a lockable drawer o Deluxe Technician Cart offers an additional...

Read More »
Work Carts

Bulk Laundry Carts provide 48 cu-ft capacity.

With wide opening that spans nearly entire width of cart, Model 72L enables access to goods in bottom and corners of cart with minimal bending and reaching. To secure folded, stacked goods during movement, or for over-the-road transport, Model 72N includes netting that snaps onto edge of opening. Both models measure 48 x 28Â-½ x 59 in. and come in 18 colors with 6 in. rubber casters, either...

Read More »
Work Carts

Hand Truck is available in 4 different configurations.

With overall height of 54 in., A-Frame truck is offered with louvered panel on one side and steel pegboard on other, steel pegboard or louvers on both sides, and louvered panels and steel pegboard on both sides. Each configuration is fitted to 1Â-½ in. angle iron A-frame mounted on 12 ga steel deck measuring 48 x 30 in. with 1½ in. lip up. Unit's deck has reinforced channels and...

Read More »
Workstation secures and protects computers on shop floor.
Work Carts

Workstation secures and protects computers on shop floor.

Able to accommodate keyboard, CPU, printer, supplies, and 21 in. monitor, workstation provides security and protection against dust, dirt, and other airborne contaminants for computers on shop floors. Lexan® upper door insert facilitates screen viewing, and all doors feature keyed-alike, built-in locks. Available with forklift/mobile base, workstation features ergonomic, sliding keyboard...

Read More »
Compact Medical Cart has 150 lb capacity.
Work Carts

Compact Medical Cart has 150 lb capacity.

Designed for use as medical equipment, PACS OR, or EMR cart, Zido® has 4 in. casters, enabling it to move from room to room and over elevator thresholds. It is offered with frame heights of 31, 35, 40 in., as 66 in. high pole cart, and in height-adjustable version, with choice of 22 x 17 or 25 x 20.5 in. shelves with weight capacity of 50 lb. Over 16 accessories can be added, including...

Read More »
Work Carts

Surgical Case Carts feature rugged design.

Offering wide range of choices in horizontal and vertical closed carts as well as open-wire cart designs, customizable Steril-Eze® surgical case carts feature super-clean type 300 series SS construction. Bottom shelf can be sloped slightly forward to allow drainage, while doors have their own integral drain systems to control against moisture entrapment. Removable interior shelf brackets...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers