Work and Load Positioners

Pan/Tilt Positioner operates in harsh marine environments.
Work and Load Positioners

Pan/Tilt Positioner operates in harsh marine environments.

IP66 rated EPT-40 Pan/Tilt Positioner features pan speed of up to 60°/sec, continuous 360° pan range, tilt range of +45/-30°, and side-mounted payload of up to 50 lb. Control electronics are configurable to accept Marine Radar TTM message data for slew-to-cue operations with radar, and incremental encoder with 2,048 resolution provides position feedback while also providing...

Read More »
Pan and Tilts position loads up to 70 lb.
Work and Load Positioners

Pan and Tilts position loads up to 70 lb.

Featuring fully-sealed, all-weather design, PTU-D300 series pan-tilts provide computer-controlled positioning of payloads, 360-continuous pan, and flexible payload mounting bracket system. Products are designed for camera, antenna, laser, and multi-sensor applications. Also available, PTU-D46 series includes features such as microstepping, slow-approach mode for tracking, and presets. Models...

Read More »
Antenna Positioner provides payload capacity to 70 lb.
Work and Load Positioners

Antenna Positioner provides payload capacity to 70 lb.

Featuring all-weather design, computer-controlled, pan-tilt Model PTU-D300 supports fixed and mobile antenna and communications laser positioning applications. Built-in dynamic control capabilities include on-the-fly speed and position command changes at over 30 Hz for real-time tracking. Remote control of unit is provided through RS-232 or RS-485 serial interfaces with multiple software options....

Read More »
Lift and Tilt Tables facilitate order picking processes.
Work and Load Positioners

Lift and Tilt Tables facilitate order picking processes.

Offered in various capacities, sizes, and travels, combination lift and tilt table line of work positioners tilt bins of parts for order picking or position loads for assembly operations. Lift tables raise loads up and down for ergonomic positioning, while tilt tables position load up to 60°. Lift and tilt operations are individually controlled via joystick. Products use lifetime-lubricated...

Read More »
A Guide to Quality Control of the SMT Process
Sponsored

A Guide to Quality Control of the SMT Process

The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.

Read More »
Skid Lifter offers 3,000 lb capacity and 32 in. lift height.
Work and Load Positioners

Skid Lifter offers 3,000 lb capacity and 32 in. lift height.

Designed to pick up load on skid or open-bottom pallet, Skid Lifter transports load to workplace and raises it to working height using 2-speed manual pump. For loads less than 600 lb, unit shifts into Quick-Lift mode so forks can be raised 32 in. in just 18 strokes of steer handle. For heavier loads, unit shifts to Ergo-Lift mode, raising forks to full height in 55 strokes. Load stabilizers...

Read More »
Positioner offers 6000 lb capacity with 25 in. travel.
Work and Load Positioners

Positioner offers 6000 lb capacity with 25 in. travel.

Power Rotate-Multiple Position System allows assembly workers to retrieve parts continuously by rotating full bin to within operational reach. Rotating base is air powered with spiral gear and equipped with outer ring of support casters for offset loads. Power rotating function is bi-directional and provides 360° operation with zero-effort positioning. Base can support 4 independent lift...

Read More »
Tilter allows conformal coating of printed circuit boards.
Work and Load Positioners

Tilter allows conformal coating of printed circuit boards.

Tilt accessory is available on SC-300 Swirl Coat(TM) applicator and provides 4 positions: 30° from vertical to left, right, front, or back. Tilt is controlled by company's Easy Coat® for Windows NT® software and can be retrofitted into existing Century conformal coating systems. It operates in bead, monofilament, and swirl modes and is suitable for use with solvent-less...

Read More »
Welding Positioner has 300 lb capacity.
Work and Load Positioners

Welding Positioner has 300 lb capacity.

Mini Pro tabletop positioner has motorized, variable-speed rotation with forward-reverse switch, speed potentiometer, and dynamic braking. Rotation speed is variable from .37 to 13 rpm and pinned tilt range is from 0 to 90°, with 15° increments. Features include 8 in. dia 3-jaw chuck, 300 A welding ground, 2.5 in. spindle through hole, and on/off foot switch. Positioner operates on...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics