Work and Load Positioners

Work and Load Positioners

Pan-Tilt Unit supports wheeled vehicle applications.

Designed for use in Driver Vision Enhancer Family of Systems and Forward Activity Detection Systems, Model PTU-D48-DVE provides turn-key positioning solution for dynamic, computer-controlled positioning of pan and tilt. Unit features full digital interface with speed/acceleration control and slew-to-cue functionality. Measuring 7.8 x 5.4 x 5.5 in., device operates on single 16-32 Vdc power input...

Read More »
Rotary Work Positioner is suited for welding and assembly.
Work and Load Positioners

Rotary Work Positioner is suited for welding and assembly.

Bidirectional, vertically rotational work positioner provides operators with 360° infinitely variable, electronic regenerative speed rotation from 0-17 rpm and full work height adjustment activated by foot pedals. Control panel enables adjustment of rotational direction/speed, and mounting plate features multiple concentric bolt channels for tooling and parts. Handling work of up to 400...

Read More »
Work and Load Positioners

Pan and Tilt Head System meets IP66 ratings.

Suited for demanding environments, 24 Vac VPT-PLUS01 combines built-in high-speed drive with large housing to allow site specific camera and lens combinations to be used. Unit is fully rotational with two RS485 protocols and 4 alarm inputs built in. Zero backlash feature and 0.02° preset accuracy ensure camera stops exactly when and where required, while variable pan and tilt speeds make...

Read More »
Work and Load Positioners

Off-the-Shelf Slide Tables

EAST PROVIDENCE, R.I. - October 10, 2008 - igus®' DryLin® slide tables are available pre-assembled and off-the-shelf, saving the engineering time and in-house manufacturing costs involved with custom assemblies. They are a bolt-on solution requiring zero maintenance and are extremely low cost when compared to ball bearing and custom slide table systems. The DryLin slide tables require no...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Positioning System offers six degrees of freedom.
Work and Load Positioners

Positioning System offers six degrees of freedom.

With 10 cm dia and height of 11.8 cm, M-810 Miniature Hexapod 6-Axis Precision Positioning System offers travel ranges of up to 40 mm in XY plane and 13 mm in Z-direction. Capable of positioning loads of up to 5 kg at velocities up to 10 mm/sec, it comes with 6-axis Hexapod controller and software, and 6 high-resolution actuators that are connected directly to single moving platform. Users can...

Read More »
Work and Load Positioners

Pan-Tilt Units control payloads up to 15 lb.

Weighing under 10 lb, PTU-D48 computer controlled pan-tilt units have payload capacity of 15 lb (side mount) and 10 lb (top mount). They feature fully controllable pan and tilt speeds ranging from below 0.006-100°/sec, and ±0.006° positioning resolution in pan axis. Suited for fixed and mobile applications in industrial and military markets, units have operating temperature...

Read More »
Hydraulic Shaft Locking Bushings suit automated systems.
Work and Load Positioners

Hydraulic Shaft Locking Bushings suit automated systems.

Model ETP-Octopus(TM) bushings can be set up for frequent locking/unlocking of linear slides or similar motion devices at one or series of positions from remote switching location. Providing uniform and repeatable locking pressure, they are designed for use with sliding shafts and components in automated systems. Devices are available in 3 models with pressure ranges to 6,500 psi and with...

Read More »
Work and Load Positioners

Pan-Tilt Unit positions medium payloads in real-time.

Suited for fixed and mobile applications in military and industrial markets, computer-controlled PTU-D100 offers built-in dynamic control capabilities, including on-the-fly speed and position command changes at over 60 Hz. Unit provides payload capacities of 25 lb for side mount and 15 lb for top mount, with pan and tilt speeds from 0.0075-120°/sec. Constructed of anodized aluminum, unit is...

Read More »
Positioning System handles surveillance applications.
Work and Load Positioners

Positioning System handles surveillance applications.

Based around Pan&Tilt (P&T) unit, Bosch high speed positioning system offers camera module with autofocus and choice of high definition camera and zoom lens combinations, all enclosed within polycarbonate and extruded aluminum casing. Self-contained, all-weather system delivers 0.02Â-º accuracy. In manual mode, 360º continuous panning at up to 100º/sec is complemented by up...

Read More »
Work and Load Positioners

Lifter/Transporter includes battery-powered lift mechanism.

Designed for transporting, lifting, and positioning loads in high-tech, industrial, retail, and office environments, Dandy Lift(TM) lifts and lowers at touch of button using 24 V battery. It is available in 5 models with capacities from 220-500 lb, table sizes of 20 x 31.5 and 24 x 36 in., and raised heights to 51 in. Features include high-speed linear actuator for precise positioning, battery...

Read More »

All Topics