Richco, Inc. Releases FTH-39 Cable Tie Holder
MORTON GROVE, IL - February 25, 2009 - Richco, Inc. is delighted to announce the release of its new cable tie holder, the FTH-39. The panel fastener and tie holder are combined in one product, and the low profile head design saves space. The FTH-39 allows for the preassembly of cable ties and holds them in place after preassembly. The FTH-39 is RoHS compliant. To review the FTH-39 or other cable...
Read More »
Cable Drum Extensions
On our AVC16, AVC20, C16, and C20 families of reels, we now offer a cable storage drum extension option, seen in the picture to the left. Similar in purpose to divider discs, these drum extensions allow user access to both ends of the cable without taking off the entire length, saving valuable time and effort. These reels are used in a variety of applications, including military, commercial...
Read More »Hannay Reels to Exhibit Reels for the Transportation Industry at Work Truck Show 2009
Westerlo, NY, February 6, 2009 - Hannay Reels today announced that it will exhibit at the Work Truck Show, March 4-6, 2009, at booth number 1972 in the McCormick Place West building in Chicago, Ill. The company offers several recently updated reels designed for a variety of work truck applications, including welding, machine, grounds maintenance, air compressor and wash down. Hannay's custom...
Read More »Holocom® Announces Seven New Products and Improvements
(Fort Lauderdale, Fla - August 19, 2008) Holocom® Networks, the leading provider of high-security protective distribution systems (PDS) for SIPRNet and other classified networks, today announced seven new products and improvements to several existing products. Holocom made the announcement at the Armed Forces Communications and Electronics Association's LandWarNet conference. Holocom's new...
Read More »
There's More to Plating than You Zinc!
To find out more about the seven demands you should make of your zinc plater, download now.
Read More »Edge Clip Tie Holder attaches cable bundles to boards.
Model FTH-31 features clip that accepts many different size ties and allows ties to be mounted in 2 directions. Plastic housing with assembled metal clip provides strong retention to panel, and holder accepts panels from 0.03-0.12 in. RoHS-compliant product is available in V2 Nylon 6/6, UL94 V0 Nylon 6/6, and High-Temperature Nylon 4/6.
Read More »Screw-Mount Cable Tie Holders ensure secure installation.
Made of NYLON 6/6 UL 94 V-2/0, FTH-34 and FTH-35 have low-profile (.195 in.) design suited for space-limited applications. Screw mounting provides strong and secure installation, while 4-way cable tie entry facilitates and accelerates part orientation. Respectively, FTH-34 and FTH-35 accommodate No. 8 (M4) or 10 (M5) screw size and accept WIT-18 through 60 and QTE-18 through 50. Each part is...
Read More »
Cable Tie Holder uses pressure to facilitate assembly.
Pressure hold cable tie holder Model FTH-33 allows pre-assembly of cable tie into holder and secures it in position. Cupped mounting base prevents dust ingress while providing tight grip to board in environments prone to vibration. Part accepts all Richco QTE-30/50 and WIT-30/50 cable ties.
Read More »
Cable Tie Holder is RoHS-compliant.
FTH-30 series cable tie holder snaps in place for installation in panel and holds bundle with pre-assembled cable tie. When tail end of cable tie is inserted, tie holder locks it in place. It can also be used as standard tie holder, using ties that are not pre-assembled.
Read More »Wire Saddles feature adhesive base.
Offering secure installation, RoHS compliant WWSB Series is made of durable, UL94-HB certified nylon. Users just pull release tab from adhesive base and attach to application. Wires are installed and secured by pressing them through flexible funnel system.
Read More »
Circuit Board Supports hold wires and bundles.
EZ Twist lock circuit board supports feature locking base that snaps into chassis by hand to enable loading and unloading of cables and wires with twist of fingers. Additional arm inside twist lock holds smaller wires or bundles. Molded in natural nylon 6/6, parts fit 4.75 mm dia hole and panel thickness of .76-1.98 mm.
Read More »
ISO-Certified Plastic Injection Molding from Rodon
The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.
Read More »
