Grinding Wheels utilize durable bond posts.
Wheels

Grinding Wheels utilize durable bond posts.

Norton NorPor(TM) controlled-porosity, open-structure grinding wheels create more chip clearance, decreasing possibility of wheel loading and burning of part, in wet and dry grinding applications. They are available in 4 abrasive types: White 38A, Pink 25A, Ruby 48A, and Purple 3SGR; and 3 shapes: Type 1, Straight; Type 5, Recessed 1 Side; and Type 7, Recessed 2 Sides.

Read More »
Solid Disk Handwheels are ISO 9001 certified.
Hand Wheels

Solid Disk Handwheels are ISO 9001 certified.

Elesa® solid disk handwheels are available with locking retractable handle or with safety fold-away handle. They are made from high-impact technopolymer plastic with black matte finish. Hub is molded and made of steel. Resistant to solvents, oils, grease, and other chemical agents, handwheels are available with keyways and set screw holes. They are designed for applications where it is...

Read More »
Truck Rim Cleaner blasts off dirt quickly.
Finishing Wheels

Truck Rim Cleaner blasts off dirt quickly.

GLPX Extreme rim b1aster uses 0.170 to 0.330 mm steel shot to blast away powder coatings, dirt, grease, oil, stones, and other road elements from steel or aluminum truck rims up to 26.5 in. dia. Cycle time is 1.5 to 5 min depending on thickness of coatings to be removed. Elevator system cleans out old particulate to keep shot clean with each cycle. Unit has three 5 hp impeller motors, automatic...

Read More »
Handwheels are resistant to solvents, oils, and grease.
Hand Wheels

Handwheels are resistant to solvents, oils, and grease.

Two-Spoked Handwheels are available in 2 versions: either with or without revolving handle, or with locking retractable handle. Locking retractable handle is designed to pivot freely. Elesa® original designed handwheels are made from high-impact strength technopolymer plastic with black matte finish; hubs are molded in, and made of steel with black oxide finish; and cover disk is matte,...

Read More »
Understanding Water Hammer
Sponsored

Understanding Water Hammer

DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.

Read More »
Casters have hydraulically staked kingpins..
Rolling Wheels

Casters have hydraulically staked kingpins..

Freedom Series(TM) casters offer ultra quiet precision swivel section that is sealed for life. It consists of heavy-duty precision ball bearing sealed for life at factory to protect against damaging effects of water, dirt, grit, or chemicals. It is capable of all radial and thrust loads as well as ultra quiet operation. Freedom Series casters are corrosion resistant due to polished zinc plated...

Read More »
Flexible Discs grind and blend in one step.
Wheels

Flexible Discs grind and blend in one step.

Cotton fiber layers in Cut-N-Finish discs are impregnated with aluminum oxide grains and then pressed and bonded together, so discs constantly reveal fresh abrasives as they work. Suitable for edge grinding, surface blending, and working fillet welds on stainless steel and aluminum, discs are available in 4 1/2 and 7 in. sizes, and in A24, A36, A54, and A80 grit sizes in both flexible and medium...

Read More »
Caster Wheels come with green rubber tires.
Rolling Wheels

Caster Wheels come with green rubber tires.

GR Series wheels have abrasion-resistant tires mounted on black nylon or aluminum center. Options include roller bearings or maintenance-free ball journal bearings that are lubricated for life. Wheels are available in 4, 5, 6-1/4, and 8 in. diameters with load capacities of 400, 440, 660, and 880 lb, respectively. Tread width is 1-1/4 inch for four and five-inch diameter wheels and 1-5/8 inch for...

Read More »
Abrasive Wheels provide aggressive cutting.
Finishing Wheels

Abrasive Wheels provide aggressive cutting.

Cyclone Flap Wheels, made with aluminum oxide abrasive resin cloth, are available in stem-mounted and unmounted versions. Stem-mounted wheels are used in manual operations on portable tools and provide consistent aggressive action in hard-to-reach areas. Unmounted wheels are used on bench grinders and provide controlled grinding, finishing and deburring action on machined parts and flat surfaces....

Read More »

All Topics