Grinding Wheels quickly remove heavy welds.
Wheels

Grinding Wheels quickly remove heavy welds.

Sigma Green Premium Grinding Wheels have zirconia/ceramic grain. Designed for right-angle grinders, wheels come in 4, 4 1/2, 5, and 7 in. diameters, and are available with 5/8-11 throw-away adapters. Wheels cut up to 50% faster than aluminum oxide on 316 stainless steel, and run 20% cooler. Eliminating discoloration and warping of stainless steel and highly alloyed materials, typical applications...

Read More »
Cutting Wheel offers design for extended life.
Cutting Wheels

Cutting Wheel offers design for extended life.

Slicer Plus has 2 layers of fiberglass to stiffen wheel and ensure accuracy throughout cut. Wheel has ceramic-coated, abrasive-grain formulation and measures .045 in. thick. Slicer Plus cut-off wheel is available for 4 1/2 and 6 in. capacity, right-angle grinders. It is suitable for use on stainless steel, high-carbon steel, and high-tensile strength alloys, as well as cutting partially embedded...

Read More »
Measuring Wheel Hand Grip reduces operator strain.
Handle Grips

Measuring Wheel Hand Grip reduces operator strain.

Ergonomic, pistol-styled handgrip reduces wrist fatigue and provides wheel control in rough terrain or windy conditions. Design includes reduced-wear, clamp-lock mechanism for telescoping aluminum handle that permits handle to extend and retract in same relative position. Handle design is available on mechanical measuring wheels 10 in. or larger in diameter, which includes Series 31, 45, 60, and...

Read More »
Abrasive Points produce highly polished finish.
Mounted Grinding Wheels

Abrasive Points produce highly polished finish.

Unitized Megabrite(TM) Mounted Points provide smooth, chatter-free grinding while maintaining part geometry. Points can be used for light deburring, cleaning, finishing, and polishing machined and cast parts. Made of nonwoven, synthetic-fiber material, impregnated with aluminum oxide or silicon carbide abrasives, conformable points constantly reveal fresh abrasives as they work. Points are...

Read More »
Grinding Wheels are continually sharpened.
Miscellaneous Software

Grinding Wheels are continually sharpened.

CIMFORM(R) MSB has abrasives that micro-fracture during use, creating new grinding surface, and thus constantly sharpening themselves. They are suitable for centerless, center-type, micro-centric, surface, surface/creepfeed, internal, tool manufacturing, and tool cutter applications. MILSPEX(R) educational software tool familiarizes user with grinding technology and processes. DATA PRIME(TM)...

Read More »
Solid Disk Handwheels resist solvents, oils, and grease.
Hand Wheels

Solid Disk Handwheels resist solvents, oils, and grease.

Elesa(R) Solid Disk Handwheels are available in 2 versions. Phenolic plastic handwheel is available with or without revolving handle. Black-oxide steel hub is supplied blank without bore. Handle has zinc-plated steel, threaded spindle. Reinforced phenolic plastic version with black, glossy finish offers locking, retractable, steel handle with black-oxide finish. Steel, molded-in hub is blank...

Read More »
Grinding Wheels utilize X10 technology.
Wheels

Grinding Wheels utilize X10 technology.

Neptune roll grinding wheels resist softening when exposed to water-based coolants. Three different resin bond systems are available: Neptune SR (Soft Roll), Neptune MR (Medium Roll), and Neptune HR (Hard Roll). Roll grinding wheels are available from H to P grades in sizes from 12 to 42 in. in diameter with grit sizes from 30 to 220. They grind rolls made from cast iron, cast steel, forged...

Read More »
Composite Wheels operate in clean rooms.
Rolling Wheels

Composite Wheels operate in clean rooms.

Power-Core wheels eliminate possibility of metal particulate contamination in clean room operations. Composite wheel is comprised of two components: machined plastic tire and roller bearing. Tire material has high resistance to flow under load and retains tensile and flexural strength as well as dimensions in shock load applications. Bearings use clean room approved grease. Wheels eliminate need...

Read More »
Grinding Wheels have open structure for cooler operation.
Wheels

Grinding Wheels have open structure for cooler operation.

CarboCool(TM) controlled-porosity grinding wheels allow high metal removal rates. Greater chip clearance decreases possibility of wheel loading. During wet grinding, open-structure allows greater coolant flow to interface between wheel and work piece, reducing temperature at point of contact. Wheels are available in White 38A, Pink 25A, Ruby 48A, and Purple 3SGR; and in 3 standard shapes: Type 1,...

Read More »
Wheels clean, deburr, and finish machined parts.
Finishing Wheels

Wheels clean, deburr, and finish machined parts.

Megabrite(TM) Type 1 unitized and convolute wheels are constructed from non-woven, compressed and bonded, synthetic-fiber material, with choice of aluminum-oxide or silicon-carbide abrasives. Unitized wheels are smear-resistant and non-metallic, and have up to 4 in. dia with 3/16, 1/8, or 1/4 in. thickness. Convolute wheels, impregnated with abrasive grains and resin, come in 6 and 8 in. dia with...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics