Hand Wheels

UltraGuard Antimicrobial Knobs and Handles

Monroe Engineering Products is proud to introduce it's new line of UltraGuard knobs, handles and handwheels coated with AgION antimicrobial compound. The result is a product that contains another defense against the growth of bacteria, mold and mildew throughout the work environment. The coatings main active ingredient is silver, the effectiveness of which has been established over the centuries....

Read More »
Abrasive Wheel removes light welds, burrs, rust, and paint.
Wheels

Abrasive Wheel removes light welds, burrs, rust, and paint.

Suitable for industrial fabrication and maintenance purposes, Sigma Screen(TM) depressed center Type 27 wheel with 4.5 in. dia features blend of zirconia-ceramic abrasive grains bonded to flexible mesh for grinding, blending, and finishing applications. Cool-running, chatter- and clog- free mesh wheel is available with coarse, medium, and fine grits. Several wheels can be stacked onto grinder and...

Read More »
Cut-Off Wheels produce minimal burrs.
Cutting Wheels

Cut-Off Wheels produce minimal burrs.

Available in Type 1 or Type 27, Super Quickie-Cut(TM) Cut-Off Wheels provide clean cutting of carbon and stainless steel. Line includes 4 models with thinnest wheel measuring 4Â-½ x .035 x 7/8 in. Other available sizes include 4½ x .045 x 7/8 in. and 6 x .045 x 7/8 in.

Read More »
Hand Wheels

Knobs and Handles are coated with antimicrobial compound.

UltraGuard(TM) knobs, handles, and handwheels are coated with AgION(TM) antimicrobial compound, preventing growth of bacteria, mold, and mildew in work environment. Compound combines silver with inorganic ceramic permitting continuous, controlled release of ionic silver. Products are suited for hospital, pharmaceutical, and restaurant equipment, as well as other industries subject to rigorous...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
New Norton® Charger Plus Depressed Center Wheels for Stainless Steel Applications Improve Performance by 30 Percent
Wheels

New Norton® Charger Plus Depressed Center Wheels for Stainless Steel Applications Improve Performance by 30 Percent

10/25/06 The zirconia alumina abrasive in Norton Charger Plus wheels is the best grain to cut and grind stainless steels, according to recent tests conducted by Saint-Gobain Abrasives. The smooth grinding action enhances both the cut rate and life of the wheel and lets the wheel do the work, not the operator. The clean bond contains no sulphur, iron or chlorine - eliminating the opportunity for...

Read More »
Abrasive Discs work with hard-to-grind materials.
Abrasive Coated Discs

Abrasive Discs work with hard-to-grind materials.

With blaze orange grain-side color, Norton SG® BLAZE R980 discs cut materials such as stainless steel, cobalt, chrome, inconel, and titanium. Conical shaped Type 29 flap wheels; single- and 3-ply Speed-Lok discs; and Type 27 flat discs feature wear resistant ceramic grain, polyester backing, and grinding aid. Each grain continually fractures in grinding process, along sub-micron faults in...

Read More »
Depressed Center Wheels suit right angle grinders.
Wheels

Depressed Center Wheels suit right angle grinders.

Engineered with soft N-grade bond for high stock removal, Fast Cut Series Type 27 Depressed Center Wheels are Â-¼ in. thick, single-grain grinding wheels made from aluminum oxide. Units are available in 4, 4 ½, 5, 7, and 9 in. diameters with 5/8, 7/8, or 5/8-11 in. arbor hole. Carton quantities range from 10 to 25.

Read More »
Thermoplastic Wheel bears load capacities of 600-1,400 lb.
Rolling Wheels

Thermoplastic Wheel bears load capacities of 600-1,400 lb.

Designed for Faultless 400, 800, and 1400 standard and stainless steel casters, Faultless® Caster Reinforced Thermoplastic Wheel features 65D durometer rating and is resistant to water, chemical absorption, and steam cleaning. Waffle design of blended, reinforced thermoplastic materials allows standard operating temperatures from -20 to +250°F. High-temperature version operates up to...

Read More »
New Norton BRGg Gear Grinding Wheels Generate up to Five Times Longer Life on Parallel Axis Spur and Helical Gears
Wheels

New Norton BRGg Gear Grinding Wheels Generate up to Five Times Longer Life on Parallel Axis Spur and Helical Gears

--High Performance BRGg Wheels for Gear Applications Can Be Used at Greater In-Feed Rates to Reduce Cycle Time-- WORCESTER, Mass., May 17, 2006 -- BRGg-VPHS high-speed wheels are the latest addition to the complete line of grinding wheels engineered for superior worm and angle gear grinding. Norton BRGg wheels are designed to reduce grind cycle times by increasing metal removal rates. The...

Read More »
Metabo Introduces New, Longer-Lasting Super Slicer to Its Choice Cuts Family of Slicer Wheels
Cutting Wheels

Metabo Introduces New, Longer-Lasting Super Slicer to Its Choice Cuts Family of Slicer Wheels

WEST CHESTER, Pa., September 2006 -- Metabo Corporation, a leading international manufacturer of professional grade portable electric power tools and abrasives for industrial, construction and welding applications, now introduces a new version of its Super Slicer cutting wheel that outperforms its predecessor by more than 50 percent. By reformulating the blend of abrasives, the Super Slicer...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics