CGW Offers Surface Conditioning Abrasives Line
Abrasive Pads

CGW Offers Surface Conditioning Abrasives Line

NILES, ILL - August 2009 - CGW-Camel Grinding Wheels has a full line of surface conditioning abrasives designed to quickly prepare work pieces for finishing. CGW's surface conditioning abrasives are made from nonwoven materials impregnated with abrasives for easy removal of materials such as sealants, paints and rust. Consisting of more than 100 products, the surface conditioning line contains EZ...

Read More »
Ondrives Commercial Power Transmission Range
Helical Gears

Ondrives Commercial Power Transmission Range

Ondrives Ltd has branched out into commercial power transmission parts, making their product range even bigger than ever before. The ever-favourite precision mechanical components are still available with a new precision gear range also introduced. In summary, the commercial power transmission range includes all of the following as standard - toothed bar stock, pulleys & belts (guides &...

Read More »
Rolling Wheels

Dually Wheels handle heavy loads.

Suited for Â-¾ and 1 ton trucks, Classic Dually Wheels come in 17 x 6.5 in. for front and rear fitments on 8-lug dually pick-up trucks. Units are made from one-piece forged aluminum with polished finish. Designed, manufactured, and tested for heavy load applications, wheels carry 3,200 lb load rating.

Read More »
Abrasive Blast Equipment

Blast Wheels help reduce cleaning cycle times.

Available with unit bearing for belt-driven applications, EZEFIT® wheel contains all features and benefits of direct-drive wheel. It eliminates need for mounting base plate, reduces vibration and wheel assembly time, and offers fail-safe wheel component alignment. Mounting hardware allows for upgrades on most wheel blast machines - Wheelabrator® and non-Wheelabrator - that include...

Read More »
Support All Types of Reinforcing Steel with Strong, Lightweight Plastic Rebar Supports from Erico®
Rolling Wheels

Support All Types of Reinforcing Steel with Strong, Lightweight Plastic Rebar Supports from Erico®

SOLON, Ohio, USA, June 2009 - Plastic Rebar Supports, part of the LENTON® line of concrete reinforcement products from ERICO®, are used in tilt-up, precast and cast-in-place slab and deck construction. The supports, which include Rebar Chairs, Slab/Beam Bolsters and Wagon Wheels, are ideal for supporting all types of reinforcing steel, such as stainless, black and epoxy-coated rebar. The...

Read More »
Wheels

Blast Wheel is designed for optimal ROI.

Used for surface preparation, Genesis blast wheel incorporates features designed to reduce maintenance time and improve efficiency. Front-of-housing access to runnerheads enables full assembly in less than 1 hr, and dual-tapered vanes eliminate shot locking. Along with replaceable housing liners and cast linings made with P-41 metallurgy, wheel includes safety features such as lid with pin-locked...

Read More »
Wheels

Grinding Wheels deliver application versatility.

With functionality matched to specific applications, Choice Cuts series is comprised of 4 cutting wheels with selection of abrasive grains and engineered resin bond formulas. Original Slicers are 0.040 in. thick aluminum oxide wheels, and 1/16 in. LongLife Original Slicer versions are also available. Other products include 0.045 in. thick Slicer-Plus and 0.045 in. Super-Slicer. All wheels are...

Read More »
Wheels

Blast Wheels offer simplified assembly and maintenance.

Genesis series includes high-speed, 14-18 in. dia wheels with single- or double-sided runnerheads as well as low-speed, 19.5-26.5 in. dia wheels. Latter exhibits reduced abrasives consumption, better cleaning, and lower horsepower requirements. Features such as front-of-housing access to runnerheads enable full assembly in less than 1 hr, setting pattern length is one-step job, and dual-tapered...

Read More »
Bonded Abrasive Wheels suit cutting/grinding applications.
Cutting Wheels

Bonded Abrasive Wheels suit cutting/grinding applications.

Working with steel, iron, and other ferrous metals, Vortec Pro(TM) wheels are reinforced with fiberglass webbing for stability and resin-bond-formulated for aggressive stock removal and accelerated cutting. Type 27 grinding and cutting products, offered in 4-7 in. dia, have aluminum oxide grain and are designed for use on right-angle grinders. Available from 2-7 in. dia, Type 1 cutting wheels...

Read More »
Rolling Wheels

Lamborghini Selects Alcoa Wheels for Murciélago LP 670-4 SuperVeloce

4/23/2009 Distinctive Wheel Contributes A 20 Percent Weight Savings and Enhanced Style CLEVELAND--Alcoa Auto Wheels has been selected by Automobili Lamborghini to supply lightweight wheels for the Murcielago LP 670-4 SuperVeloce (SV). The forged aluminum wheels reduce un-sprung weight and contribute to the SV's 100kg (220 lb.) mass reduction over the standard Murcielago. The new Murcielago SV is...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics