New AEON Electroplated Grinding Wheels Provide High Grit Retention Levels
Can hold extremely tight profile tolerance of ± 5µm at a maximum wheel diameter of ~24" (600 mm.) and width ~12" (300 mm.), weighing up to 551 lbs (250 kg). Offer single usable abrasive layer design, with diamond or cBN particles mechanically fixed onto the core surface by electrochemical process of nickel deposition. Ideal for high precision applications in the automotive, medical and...
Read More »
Latest Cutting Wheels are Designed for Use on Chop Saws
Available in diameters between 12 and 20 in., with 1-in. and 20-mm. arbors. Tiger Zirc wheels are ideal for demanding rail cutting applications. Feature triple reinforcements to support the wheels during heavy-duty cutting.
Read More »
New Diamond Single Layer Superabrasive Wheels Produce More Burr-Free Parts and Minimize Secondary Operations
Feature unique bond that reduces friction and allow lower grinding power. Offer heat resistance and lubricity to achieve larger depths-of-cut and cooler cutting. Provide higher stock removal rates and lower cost per part.
Read More »
New Inserted-Nut Grinding Wheels from Saint-Gobain are Customizable
Available in diameters from 8 in. thru 42 in. and in grit ranges from 16 thru 220. Offer improved wheel life and increased parts per wheel. Ideal for a wide range of industries including automotive, bearing, tool manufacturing, compressors, knife blades and job shop/ general machining.
Read More »
The Comprehensive Guide to Photo Chemical Machining
There are many benefits that photo chemical machining can provide for your precision components. Download this white paper, and learn everything you need to know about this versatile process.
Read More »
New Heavy Duty Casters & Wheels Designed for Heavy Industrial Applications
Spinfinity XC Caster series are offered in single-wheel and dual-wheel configurations. Includes large axles and massive double-stacked precision ball bearings in the wheels to accommodate the high speeds. Renegade Wheels diameter range from 9” up to 36” and load capacities span 1500 lbs. to 34,000 lbs.
Read More »
New FAB Buffing Wheels are Tear Resistant and Waterproof
Incorporates abrasive grains into buffing wheel and consistently results in single digit Ra values ranging from 1 to 5 Ra. Offers silicon carbide abrasive that uniformly dispersed and applied to both sides of the cloth, resulting in more consistent buffing performance. Improves worksite safety and reduces environmental impact of compound disposal.
Read More »
New Dual-Worm Grinding Wheels Enable Two Operations in One Grinding Wheel
Feature a design with high-performance vitrified bond section for grinding and a fine-grit resin section for polishing the gear teeth. Reduces harmonics (noise) and improves surface finish of Rz = 1.0mm and Rpk = 0.05mm. Provides high profile accuracy, high form holding and burn-free grinding in worm, profile and bevel applications.
Read More »
New PipeLiner Grinding and Mech Notching Wheels Developed for Pipeline Applications
Tiger Pipeliner Grinding Wheels design with a mix of top-quality abrasive grains, delivers fast cut rate and removes wagon tracks from the weld bead. Feature angle-of-use markings to ensure safe and proper use. Tiger Mech Notching Wheels are capable of grinding the starts and stops of the weld bead without widening or scarring the narrow channel.
Read More »
Latest Small Abrasives from Saint-Gobain are Suitable for Hard-to-Grind Materials
Threaded version mini flap wheels are available in 1", 2" and 3" diameters, mounted on a 1/4"-20 thread whereas Shank-mounted is available in 1", 2" and 3" diameters, mounted on a 1/4" steel shank. Cartridge Rolls are offered in 1/4", 3/8" and 1/2" diameters with 1 1/2" length and 1/8" height whereas the Spiral Rolls are available in 3/8" and 1/2" diameters with 1 1/2" length and 1/8" height....
Read More »
New Precision Micro-finishing Grinding Pins Available in 3 Diameters
Designed for small precision ID grinding in industries such as ceramics, electronics, mold-making and tool-and-die-making. Working ends are coated with either diamond or borazon. Includes 0.016” dia. with 500/600 grit, 0.020” dia. with 325/400 grit and 0.024” dia. with 325/400 grit.
Read More »
ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services
J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!
Read More »
