Wire Feeder suits heavy and general fab applications.
Featuring flexible, modular design, Flex FeedÃ-® 84 delivers consistent feeding over long conduit runs with large-diameter wires up to 3/32 in. or cored wires up to .120 in. Single-bench, dual-bench, and boom-mount configurations can be converted as workspace requirements change. Patented MaxTracÃ-® wire drive has rugged, cast-aluminum feed plate that protects wire and ensures consistent...
Read More »
Welding Brushes are designed for different base metals.
Radius™ Welding Brushes clean base material before welding and between each pass. Featuring steel-wire bristles, brushes for stainless steel include toothbrush-style 3 x 7 row brush, 2 x 9 row brush with slightly curved handle, and 3 x 19 row brush. For aluminum, toothbrush-style 3 x 7 row brush and 2 x 9 row brush with slightly curved handle have brass-wire bristles. With tempered-steel...
Read More »
TOUGH GARD Anti-Spatter Liquid Has New Look and Packaging - Offers Same Excellent Performance
WINDSOR, Ontario - Tregaskiss has given its trusted TOUGH GARD(TM) Anti-Spatter Liquid a new look, including updated labeling on all packaging sizes and a redesign of its 1-gallon jug. Tregaskiss also changed the lid and handle design on its 5-gallon pail of TOUGH GARD Anti-Spatter Liquid. The new labeling gives the product a more distinct look, while the packaging redesigns increase durability...
Read More »
Auto-Darkening Welding Helmet features 4 sensors and low-amp performance.
TwecoÃ-® WeldSkillÃ-® helmet can be used in both weld and grind mode and will darken when TIG welding even at 5 A. Solar powered helmet has viewing area of 3.86 x 1.69 in. and weighs 16 oz. When switching from dark-to-light, users can select from three switching speeds: short (0.25-0.35 sec), medium (0.35-0.50 sec) and long (0.50-0.80 sec). Sensitivity and delay knobs are on outside of...
Read More »
You're Gonna Need a Bigger Boot
Learn about sealing boot types and applications in marine environments.
Read More »
Auto-Darkening Filter provides one-touch digital controls.
Able to adapt to changing welding environments, Jackson Safety W60 TrueSight features optimized visibility and separate buttons that can be operated even with gloved hand to control grind, torch, and weld modes. Other features include built-in magnifying lens holder; adjustable settings for shade, sensitivity, and delay; as well as automatic on/off functionality. While 4 sensors reduce blockage...
Read More »
Welding Helmets deflect heat for extended wear.
Arc Armor(TM) Titanium 1600 has 16 in.Ã-² shade No. 10 passive lens, Titanium 7300 features 7.22 in.Ã-² viewing area and shades No. 8-13, 20 oz Titanium 9400 has 9.22 in.Ã-² viewing area and same shades, and Titanium 9400i features 9.22 in.Ã-² viewing area and lens that flips up to expose integrated grinding shield. Latter 3 auto-darkening models (9400/9400i/7300) feature...
Read More »
Conversion Parts help switch between MIG, flux-cored welding.
Centerfire(TM) conversion parts enable companies to switch between MIG and self-shielded flux-cored welding without gun changeover. Units allow Q-Gun(TM) with Centerfire(TM) consumables to be converted to accommodate either process. Using parts, welding operator can replace MIG nozzle, which directs shielding gas, with contact tip holder and insulator, since shielding gas is not needed for...
Read More »Safety Glasses are intended for welding applications.
In addition to 3 frame colors, Arc Armor(TM) ANSI-compliant safety glasses offer choice of clear or shade 5.0 lenses. Form-fitting orbital eye coverage and rubber ear pads provide wearer comfort, while soft foam eye guards keep out dust and perspiration. Lenses are shatterproof and feature anti-scratch coating, and shade 5.0 lens, suited for plasma or oxy-fuel cutting, also features reflective...
Read More »
Welding Helmet Coolers remove stagnant air, decrease lens fog.
Designed to fit most Miller Arc Armor Helmets, CoolBand(TM) reduces under hood temperature by up to 8Ã-
Read More »
Branson Introduces its New Line of Rotary Indexed Thermal Welding Systems
Danbury, CT, February, 2009 -- Branson Ultrasonics Corporation introduced its newest line of Rotary Indexed (RI) thermal welding systems which give manufacturers increased productivity and throughput for this assembly process. The Branson RI 201, 301 and 401 series welders integrates a two position rotary table with Branson's standard thermal welders and are used for staking, swaging, insertion,...
Read More »
Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics
Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.
Read More »