Welding Rods, Wire and Electrodes

Flux-Cored Welding Wires target chrome-moly applications.
Welding Rods, Wire and Electrodes

Flux-Cored Welding Wires target chrome-moly applications.

-Provide superior low temperature impacts -Provide significant productivity gains over stick or sub-arc welding -Three available wires for various chrome-moly grades TROY, Ohio. November 11, 2009-Hobart Brothers introduced a new patent-pending family of flux-cored welding wires designed to provide superior low temperature impacts and improve productivity on chrome-moly welding applications. The...

Read More »
Flux-Cored Welding Wires target chrome-moly applications.
Welding Rods, Wire and Electrodes

Flux-Cored Welding Wires target chrome-moly applications.

-Provide superior low temperature impacts -Provide significant productivity gains over stick or sub-arc welding -Three available wires for various chrome-moly grades TROY, Ohio. November 11, 2009-Hobart Brothers introduced a new patent-pending family of flux-cored welding wires designed to provide superior low temperature impacts and improve productivity on chrome-moly welding applications. The...

Read More »
Stainless Steel Electrodes weld wrought and cast alloys.
Electrodes

Stainless Steel Electrodes weld wrought and cast alloys.

Bare wire and covered stainless steel electrodes, Arcos 309/309L are available in dia from 0.035 - 3/16 in. Covered electrodes are offered in 3 different coatings, -15, -16, and -17 and in standard dia from 3/32 - 3/16 in., as well as non-standard dia up to 0.250 in. Arcos 309/309L bare wire (ER309/309L) and covered (E309/309L) units can be used for welding Type 304 and similar base metals. They...

Read More »
Stainless Steel Electrodes weld wrought and cast alloys.
Electrodes

Stainless Steel Electrodes weld wrought and cast alloys.

Bare wire and covered stainless steel electrodes, Arcos 309/309L are available in dia from 0.035 - 3/16 in. Covered electrodes are offered in 3 different coatings, -15, -16, and -17 and in standard dia from 3/32 - 3/16 in., as well as non-standard dia up to 0.250 in. Arcos 309/309L bare wire (ER309/309L) and covered (E309/309L) units can be used for welding Type 304 and similar base metals. They...

Read More »
Metal Cored Electrode suits robotic/automated applications.
Welding Rods, Wire and Electrodes

Metal Cored Electrode suits robotic/automated applications.

Endurance E70C-6M-H4 was developed to produce single, consistent wire surface that results in continuous, uninterrupted feeding and consistent arc starts even under difficult of conditions. Beads are smooth and well washed with even edges and minimal silicon islands. Electrode is available in 0.035, 0.045, 0.052, 1/16, 5/64, 3/32 and 1/8 in. dia. and can be used for heavy sheet metal fabrication,...

Read More »
Metal Cored Electrode suits robotic/automated applications.
Welding Rods, Wire and Electrodes

Metal Cored Electrode suits robotic/automated applications.

Endurance E70C-6M-H4 was developed to produce single, consistent wire surface that results in continuous, uninterrupted feeding and consistent arc starts even under difficult of conditions. Beads are smooth and well washed with even edges and minimal silicon islands. Electrode is available in 0.035, 0.045, 0.052, 1/16, 5/64, 3/32 and 1/8 in. dia. and can be used for heavy sheet metal fabrication,...

Read More »
Welding Electrodes suit power generation industry components.
Electrodes

Welding Electrodes suit power generation industry components.

Developed for welding components that operate at elevated temperatures, bare wire (ER90S-B9) Arcos 90S-B9 is available in diameters from .035 to 3/16 in. and is suited for use in power generation facilities as well as coal plants and oil refineries. Covered (E9015-B9) Arcos 9015-B9 is designed for high chromium alloyed 9CrMoNbV steel and can be used for welding heavy wall components such as...

Read More »
Welding Electrodes suit power generation industry components.
Electrodes

Welding Electrodes suit power generation industry components.

Developed for welding components that operate at elevated temperatures, bare wire (ER90S-B9) Arcos 90S-B9 is available in diameters from .035 to 3/16 in. and is suited for use in power generation facilities as well as coal plants and oil refineries. Covered (E9015-B9) Arcos 9015-B9 is designed for high chromium alloyed 9CrMoNbV steel and can be used for welding heavy wall components such as...

Read More »
Nickel Flux Cored Electrode withstands harsh environments.
Welding Rods, Wire and Electrodes

Nickel Flux Cored Electrode withstands harsh environments.

Developed for welding applications requiring corrosion and oxidation resistance, SelectAlloy 82-AP features weld metal composition of 19% chromium, 3% manganese, 2.5% niobium, and nickel balance. It is utilized for welding alloys 600, 601, and 800 to themselves, for clad side of joints in steel clad with nickel-chromium-iron alloys and for dissimilar welding of nickel-based alloys. Electrode...

Read More »
Nickel Flux Cored Electrode withstands harsh environments.
Welding Rods, Wire and Electrodes

Nickel Flux Cored Electrode withstands harsh environments.

Developed for welding applications requiring corrosion and oxidation resistance, SelectAlloy 82-AP features weld metal composition of 19% chromium, 3% manganese, 2.5% niobium, and nickel balance. It is utilized for welding alloys 600, 601, and 800 to themselves, for clad side of joints in steel clad with nickel-chromium-iron alloys and for dissimilar welding of nickel-based alloys. Electrode...

Read More »

All Topics