Welding Monitors

Welding Monitors

Weld Purge Monitor measures residual oxygen levels.

Argweld® Critical Weld Purge Monitor measures residual oxygen levels as low as 0.001% in inert weld purge gases. Automatic pump extracts gas samples, and device is menu-driven by 2 adjustable buttons. Internal alarm alerts operator if oxygen level rises above preset limit, and system's low-maintenance sensor has 5 yr life expectancy. Monitor can be used and interfaced with all manual and...

Read More »
Welding Monitors

Purge Monitor is designed for welding applications.

Argweld® Weld Purge Monitor, MKV version, provides welders and QC personnel with information about Oxygen content in vicinity of weld joints. This allows optimization of welding conditions while minimizing rejects as well as gas and time consumption. Each monitor comes with stainless steel sampling probe, 2 m length of rubber hose, vacuum sampling hand pump, and carrying strap. It can be...

Read More »
Welding Monitors

Scarf Monitoring System uses phased array technology.

Weld profile visualization system delivers online, real-time picture of scarfed ERW pipe IDs and ODs during manufacturing process. By identifying events such as tool drift and edging as they occur, system makes it is possible to affect real-time control of scarfing process and reduce scrap. Ultrasonic phased array transducer electronically simulates scanning action required to provide weld...

Read More »
Welding Monitors

Weld Purge Monitor

A British-made Weld Purge Monitor, said to be technically more advanced than its predecessors and more cost-effective, provides precise indication of the oxygen content of weld purge gas. The Argweld MKV weld purge monitor, from Huntingdon Fusion Techniques Limited, allows welding to begin as soon as the correct oxygen level is reached, without the need for any estimation or guesswork. It can be...

Read More »
Monitors sense tip loss in resistance welding cells.
Welding Monitors

Monitors sense tip loss in resistance welding cells.

DeltaPoint® tip-loss monitors with DeviceNet interface feature vortex shedding flowmeters that measure water flow in and out and compare flow rate and temp. Device can monitor 13 welding tips and will alert robot to stop welding if leak is detected. Monitors accommodate cooling flows to 12 gpm and water temp to 230°F. Featuring remote shutoff and restart, device is programmable for...

Read More »
Welding Monitors

Monitoring System ensures consistent weld quality.

Offering current/voltage and/or ultrasonic control, Model PSQ 6000 provides non-destructive testing for medium-frequency applications in automotive welding and assembly lines. By measuring current and voltage, course of resistance and energy can be recorded, controlled, and evaluated during welding. Ultrasonic monitoring system consists of XQR control board, UDM signal processor, and ultrasonic...

Read More »
Welding Monitors

Weld Purge Monitor features screw thread sensor housing.

Built and calibrated at weld purging concentrations of oxygen, Mark V ensures accuracy for welding of stainless steel and exotic metals. Back-sealed oxygen sensor ensures that only gas from purge volume is contacting chemical cell. Integrated PCB and display is free from loose, soldered wires that can lead to electronic failure. Unit includes protective enclosure, reinforced LCD display, and...

Read More »
Resistance Weld Monitor alerts users to exceeded limits.
Welding Monitors

Resistance Weld Monitor alerts users to exceeded limits.

Programmable monitor immediately warns resistance welding manufacturers if process drifts beyond acceptable limits. Accessible fault output and reset input facilitate integration with PLCs and other automated systems. Basic unit checks profile of secondary current, secondary voltage, resistance, and power for each weld and turns on built-in red alarm light if limits are exceeded. Monitor can be...

Read More »
Welding Monitor detects out-of-limits resistance welding.
Welding Monitors

Welding Monitor detects out-of-limits resistance welding.

WeldAware(TM) warns resistance welding manufacturers immediately if process drifts beyond acceptable limits. Unit is programmed by turning keyswitch to teach position and making welds. Accessible fault output and reset input allow integration of monitor with PLCs and other automated systems. Basic unit checks profile of secondary current, secondary voltage, resistance, and power for each weld and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers