SPIRALIFT® SL
Grinders

SPIRALIFT® SL

Dependable Fine Screening, Washing, Compacting The SPIRALIFT SL provides fine screening, washing, transporting and compacting of wastewater solids while leaving essential organics in the flow. The SL is easy to install in existing channels, reduces solids disposal costs and protects downstream equipment. The SPIRALIFT is provided as a fully integrated system including a shaftless screw screen, a...

Read More »
Engine Driven Welder Generator delivers 12 kW of power.
Welders

Engine Driven Welder Generator delivers 12 kW of power.

Available with CAT, Perkins, or Deutz diesel engines, Big Blue® 300 Pro CC/CV provides 20-410 A CC/DC and 14-40 V CV/DC welding output, with arc stability in TIG, Stick, MIG, flux cored, and carbon arc gouging processes. Circuit board is protected by Vault, hermetically sealed aluminum case that is impenetrable to dust, salt, and moisture. Rated for high temperatures up to 104°F,...

Read More »
Flux-Cored Wire is designed for welding high-strength steels.
Welding Rods, Wire and Electrodes

Flux-Cored Wire is designed for welding high-strength steels.

Suited for welding A515, A710, EQ56 and similar HSLA and Q&T steels found in offshore and structural applications, Hobart® FabCO® 107G all-position, gas-shielded welding wire offers tensile strength in 100-110 ksi range in as-welded or post-weld heat-treated condition. It has stable arc for optimal beam profile, produces low spatter, and has easy-to-remove slag. Available in 0.045 and...

Read More »
Nickel Based Electrode resists crevice corrosion and pitting.
Welding Rods, Wire and Electrodes

Nickel Based Electrode resists crevice corrosion and pitting.

Available in .045 and 1/16 in. dia, SelectAlloy C276-AP is developed to weld nickel-chromium-molybdenum to itself or to other nickel-based alloys. It is composed of 16% molybdenum, 15.5% chromium, 5.5% iron, 4% tungsten with balance of nickel and with low carbon. Gas-shielded, flux cored electrode provides flat, well washed beads with minimal weaving and is also used for surfacing steel and for...

Read More »
Generator/Compressor Set minimizes floor space usage.
Generators

Generator/Compressor Set minimizes floor space usage.

Measuring 78 x 30 x 60 in., generator compressor units conserve space and weight by combining two machines into one. Vertically-oriented design option places gen-set on framework over fuel or air tank, enabling compressor to be belt-driven below crankshaft. Powered by 1,800 rpm Kubota diesel engine, units are available from 10-50 kW with 20-100 cfm of air. Schulz compressor is standard, but...

Read More »
Welder/Generator/Air Compressor includes battery charger.
Welders

Welder/Generator/Air Compressor includes battery charger.

Available with internal 12/24 V battery charger and jump starter, Trailblazer® 302 Air Pak(TM) welds at up to 350 A, and provides 13,000 W of Accu-Rated(TM) generator power, 26 cfm compressed air, and 450 A of battery jumping power. Charger delivers power until it senses load from starter to eliminate battery failure. Driven by 30 hp Kohler gas engine, 59½ x 20 x 34¼ in. welder provides...

Read More »
Welding Rods, Wire and Electrodes

Stainless Steel Welding Consumables

Manufacturers and Fabricators take advantage of online sourcing and purchasing options. Orangeville - Stainless Steel Direct recently added a full line of stainless steel welding consumables manufactured by leading U.S. company Arcos Industries. Stainless Steel Direct will be offering its existing and future client base a convenient way of purchasing high quality stainless steel welding...

Read More »
Heaters

Inductoheat Technology Spotlight 2010

Inductoheat, an Inductotherm Group Company, is dedicated to providing customers high-quality induction heat treating and forge heating equipment. Our innovation in induction power supplies more than 40 years ago is the foundation for the development of breakthrough technology today. Our new products incorporate flexible, modular design and are built with lean manufacturing principles. With the...

Read More »
CoroMill 490 Now Offers 10mm Depth of Cut
Other Milling Cutters

CoroMill 490 Now Offers 10mm Depth of Cut

CoroMill 490, the milling cutter that can shoulder mill, face mill, edge, contour, slice, slot, in all materials, can now take up to 10mm depth of cut. The latest release in the CoroMill 490 family from Sandvik Coromant is a 14mm insert designed for larger depths of cut and engagements up to 10mm. The new insert size is introduced in an extensive program of cutter bodies in diameter range...

Read More »
Testers

Fine-Wire Probe Tip lends to enhanced signal integrity.

Measuring voltage versus adjacent local ground or other node on DUT, N2884A InfiniiMax differential wafer probing solution lets R/D and test engineers debug and test high-speed active ICs using oscilloscope. It uses ZIF probe head technology, which provides flat frequency response over entire 12 GHz bandwidth specification, while tip eliminates distortion and loading that affect probes with...

Read More »

All Topics