Sandvik Coromant Introduces GC1040 Milling Grade for Stainless Steels
Inserts

Sandvik Coromant Introduces GC1040 Milling Grade for Stainless Steels

Sandvik Coromant has announced its GC1040, a new milling grade that is available as of October 1, 2010. The grade has been designed to perform securely with consistently sharp cutting edges, low forces and slow wear, even in the extremely tough machining of austenitic stainless and duplex materials. As the Sandvik Coromant first-choice recommendation for shoulder milling with small diameters in...

Read More »
Stainless Steel Electrodes resist corrosion in severe conditions.
Welding Rods, Wire and Electrodes

Stainless Steel Electrodes resist corrosion in severe conditions.

Composed of 19.5% chromium, 13% nickel, 3.5% molybdenum, and max carbon content of 0.04%, SelectAlloy 317L welds Types 316 and 317 stainless and is suited for applications involving solutions of sulfuric acid and sulfur bearing gases. SelectAlloy 347, designed for welding Types 321, 347, and 348 stainless, has nominal weld composition of 19.50% chromium, 10% nickel, and 0.6% columbium. Both...

Read More »
Welding Supplies

Plasma Arc Welding Accessory Kits allow users to fine-tune systems.

Plasma Arc Welding Accessory Kits include components such as replacement shield cups, back caps, pre-ground electrodes, shield cup gaskets, and long tips. Available in standard or deluxe versions, products are labeled with custom-made lid card that identifies each component for easy access. Kits are assembled in ruggeded box and they also includes a guide for optimizing plasma arc welding torches.

Read More »
Miller to Showcase New Welding Equipment, Technologies and Accessories at FABTECH 2010
Helmets

Miller to Showcase New Welding Equipment, Technologies and Accessories at FABTECH 2010

Market-segmented booth (#6811, Hall C) matches welding solutions to specific applications and industries. New products and technologies increase ease-of-use, reduce operator fatigue and improve weld quality and operator safety. Highlights/Key Facts o FILTAIR(TM) SWX-Series wall-mounted fume extractors reduce shop floor clutter while removing over 95 percent of weld fume particulates. o Big...

Read More »
Welding Supplies

Non-Rotating MIG Wire Reel offers no-tangle payoff.

Available for Lincoln premium copper-coated SuperArc® MIG wire line, Precise-Trak(TM) reel incorporates wire winding technology that provides consistent wire placement and optimal joint tracking for no-tangle payoff. Precise wire placement also decreases weld defects caused by wire wander, while virtually unlimited stacking ability increases floor space. Areas of use include automatic and...

Read More »
Consulting Services

New Equipment Validations Warranted

(Marietta, OH) New chamber validations performed by Caron validation engineers include a one year warranty, consistent with the chamber. "Unlike other independent validation companies, we offer a full year warranty on our validations when you purchase them in conjunction with new units," Jim Lang, Service & Quality Manager said. "The validation warranty gives customers peace of mind for the new...

Read More »
Hurricane Preparedness Includes Planning for Emergency Generator Power
Welders

Hurricane Preparedness Includes Planning for Emergency Generator Power

Top 10 reasons why gas welder/generators built to industrial specifications offer the best value for emergency generator power. Gas welder/generators, shown here connected to a transfer switch for safe operation, can run up to 14 hours before refueling during emergency power situations. Welder/Generator Key Facts Available at welding supply distributors. Up to 12,000 watts of power. Strong motor...

Read More »
Screens

Stainless Steel Filter Screens tolerate demanding environments.

Filter screens area avaiable made from 0.001 in. thick stainless steel with 0.002 in. diameter holes. Applications include screen print stencils, hydraulic valves, medical devices, particle separation, sugar filtration, and various other critical filter processes. Stainless steel screens are photochemically etched from solid piece of stainless steel, which provides dimensional stability and...

Read More »
AC Welder Generator targets transmission pipeline welding.
Welders

AC Welder Generator targets transmission pipeline welding.

Big Blue® 350 PipePro welder/AC generator provides 20-400 A for DC Stick and DC TIG welding, 14-40 V for MIG and Flux Cored welding, and 12,000 W peak/10,000 W continuous auxiliary generator power for on-site tools. Designed for use in harsh conditions, unit features Infinite Arc Control that allows arc characteristics to be tailored to applications in Stick, MIG, and Flux Cored welding. It...

Read More »
Welding Rods, Wire and Electrodes

Redesigned Welding Wire from Hobart Brothers Excels on Vertical Down Pipe Applications

o Provides excellent weld puddle control o Eliminates burn through o Offers good wetting action TROY, Ohio. - To improve vertical down welding performance and provide welding operators with greater control on on-shore transmission pipeline applications, Hobart Brothers offers its new Hobart® Fabshield® 81N1+ self-shielded flux-cored wire. The wire has been redesigned specifically for...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers