Welding Helmets offer digital controls, ergonomic headgear.
Arc Armor® Digital Elite(TM), Digital Performance(TM), and Digital Pro-Hobby(TM) Series auto-darkening welding helmets are available with digital controls that facilitate shade, delay, and sensitivity adjustment for welder, even when wearing gloves. Promoting comfort and accommodating personal preferences, headgear conforms to wearer's head and offers 6 points of adjustment. Integrated...
Read More »
All-In-One Coil Joiner is suited for roll forming operations.
Able to service multiple converting lines, Infinite Web® delivers non-contact splicing that incorporates laser cutting and welding with single head. Features enable splicing of titanium coils and splicing on 15° bias as alternative to forming perpendicular joints; bias increases splice strength by increasing material at weld joint. Handling material thicknesses from 0.002-0.040 in.,...
Read More »Sonobond Introduces a New Video About the Dual Head SpliceRite
The 2 1/2-minute presentation can be seen at www.SonobondUltrasonics.com. Viewers can watch an ultrasonic weld being made. They'll also learn that Sonobond has the only ultrasonic welding technology able to effectively accommodate wire bundles that are tinned or oxidized. WEST CHESTER, Pennsylvania - Sonobond Ultrasonics announced today that it has produced a short video about its unique...
Read More »
Lincoln Electric Delivers Welding Hard Automation Options to Wind Power Industry
Arc Products(TM) weld tracking and positioning systems precisely position arc and track joints for wind tower section fabrication Cleveland - Joint tracking and positioning systems from Arc Products(TM), a Lincoln Electric company, deliver precise joint tracking and positioning for submerged arc or GMAW arc welding processes. Products include Seam Tracker(TM) Systems for precise automated weld...
Read More »
The Engineer's Guide to Test Chambers
This paper serves as a tutorial for an engineer selecting an environmental chamber for testing a new product under various environmental conditions, and provides guidelines for equipment selection based on a given set of application requirements. It begins with the study of selecting chamber size and facility constraints, followed by chamber design considerations for selection. The different types of cooling systems performing primary cooling function or providing a boost capability to assist a mechanically refrigerated system are discussed, followed by chamber performance calculation. An analysis about different types of humidity systems with respect to test requirements is provided. Finally, the paper lists standard customization options available for test chambers, and provides a quick chamber reference chart along with information relating to general shipping and installation.
Read More »Hobart Brothers Receives CE Mark for Additional Filler Metals
TROY, Ohio -- Hobart Brothers announced that has received the CE (ConformitÃ-© Européenne or European Conformity) Mark for two more of its filler metals. The Hobart® TM-881K2 and Hobart TM-791 gas-shielded flux-cored wires in 1.2 mm (.045 inch) diameters now both meet the strict safety and health requirements necessary for them to be sold and used in European Union (EU)...
Read More »
Implementing Lead-Free Soldering with Cost Reduction and Reliability
Nihon Superior to Offer Voiding Reduction and Aluminum Soldering at Jisso Protec 2012 OSAKA, JAPAN - Nihon Superior Co., Ltd., a supplier of advanced soldering materials to the global market, announces that it will showcase a new, expanded range of products at Jisso Protec 2012, which will be held at the Tokyo Big Sight from June 13-15, 2012. These products are based on the company's well-known...
Read More »
Welding Wire suits shipbuilding and general fabrication.
Delivering flat bead face when used in all positions, UltraCore® HD-M is 75% Argon/25% CO2 gas-shielded flux-cored wire that features fast freezing slag and provides deposition rates of more than 10 lb/hr. Wire is available in 15, 33, and 50 lb packages and in standard diameters of .045, .052, and 1/16 in. UltraCore® HD-M conforms to AWS A5.20/A5.20M: E71T-1M/9M-H8 classification and...
Read More »Sonobond's American-Made Ultrasonic Metal Welders are Tough Enough to Survive Even an EF-5 Tornado
Two Sonobond machines-a SpliceRite(TM) Ultrasonic Wire Splicer and a SonoWeld® 1600 Ultrasonic Metal Spot Welder-remained operational after a devastating storm demolished the production area of SolaHD's Rainsville, Alabama facility. WEST CHESTER, Pennsylvania - Sonobond Ultrasonics announced today that two of its ultrasonic metal welders survived the full force of the tornado that...
Read More »Braze Rings provide visual verification of sound braze joint.
Targeting HVAC/R contractors, installers, and technicians, Sil-Fos® 15 Rings are designed for brazing copper tubular components in HVAC/R installation applications. Rings use calculated alloy volume for use with standard size copper tube from Â-¼-1 1/8 in. and lend to consistent and repeatable joint quality while controlling alloy usage. Witness line of alloy at exterior joint ensures...
Read More »
New Technologies for Challenging Workpieces
Increasing demands made on precision and the push for the decrease of price of modern components is pushing traditional manufacturing processes to their limits. From September 10th-15th, 2012 at IMTS in Chicago, IL, EMAG will present three production technologies that complement or replace traditional processes such as turning, milling and grinding. PECM for nickel- and titanium-based alloys With...
Read More »
Solve Any Large-scale Water Control Problem with the Aqua Dam Flood Barrier
Aqua Dam is the ultimate solution for large-scale water control projects. It combines lightweight, large size, and portability all in one innovative product. To learn more about the uses, and applications of Aqua Dam, or to see it in action, check out our new video to get all the details.
Read More »
