Laser Cutting Head facilitates unattended operation.
FASTLaser Model LH1575 utilizes Flow Accelerated Screen Technology, which delivers optimum gas flow directly to cut zone, consistently matching beam width and gas flow geometry. FAST technology also minimizes sensitivity to common plate fabricating conditions and variables such as plate chemistry and plate condition. Cutting head offers no-tool lens change and focal length change of 5.0-7.5 in....
Read More »Flux-Cored Wires are used for mild steel welding.
Offered in 6 types, UltraCore gas-shielded, flux-cored wires deliver smooth and stable arc performance. ProTech foil bag packaging minimizes moisture and increases resistance to cracking and gas tracking. General-purpose UltraCore 71A75 Dual is used with straight CO2 or mixed gases, UltraCore 712A80 (E71T-12) offers impact resistance, and UltraCore 71A85 (E71T-1) works with high argon mixed...
Read More »
Servo Welding Actuator has zero maintenance design.
Offered in roller screw or ball screw models, SW Series has rated life at weld force exceeding 10 and 5 million cycles, respectively. Products incorporate 8-pole Nd-Fe-B hollow core rotor with skewed stator laminations. Design results in force repeatability of Ã-
Read More »
Pipe Cutting System cuts wall thicknesses up to schedule 40.
Pipe Branching System 8 (PCS 8) cuts tube and pipe up to 8 in. in less than 1 minute. It can cut steel, stainless, copper, soil pipe, and plastics cleanly. Cut is square enough to allow orbital welding without any further pipe preparation.
Read More »
Hot Forging Process
Check out this white paper to learn about the benefits of hot forging.
Read More »
End Prep Cutter Blades cut without fluids.
MILLHOGÃ-® Cutter Blades feature radical chip breaker to direct chip away from tube surface and minimize heat generated. Made from T-15 tool steel and titanium nitride-coated for added lubricity, blades can cut stainless steels, P-91, and other hard materials without fluids. Capable of beveling, facing, and boring simultaneously, MILLHOG Blades are available in any angle of end prep including...
Read More »
Welders are used for spot and projection welding.
Featuring force range of 675-1,055 lb, 24 in. throat rocker arm welders are offered with 25, 30, and 50 KVA ac transformers. With force range of 1,000-4,045 lb, RWMA Size 0-3 press welders have ac transformers rated from 50-250 KVA. Press welders rated 80, 100, and 150 KVA, as well as 50 KVA rocker arm welder, are stocked with 440 V primary power. Product line can also be customized to...
Read More »
Aluminum Welding Wire suits general-purpose applications.
Used with 100% argon shielding gas, Smootharc(TM) 4043 and 5356 meet AWS A5.10 requirements. Both alloys are available in .035, 3/64, and 1/16 in. dia sizes and 1 or 15 lb spools as well as in 1/16, 3/32, and 1/8 in. dia cut lengths for TIG welding. TIG filler metals are supplied in 36 in. lengths with alloy number stamped on each end. Uses include heat exchangers, food manufacturing equipment,...
Read More »
Safety Glasses provide distortion-free viewing.
Worn alone or as primary eye protection under welding or grinding helmets, Torch WearÃ-® safety glasses employ XYZ OpticsÃ-® to maintain visual clarity at all angles. Lenses, milled from solid plastic blanks, have contour mapped to human eye. Offered with clear or high-intensity yellow lenses, each pair of glasses meets ANSI Z87.1-2003 safety specifications and comes with Microclear(TM)...
Read More »
Interlocks feature interchangeable inserts.
Providing accurate alignment of plastic mold halves, Series IN2(TM) INovative INterlocks utilize interchangeable inserts, eliminating need to replace entire side interlock set during maintenance. Graphitic steel inserts are held in place with interference-fit design that retains them when interlocks are installed on mold. There are no coatings, which could peel away under severe conditions.
Read More »
Solid Welding Wires provide smooth, stable arc.
Copper-coated, mild steel Models ER70S-6 and ER70S-3 are available in .035, .045, .052, and 1/16 in. diameters and designed for use with 100% CO2 or Argon-rich shielding gases. Consistent wire feed and stable arc help eliminate weld discontinuities, making wires suited for high-duty cycle applications including general fabrication, automotive, structures, pressure vessels, pipe, and railcars.
Read More »
Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics
Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.
Read More »
