New Welding Equipment & Supplies Products

Welder suits light industrial applications.

SyncrowaveÃ-® 200 AC/DC TIG/Stick welder provides 5-200 A output power (150 A at 40-percent duty cycle), enough to weld Ã-¼-in. aluminum with ac TIG. Single-knob adjustment controls pulse rate from 1-15 pulses/sec, and Syncro-Start(TM) technology allows operators to choose soft, standard, or hot starting, depending on material thickness and tungsten diameter. Syncrowave 200 comes with...

Threaded Tube Inserts are offered in metric sizes.

Aluminum Threaded Tube Inserts serve as end plugs in tubing, enabling them to be fitted with threaded leveling feet. Inserts are fitted with mallet and are designed to bridge internal diameter tolerance of Ã-

Welder/Generator suits construction, pipe, and fleet work.

Powered by 4-cylinder, water-cooled, 1,800 rpm PerkinsÃ-® diesel engine, VantageÃ-® 400 provides 400 A of dc welding output, 19,000 W peak 3-phase ac generator power, and 12,000 W peak 1-phase ac auxiliary power. Housed in corrosion-resistant stainless steel case, unit includes Lincoln Chopper Technology(TM) for smooth arc, and Voltage Regulation Device(TM), which allows operator to...

Microgage Kit checks and aligns production equipment.

Microgage Complete Alignment Kit provides precise measurements of machinery straightness, parallelism, surface flatness, and squareness as well as bore and shaft alignment. It includes laser transmitter and digital receiver connected to handheld LCD display, which presents alignment units in 0.001 or 0.0001 in. increments or in millimeters. Kit also includes rotating base for setting and checking...

Grips and Handles - Providing a Strong and Comfortable Grip

To learn more about the different types of Grip and Handle options available or which to select for your specific application, download our product guide.

Chromium-Molybdenum Electrodes weld 9Cr-1Mo alloyed steels.

Gas-shielded, flux cored electrodes, Select 810-B8 and Select 910-B9, are all-position wires that feature uniform weld beads with good tie-in as well as smooth and stable arc transfer. Both products eliminate defects such as lack of fusion and tolerate mill scale and rust. Select 810-B8 is utilized to weld 9Cr-1Mo alloyed steels involved in high-temperature service, while Select 910-B9, which...

Friction Welding System features servo-driven weld head.

Designed for small part joining to broad range of part configurations and dissimilar materials, Model FWS-30 provides rotational speeds from 12,000-23,400 rpm and forging forces from 335-3,125 lbf. Friction weld head can accept parts with footprint up to 30 mm. System produces forge-quality welds with little or no diffusion area. It can be designed as stand alone machine, integrated into work...

TIG Inverters deliver 5-700 A of weld power.

Eliminating inclusions and weld flaws, DynastyÃ-® 700 and MaxstarÃ-® 700 produce output of 500 A/40 V at 100% duty cycle and feature Auto-Line(TM) power management technology, which allows them to accept any primary power from 208-565 V, singe or 3-phase, 50/60 Hz. Dynasty 700 provides ac/dc welding output, while Maxstar provides 700 dc-only output. Units permit pulsing at dc TIG...

Fine Screen employs European step bar technology.

ScreenMasterÃ-® ST, constructed of stainless steel, comes in various widths, heights, and screen openings to promote optimal degree of solids separation to meet application requirements. As solids accumulate into mat on screen, level sensor is activated, and unit is energized. Motor reciprocates bars, incrementally moving material up bar screen steps. When they reach top, solids fall off into...

Torch Cleaning Station cleans robotic welders.

FS3 Torch Cleaning Station has 3-position cleaner that can clamp torch, ream nozzle, and spray in under 4 sec. During operation, robot moves welding gun into position for cleaning. Product's adjustable clamp holds nozzle in place, and reamer begins cleaning built up splatter. Once splatter is removed, mist of anti-splatter solution is applied to nozzle. Optional wire cutter can be added to trim...

Cutoff Inserts are available in 4 mm size.

Designed to aid in chip management, MTC-SEPARATOR Xtra (MTC-SX) Cutoff Inserts are available in 4 grades: M40 (-36), M43 (-13), M45 (-33), and M93 (-34). Each incorporates double V design that lends to stability as well as application-specific geometry that lends to surface finish quality and minimizes cutting pressure. Also available, MTC-SX-Ultra inserts feature application-specific geometry...

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.