Wire Feeders come in single and dual benchtop models.
Welders

Wire Feeders come in single and dual benchtop models.

70 Series provides reliable arc control in heavy and high-volume manufacturing, metal fabrication, and construction applications. Units are compatible with any CV welding power source with 14-pin receptacle and 24 Vac supply. Models 74S (standard), 74D (digital meters), and 74DX (deluxe, full-featured) include automatic run-in and trigger hold. All models include tool-less rotatable drive...

Read More »
Power System incorporates welder into boom lifts.
Welders

Power System incorporates welder into boom lifts.

SkyWelder(TM) system features Miller(R) Model CST 250 welder, which has 5 to 250 amp range and can be used for stick and TIG welding applications. Power leads run through boom's power track to 7,500 W generator mounted in engine compartment which supplies power to welder and to 110 Vac platform receptacle. Welder is integrated into boom lift's platform beneath the control panel. Available...

Read More »
Welding Wire suits pulverizer rebuilding applications.
Welding Rods, Wire and Electrodes

Welding Wire suits pulverizer rebuilding applications.

Stoody(R) CP2000 open arc-welding wire, composed of chromium-carbide alloy, can be applied to carbon, low alloy, and manganese steels. Stoody CP-2000 has hardness HRC of 58-64, and is suitable for hot-wear applications up to 900 deg F. Model with 7/64 in. dia has 400 to 650 amperage range and voltage range of 28 to 32. Model with 1/8 in. dia wire has 450 to 650 amperage range and voltage range of...

Read More »
Alternator provides power for stick welding.
Power Supplies

Alternator provides power for stick welding.

Power-Plus(R) Exciter(TM) TA-6/200-KBC provides 5.5 kVA of 115/230 Vac auxiliary power, 200 dc amps @ 60% duty-cycle welding output, and 12/24 V battery charger. Separate windings are used for welding and auxiliary power. Generator is powered by 15 hp, 1-cylinder, gas fueled, air-cooled engine. Alternator provides smooth weld output for STICK or scratch-start dc TIG welding applications. It fits...

Read More »
Portable DC Inverter offers constant-current output.
Power Supplies

Portable DC Inverter offers constant-current output.

Single-phase, 230/460 Vac, 50/60 Hz P-Wee(R) 250 GTS power source is designed for STICK, high frequency TIG, and Lift Start TIG welding applications. It includes adjustable hot start and automatically adjusts arc control for smooth operation with all electrodes. Standard controls include gas valve, built-in sloper, spot timer, pulser, and high-frequency starting. Fixed preflow is provided and...

Read More »
Inverter Welding System suits MIG and flux-cored welding.
Welders

Inverter Welding System suits MIG and flux-cored welding.

Power Wave(TM) 355/Power Feed(TM) 10 Welding System is comprised of digitally-controlled inverter power source and industrial wire feeder. It provides control of welding parameters and allows user to select welding output waveform using Mode Selector Switch. Inverter offers 350A at 60% duty cycle. Power Feed 10 features 4-driven rolls in heavy duty drive system for feeding every wire type. Guide...

Read More »
Welding Travel Carriage is battery powered.
Welding Supplies

Welding Travel Carriage is battery powered.

BUG-GY-VERT welding travel carriage has 14.4 V rechargeable battery and magnetic base, and will carry welding torch in flat and vertical positions. It uses guide arms to track and steer into fillet joint and has torch oscillator that allows unit to perform weave welds. Constant travel rate and precise path control increases welding production, improves weld quality, and decreases welder's fatigue.

Read More »
Power Supplies

Welding Inverter communicates internally via DeviceNET(TM).

PC- and PDA/Palm(TM)-compatible Auto Invision(TM) 6500 power supply automatically identifies robots and calibrates appropriately. DC welding output varies from 5 to 1170 A with 100 percent duty cycle rating of 675 A, 44 V. It performs MIG, pulsed MIG, adaptive pulsed MIG, and flux cored welding for robotic and fixed automation systems. Unit offers 1/4-turn, quick connector, Auto-Line(TM)...

Read More »
Optical Taps

Optical Jumper provides network monitoring.

Integrated optical/tap jumper can be utilized in any optical transport network such as voice, video, and data systems with optical signals. Tap/monitoring port can be added to any standard patch panel within existing network with no additional frame space. Jumper is also suitable for wavelength division multiplexing and optical power splitting applications.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers