Welding Wire is rated for earthquake-prone areas.
Welding Rods, Wire and Electrodes

Welding Wire is rated for earthquake-prone areas.

Classified under AWS A 5.20-95, Coreshield® 6 E70T-6 flux cored wire is suitable for bridge and structural applications in seismic areas. It meets FEMA 353 specs for welding in earthquake-prone regions. Wire provides smooth and stable arc, low spatter, easy-to-remove slag, and lower fume generation level. Coreshield 8 exhibits same characteristics as Coreshield 6, but is for all position...

Read More »
Cutting Inserts improve efficiency and productivity.
Inserts

Cutting Inserts improve efficiency and productivity.

Aluminum Cutting Inserts are available in WCGT 05 and WCGT 06 sizes to mount into existing OTM HOLESHOT(TM) and HOLESHOT(TM)-IS (Integral Shank) drills. Available in grade 12, inserts feature highly polished surfaces and up-sharp geometry for drilling aluminum. Their polished surfaces reduce coefficient of friction for drilling in soft, gummy material.

Read More »
Cable Jacket is PVC laminated.
Shielding

Cable Jacket is PVC laminated.

DVH-20 jacketing is constructed from medium-weight, flame-retardant PVC, laminated to both sides of polyester cloth. Reinforced construction provides resistance to wear, tears, and abrasion. Operating temperature is -40 to +85 deg C. Jacket is available for flat or round cable bundles from 3/8 to 4 in. in variety of colors.

Read More »
Primer-Free Threaded Inserts resist galvanic corrosion.
Inserts

Primer-Free Threaded Inserts resist galvanic corrosion.

Stainless steel Heli-Coil inserts, manufactured to military and metric aerospace standards, eliminate need for applying zinc chromate primer. Resin-bonded, fluoropolymer coating creates barrier between insert and parent material. Coating also provides additional lubricity, easing installation in anodized and chemically treated holes and allowing for consistent prevailing torque with screw-lock...

Read More »
Sponsored

New Aeroflex Digital Signal Generator Eases Multi-Carrier Power Amplifier Testing

The paper focuses on the capabilities of the IFR 3410 Series digital RF signal generators from Aeroflex and their ease of use in testing multi-carrier power amplifiers (MCPAs) for 2G and 3G wireless systems. It lists the features of the IFR 3410 series including its 2, 3, and 4 GHz models, explains the operation of single carrier and multi-carrier power amplifiers with the help of illustrations, and the typical method of testing 2G and 3G MPCAs using diagrams and graphical representations. Easy operation enabled by the IFR 3410 Series' touch screen is stated, illustrating the use and benefits of IQCreator(TM), a software support package included with the instrument, and includes screenshots of the VSS Vector Signal Simulation waveform creation software from Celerity, which is also available with the IFR 3410 Series.

Read More »
Inserts

Inserts press into plastic without melting.

Series 50 through-hole and Series 51 headed, through-hole press-in brass inserts can be cold pressed into plastic without heat or ultrasonic equipment. Inserts have helical knurl that optimizes plastic migration, providing good pull-out and torque resistance. Inserts can be installed with arbor press or fully automated machine into ABS and polycarbonate plastics. Applications include securing...

Read More »
Wire Feeders come in single and dual benchtop models.
Welders

Wire Feeders come in single and dual benchtop models.

70 Series provides reliable arc control in heavy and high-volume manufacturing, metal fabrication, and construction applications. Units are compatible with any CV welding power source with 14-pin receptacle and 24 Vac supply. Models 74S (standard), 74D (digital meters), and 74DX (deluxe, full-featured) include automatic run-in and trigger hold. All models include tool-less rotatable drive...

Read More »
Power System incorporates welder into boom lifts.
Welders

Power System incorporates welder into boom lifts.

SkyWelder(TM) system features Miller(R) Model CST 250 welder, which has 5 to 250 amp range and can be used for stick and TIG welding applications. Power leads run through boom's power track to 7,500 W generator mounted in engine compartment which supplies power to welder and to 110 Vac platform receptacle. Welder is integrated into boom lift's platform beneath the control panel. Available on...

Read More »
Welding Wire suits pulverizer rebuilding applications.
Welding Rods, Wire and Electrodes

Welding Wire suits pulverizer rebuilding applications.

Stoody(R) CP2000 open arc-welding wire, composed of chromium-carbide alloy, can be applied to carbon, low alloy, and manganese steels. Stoody CP-2000 has hardness HRC of 58-64, and is suitable for hot-wear applications up to 900 deg F. Model with 7/64 in. dia has 400 to 650 amperage range and voltage range of 28 to 32. Model with 1/8 in. dia wire has 450 to 650 amperage range and voltage range of...

Read More »
Alternator provides power for stick welding.
Power Supplies

Alternator provides power for stick welding.

Power-Plus(R) Exciter(TM) TA-6/200-KBC provides 5.5 kVA of 115/230 Vac auxiliary power, 200 dc amps @ 60% duty-cycle welding output, and 12/24 V battery charger. Separate windings are used for welding and auxiliary power. Generator is powered by 15 hp, 1-cylinder, gas fueled, air-cooled engine. Alternator provides smooth weld output for STICK or scratch-start dc TIG welding applications. It fits...

Read More »
Portable DC Inverter offers constant-current output.
Power Supplies

Portable DC Inverter offers constant-current output.

Single-phase, 230/460 Vac, 50/60 Hz P-Wee(R) 250 GTS power source is designed for STICK, high frequency TIG, and Lift Start TIG welding applications. It includes adjustable hot start and automatically adjusts arc control for smooth operation with all electrodes. Standard controls include gas valve, built-in sloper, spot timer, pulser, and high-frequency starting. Fixed preflow is provided and...

Read More »

All Topics