Microscope-Based Welding Systems minimize rework time.
Welders

Microscope-Based Welding Systems minimize rework time.

Microwelding Systems enable user to see exactly where weld puddle is applied for repairing molds and dies and lets operator produce welds with less than 0.0005 in. of sink in heat affected zone. Featuring microscope and lighting for magnification needed to maintain arc necessary in low-amperage miniature TIG welding, systems include power supply, hot plates, micro-blasters, and all tools for pre-...

Read More »
Generator/Welder uses 3/32 and 1/8 in. diameter electrodes.
Electrical Power Generators

Generator/Welder uses 3/32 and 1/8 in. diameter electrodes.

Power Arc(TM) 5500 provides 5,500 W of surge ac generator power and 125 A of ac welding amperage. Welding capacity is delivered by Robin/Subaru® overhead cam engine, or Honda® overhead valve engine, both rated at 9 hp. Single-range output control lets user dial in correct weld settings, while built-in circuit breakers protect tools and unit from power overload. Enclosed in tube-frame...

Read More »
Welders are used for spot and projection welding.
Arc / Resistance Welders

Welders are used for spot and projection welding.

Featuring force range of 675-1,055 lb, 24 in. throat rocker arm welders are offered with 25, 30, and 50 KVA ac transformers. With force range of 1,000-4,045 lb, RWMA Size 0-3 press welders have ac transformers rated from 50-250 KVA. Press welders rated 80, 100, and 150 KVA, as well as 50 KVA rocker arm welder, are stocked with 440 V primary power. Product line can also be customized to...

Read More »
Materials Feeders

Welding System is available in various configurations.

Ready-Pak(TM) kits are available in 4 configurations with various power sources to meet application needs. All kits include LF-72 wire feeder featuring 2-roll MaxTrac(TM) drive system for accurate wire feeding. Other components are power source, drive rolls and wire guide, wire feeder control cable, welding gun, work lead and clamp, and Harris® Flowmeter/Regulator and gas hose. Two kits...

Read More »
Arc / Resistance Welders

Robotic Cell welds small- to medium-sized parts.

Dual, fixed-table eCell(TM) system is capable of MIG, Synergic MIG, MIG Pulse, and flux-cored arc welding procedures on parts that can be welded without reorientation. It welds variety of materials including steel, stainless steel, and aluminum. Digitally-controlled, 350 A inverter welding power source is capable of high-speed communication and is delivered with 60+ factory-programmed waveforms...

Read More »
Weld Guns

Welder offers spool-gun ready capabilities.

Model Power MIG® 255C provides continuous control over range of 30-300 A with rated output of 250 A at 40% duty cycle. Built-in electronics drive Prince® XL or Magnum® SG spool gun for aluminum welding capabilities, and 115 V auxiliary receptacle can power grinder or other equipment. Cast aluminum industrial wire drive system features dual driven rolls, numeric tension...

Read More »
Electrical Power Generators

Welder/Generator offers 5,500 W AC generator power.

Featuring Robin/Subaru® 9 hp EX 27 engine, Weldanpower® 125 provides DC stick welding power with 125 DC Amps for variety of projects and 5,500 surge watts of AC generator power for work lights, tools, and pumps. Unit is capable of welding steel, stainless steel, cast iron, or hardfacing projects. Tubular roll cage provides added protection and many lift handle points. Two people can...

Read More »
Welders

Welding Systems include guns, power supplies, and wire.

Equipped with spool gun control, single-phase MigMaster® 203 is rated at 200 A. Modular AristoMig(TM) 500 delivers 500 A at 60% duty cycle, and Super Pulse(TM) welding system provides TIG-like weld appearance. Python Gun, available in air- or water-cooled models, is rated at 200 and 400 A, respectively. Company also offers 653E cvcc Weatherguard Power Source, Coreshield(TM) self-shielded...

Read More »
Arc / Resistance Welders

Handheld Welder ultrasonically joins thermoplastics.

Model HSG features 1,000 W digital control with integrated time, energy, and power control capabilities. Programmable amplitude and RS232 port for data acquisition are standard. Welder offers 2 different grip options so users can select which angle is best suited to operation. Handle with integrated pistol type grip slips over converter housing of base unit without need for modifications or...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics