Electrical Power Generators

Welder/Generator is offered with Deutz engine.

With Deutz D2008L4 4-cylinder, water-cooled diesel engine, Vantage® 300 delivers dc welding output of 300 A at 32 V, 100% duty cycle. Engine runs at 1,800 rpm and is rated at 24 hp. It generates 12.5 kW peak, 3-phase, 240 Vac auxiliary power and 11.5 kW peak, single-phase ac auxiliary power. Fuel tank capacity of 15 gal enables Vantage 300 to run all day. Four process modes include...

Read More »
Resistance Welders handle small to medium sized parts.
Arc / Resistance Welders

Resistance Welders handle small to medium sized parts.

Available in 16, 32, and 48 in. widths with 16 in. upper and lower platen depth, M-Series welds various materials, including steel and stainless steel, and can incorporate multiple guns for custom resistance, spot, or projection welding. Small footprint offers mobility via forklift pockets and accessibility for tooling changeover. Features include X-Y servo driven fixtures and light curtains and...

Read More »
Hybrid Welding System combines laser with GMAW.
Arc / Resistance Welders

Hybrid Welding System combines laser with GMAW.

Hybrid Laser Arc Welding combines deep weld penetration and low heat input of laser welding with power efficiency and gap tolerance of GMAW (gas metal arc welding). Adding GMAW in tandem with laser and filler metal creates wider weld bead and enhances metallurgical stability. Mechanized system utilizes laser only, laser with cold wire fill, or hybrid laser arc welding in 2D gantry, 3D robotic, or...

Read More »
Automated Welding System combines flexibility and precision.
Welding Supplies

Automated Welding System combines flexibility and precision.

Column & Boom (CaB) series is offered in 3 models, each with different profile and working range from 2 x 2 m up to 10 x 8 m. Column is capable of ±180° rotation and travel speeds are pre-programmable. A2 or A6 welding heads are mounted to boom with swiveling mounting bracket, enabling external and internal longitudinal and circumferential welding. Equipped with different components...

Read More »
Energy Beam Welders

7500 Series FiberStar Fiber Diode Micro-Welding Workstation

7500 Series FiberStar Workstations offer a significant competitive advantage for today's medical device and micro component assembly marketplace. Fiber Diode technology produces a sharp, focused light beam that consistently melts a very small area of metal. The benefit of this technology is that very little heat is generated at the weld point allowing users to easily weld > 0,05mm from the most...

Read More »
Miller To Showcase New Plasma Cutter, TIG Welder, Helmet Designs and More at 2006 Fabtech International/AWS Welding Show
Electrical Power Generators

Miller To Showcase New Plasma Cutter, TIG Welder, Helmet Designs and More at 2006 Fabtech International/AWS Welding Show

APPLETON, Wis., 2006 Miller Electric (booth #23040) will showcase several new products, enhancements to existing products and a new Roadshow semi trailer-- a traveling welding and cutting exhibition, complete with classroom--at the 2006 Fabtech International/AWS Welding Show in Atlanta. New products on display will include the Sycrowave® 200 AC/DC TIG/Stick welder, the Spectrum® 1251...

Read More »
Weldcraft to Showcase TIG Welding Products at 2006 Fabtech International/AWS Welding Show
Arc / Resistance Welders

Weldcraft to Showcase TIG Welding Products at 2006 Fabtech International/AWS Welding Show

APPLETON, Wis., 25 July 2006-Weldcraft will showcase its TIG welding products in Booth # 24044 at the Fabtech International/AWS Welding Show in Atlanta, October 31 to November 2. Products to be exhibited include the company's upgraded WP17 Series of TIG torches, new (WP17, 18, 20 and 26) torch packages and a line of tungsten. Weldcraft's Legacy Series of TIG torches will also be on display....

Read More »
TIG Torch offers 70° and 180° head configurations.
Arc / Resistance Welders

TIG Torch offers 70° and 180° head configurations.

Suited for limited access joints, air-cooled Model WP-50 is rated at 60% duty cycle up to 50 A and offers pen-like control in tight quarters and on paper-thin material. Entire torch is 8Â-½ in. long and ¾ in. diameter at widest point, with 5/8 in. long x 3/8 in. dia torch head. Compatible tungsten sizes include .020, .040, and 1/16 in. diameters. Torch can be ordered with 12.5 or 25...

Read More »
Liburdi Dimetrics Corporation Release New 'Pure Fusion' Tube Welding Technology
Welders

Liburdi Dimetrics Corporation Release New 'Pure Fusion' Tube Welding Technology

July 2006 Using inter-level sloping pioneered by Dimetrics some 30 years ago, Liburdi Dimetrics Corporation have released a new enhancement of this tube welding technique to provide the simplest and smoothest heat delivery mechanism in orbital tube welding. Accurate and stable control of welding current delivers precisely the right amount of heat into an autogenous stainless steel butt weld to...

Read More »
Welder/Generators offer large horsepower engine options.
Electrical Power Generators

Welder/Generators offer large horsepower engine options.

Available with 23 hp Kohler and 22 hp Robin engine options, gas-powered Bobcat(TM) and Trailblazer® provide multi-process welding with simultaneous generator and welding capabilities. Units can produce 10,500 W of Accu-Rated peak power for minimum of 30 seconds. Trailblazer models include Auto-Crater feature, which eliminates craters when using dc TIG process. Bobcat and Trailblazer diesel...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers