HBS Introduces 2 New Inverter Stud Welders

February 1, 2009 HBS has increased their range of Inverter Technology stud welding equipment, adding a 2 gun and a 4 gun capacity units. The product line has the most complete range of cost effective Inverter welders available today. The line ranges from a 1000 amp to 2600 amp, systems available in 480/460V and 40 to 120Kw configurations. The largest unit weighs less than 300 lbs, making the...

Read More »

Engine-Driven Welder offers multi-process capabilities.

Offered in compact case, Vantage 500 Perkins-® is powered by 4-cylinder, 1,800 rpm turbo-charged diesel engine that meets EPA Tier 4i standards. Unit offers stick, TIG, MIG, flux-cored, and arc gouging mode, and can produce up to 12,000 W of continuous 1-phase ac generator power for common construction tools, while simultaneously welding at up to 250 A. With 20 gal fuel tank, unit offers 9 hr of...

Read More »

Portable Welder suits on-site welding applications.

Designed as dc stick welder and ac power generator, Outback-® 185 has smooth dc welding output of up to 185 A for welding steel, stainless steel, or cast iron, as well as hardfacing projects due to its ability to operate up to 5/32 in. stick electrode. It features front accessible engine control panels, 6.8 gal fuel tank, and Low-Lift(TM) grab bars that allow for lifting unit on and off truck...

Read More »
All-in-One MIG Welder facilitates set-up and use.

All-in-One MIG Welder facilitates set-up and use.

Millermatic 212 Auto-Set incorporates one feature that automatically sets proper speed and voltage after user inputs metal thickness and wire diameter. Along with infinite voltage control for manual fine-tuning of voltage and wire feed speed, welder offers Line Voltage Compensation for maintaining welding output in event of -

Read More »

Infrared Welding - A Beneficial Alternative to Hot Plates and Vibration Welding

About Infrared Welding For plastic parts, Infrared Welding can be a beneficial replacement for certain traditional hot-plate and vibration welding applications. The use of a controlled IR light source (heater) with accurately regulated time and temperature in a precise location allows more accurate process control on plastic assemblies. Different heat levels for varying welding conditions can be...

Read More »
Welder performs reflow soldering, heat bonding and staking.

Welder performs reflow soldering, heat bonding and staking.

Integrating pulsed temperature controller with PID feedback, HBR50 suits thermo-compression applications like hot bar reflow soldering flex circuits, ribbon cable and wires; heat seal bonding connectors; or attaching ACF connectors to printed circuit boards. It can also heat stake metal contacts to plastic, and can be configured with any combination of X, Y, Z, or theta stages to meet specific...

Read More »
Portable MIG Welder can weld up to 3/8 in. thick mild steel.

Portable MIG Welder can weld up to 3/8 in. thick mild steel.

Featuring Auto-Set(TM) technology to eliminate need to set voltage and wire feed speed, Millermatic-® 211 Auto-Set(TM) with MVP(TM) includes Multi-Voltage Plug (MVP) that allows user to quickly switch between 120 and 230 V without use of tools. Auto-Set allows user to dial in welding wire diameter and metal thickness. Compatible with Bobcat(TM) generators, welder comes complete with 10 ft M-10...

Read More »
Wire Welder suits aluminum/stainless steel welding.

Wire Welder suits aluminum/stainless steel welding.

Featuring Diamond Core Technology(TM), Power MIG-® 140 and 180 are designed for thin gauge steel, stainless and aluminum or on gasless flux-cored welding. With amperage range of 30-140 A, user can MIG weld single pass up to .135 in. and perform self-shielded flux-cored multiple pass welds up to 5/16 in. with Power MIG 140 models. Power MIG 180 models with amperage range of 25-180 A, can MIG weld...

Read More »
Miller to Introduce New Pipe Welding System, Improved TIG Welder and More at WESTEC 2009

Miller to Introduce New Pipe Welding System, Improved TIG Welder and More at WESTEC 2009

Visit Miller at Booth #4013 On display: PipeWorx(TM) Welding System, designed to streamline pipe fabrication. Also on display: Miller's Dynasty 200-® AC/DC TIG/Stick inverter now available in a complete water-cooled TIGRunner-® package. APPLETON, Wis., February 3, 2009-- Miller Electric Mfg. Co. will be presenting several new welding and plasma cutting solutions in booth #4013 at the WESTEC...

Read More »

All Topics