Electrical Power Generators

Engine-Driven Welder offers multi-process capabilities.

Offered in compact case, Vantage 500 Perkins® is powered by 4-cylinder, 1,800 rpm turbo-charged diesel engine that meets EPA Tier 4i standards. Unit offers stick, TIG, MIG, flux-cored, and arc gouging mode, and can produce up to 12,000 W of continuous 1-phase ac generator power for common construction tools, while simultaneously welding at up to 250 A. With 20 gal fuel tank, unit offers 9...

Read More »
Electrical Power Generators

Portable Welder suits on-site welding applications.

Designed as dc stick welder and ac power generator, Outback® 185 has smooth dc welding output of up to 185 A for welding steel, stainless steel, or cast iron, as well as hardfacing projects due to its ability to operate up to 5/32 in. stick electrode. It features front accessible engine control panels, 6.8 gal fuel tank, and Low-Lift(TM) grab bars that allow for lifting unit on and off...

Read More »
All-in-One MIG Welder facilitates set-up and use.
Arc / Resistance Welders

All-in-One MIG Welder facilitates set-up and use.

Millermatic 212 Auto-Set incorporates one feature that automatically sets proper speed and voltage after user inputs metal thickness and wire diameter. Along with infinite voltage control for manual fine-tuning of voltage and wire feed speed, welder offers Line Voltage Compensation for maintaining welding output in event of ±10% variations in primary power. Other features, aside from 160 A...

Read More »
Infrared Heaters

Infrared Welding - A Beneficial Alternative to Hot Plates and Vibration Welding

About Infrared Welding For plastic parts, Infrared Welding can be a beneficial replacement for certain traditional hot-plate and vibration welding applications. The use of a controlled IR light source (heater) with accurately regulated time and temperature in a precise location allows more accurate process control on plastic assemblies. Different heat levels for varying welding conditions can be...

Read More »
Welder performs reflow soldering, heat bonding and staking.
Staking Equipment

Welder performs reflow soldering, heat bonding and staking.

Integrating pulsed temperature controller with PID feedback, HBR50 suits thermo-compression applications like hot bar reflow soldering flex circuits, ribbon cable and wires; heat seal bonding connectors; or attaching ACF connectors to printed circuit boards. It can also heat stake metal contacts to plastic, and can be configured with any combination of X, Y, Z, or theta stages to meet specific...

Read More »
Portable MIG Welder can weld up to 3/8 in. thick mild steel.
Arc / Resistance Welders

Portable MIG Welder can weld up to 3/8 in. thick mild steel.

Featuring Auto-Set(TM) technology to eliminate need to set voltage and wire feed speed, Millermatic® 211 Auto-Set(TM) with MVP(TM) includes Multi-Voltage Plug (MVP) that allows user to quickly switch between 120 and 230 V without use of tools. Auto-Set allows user to dial in welding wire diameter and metal thickness. Compatible with Bobcat(TM) generators, welder comes complete with 10 ft...

Read More »
Spin Welder combines precision and usability.
Friction / Fusion Welders

Spin Welder combines precision and usability.

Driven by servo motor with accuracy of ±0.1°, Model SW300 is capable of welding circular joint interface parts with optimal control and consistent results. It incorporates mechanical, electrical, and pneumatic elements and can be configured to manual, semi-automated, or fully-automated plastics manufacturing environments. While 6 in. color touchscreen facilitates operation, linear...

Read More »
Wire Welder suits aluminum/stainless steel welding.
Arc / Resistance Welders

Wire Welder suits aluminum/stainless steel welding.

Featuring Diamond Core Technology(TM), Power MIG® 140 and 180 are designed for thin gauge steel, stainless and aluminum or on gasless flux-cored welding. With amperage range of 30-140 A, user can MIG weld single pass up to .135 in. and perform self-shielded flux-cored multiple pass welds up to 5/16 in. with Power MIG 140 models. Power MIG 180 models with amperage range of 25-180 A, can MIG...

Read More »
Miller to Introduce New Pipe Welding System, Improved TIG Welder and More at WESTEC 2009
Plasma / Flame / Laser Cutters and Cutting Machinery

Miller to Introduce New Pipe Welding System, Improved TIG Welder and More at WESTEC 2009

Visit Miller at Booth #4013 On display: PipeWorx(TM) Welding System, designed to streamline pipe fabrication. Also on display: Miller's Dynasty 200® AC/DC TIG/Stick inverter now available in a complete water-cooled TIGRunner® package. APPLETON, Wis., February 3, 2009-- Miller Electric Mfg. Co. will be presenting several new welding and plasma cutting solutions in booth #4013 at the...

Read More »
Compact Welder is offered as ready-to-use MIG package.
Arc / Resistance Welders

Compact Welder is offered as ready-to-use MIG package.

Featuring twenty-four overlapping heat (voltage) steps and flat and slope taps to allow accurate fine tuning, Migmaster 275 is rated 275 A at 40% duty cycle and 200 A at continuous 100% duty cycle. It features DC welding output from 30-300 A with heavy-plate parameters for 5/8 in. and above, tool-less polarity change, NAS gun connection with torch wrap, and spool-on-gun control. Wire feeder with...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers